Re: projects

Posted by LumbrJakMan on June 08, 2007 at 03:18:34 from (64.12.117.8):

In Reply to: projects posted by tom nj on June 07, 2007 at 17:47:00:

Be ready for roughly 1 hour prep time just to get the new actuators to fit in your housing. I have done several sets of disc brakes . One on a Super C, one on a B-414 and recently my Super M . The actuators work very well after you grind them enough to get them to fit. I was pretty upset that the quality control of these parts was over looked . They are made in Turkey and they come close at best . at least they were oversized and not to small. Also good advice on greasing up the internals of the actuators . My Super M would not stop with me ( 300 LBS) standing on the peddles , now I use one foot and they can drag dirt if I choose .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]