Re: Anybody have a picture?

Posted by Paul in Mich on March 06, 2005 at 18:02:02 from (205.188.117.13):

In Reply to: Re: Anybody have a picture? posted by David B on March 06, 2005 at 16:49:01:

Dave, I"m not sure I know what you are saying. The shutter rod assembly begins with the flat side of the front rod connected to the shutter clevis on the bell crank. the front rod"s bow is outward with the ends toward the tractor. The end closest to the operator ends at the fuel tank support bracket and does not extend to the throttle area. That is the extent of the shutter assembly. If you have the distillate or kerosene exhaust manifold with the damper, there is an additional control lever and linkage that mounts under the fuel tank, but unless you have this manifold, the control lever and linkage is irrelevant.

Follow Ups:

• Re: Anybody have a picture? David B 20:48:37 03/06/05 (2)
  • Re: Anybody have a picture? Jim Becker 19:12:07 03/07/05 (0)
  • Re: Anybody have a picture? Paul in Mich 05:53:58 03/07/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]