Farmall & IHC Tractors Discussion Board |
300 U blowing oil out PTO air vent cap
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Duane on April 20, 2002 at 19:26:29 from (142.165.222.151):
Can't figure this one out. Been cutting tall grass all day and have found when I disengage the pto I get oil coming under pressure from the PTO breather cap,when the PTO is engaged and I am cutting it does not blow out any oil. I unscrewed the breather cap and oil came out of the hole as if it were too full. The two things that I have done lately,but shouldn't influence this was 1. put a new breather cap on the PTO housing. 2 Was to adjust the band as it was slipping under the heavy load of tall grass. Thought maybe the fluid level was too high, but it isn't.If any thing I would expect more so to see oil coming out while in operation.I cut for most of the day and never had any loss at all.However the trip home disengaed I probably lost a 1/2 quart. Whats up?
Follow Ups:
Home
| Forums
Today's Featured Article -
A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|