Re: 1026 Hydrostatic tranny

Posted by Steven@nd on May 19, 2002 at 09:52:04 from (12.23.184.18):

In Reply to: 1026 Hydrostatic tranny posted by Curt on May 18, 2002 at 19:55:29:

Can it be used for heavy tillage? Yes. Were they built to do it? I've never seen any IH manual that said you can't.

However, we had a 656 hydro and used it only for loader work and the hydro was getting weak around 7000 hours with no heavy tillage ever done with it. Starting it and using it for feeding when it was 20 below might have hurt it also.

Personally, I wouldn't use a hydro to pull hard very long - they are way more useful on loaders, habines, snowblowers, and combines.

Steven

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1026 Hydrostatic tranny Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]