|
Farmall & IHC Tractors Discussion Board |
Re: Got My 330 Utility Steering Fixed
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by TDK on October 21, 2005 at 19:32:48 from (64.12.117.13):
In Reply to: Got My 330 Utility Steering Fixed posted by Tweeter on October 21, 2005 at 19:18:14:
The shims keep the worm from working up and down. Since you say that's ok, then it's probably the nipple - to - worm gear clearance. The adjustment is on the right side of box. It's a screw with a locknut on it. Loosen locknut and, with wheel straight ahead, turn screw in until it bottoms out. Then back screw out 1/8 -1/4 turn. Now turn wheel lock to lock and see if you feel any binding. If binding, back screw out another 1/8 turn. When this adjustment is OK, then find an identical screw on the left side of box and adjust the same way. *P.S. - These adjustments are done with front end on stands, wheels off floor.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Nuffield Tractor: Conclusion - by Anthony West. In the last piece I mentioned that Nuffield had reached the stage where they had chosen to drop the "Universal" from production. The two new models were given three figure numbers, instead of "three" and "four". Model numbers were introduced to help farmers and dealers instantly recognize the engine size and horsepower of the tractor, the 4/60 had a four cylinder diesel engine which developed 60 bhp at 2,000 rpm. The 3/42 had a 3 cylinder diesel engine which produced 42 bhp at 2,000 rpm. Th
... [Read Article]
Latest Ad:
1952John Deere MT tractor
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
