|
Farmall & IHC Tractors Discussion Board |
Re: Anybody have a picture?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Paul in Mich on March 06, 2005 at 15:39:16 from (64.12.117.13):
In Reply to: Anybody have a picture? posted by David B on March 06, 2005 at 14:20:32:
David, The control rod comes in 3 segments. The front attaches to the shuters, then into a square brass block, called the control rod carrier (bottom). From there a straight rod with a stop screws into the same carrier (top) behind the stop there is a bracket that bolts to the rear generator mounting hole on the engine block. From the rear gas tank mount there is a mounting bracket from which the rear control rod feeds in from the rear, and connects with the coupling. YOu will want a washer on either side of the rear bracket and insert cotter pins to keep the rear control rod stationary. From there it is a mater of making sure everything clears the carb (rear) and the air cleaner body (rear). It all fits but clearances are close. Let me know how it all goes, as it is sometimes difficult to know if the instructions are recieved as they are meant to be.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Nuffield Tractor: Conclusion - by Anthony West. In the last piece I mentioned that Nuffield had reached the stage where they had chosen to drop the "Universal" from production. The two new models were given three figure numbers, instead of "three" and "four". Model numbers were introduced to help farmers and dealers instantly recognize the engine size and horsepower of the tractor, the 4/60 had a four cylinder diesel engine which developed 60 bhp at 2,000 rpm. The 3/42 had a 3 cylinder diesel engine which produced 42 bhp at 2,000 rpm. Th
... [Read Article]
Latest Ad:
1952John Deere MT tractor
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
