Update 884 hydraulics problem

Posted by Tom884 on April 08, 2007 at 13:40:23 from (67.170.47.73):

Again problem is that I have no loader up or down, no rear hydraulics, and steering is only barely there. I checked the filter(clean), pilot relief valve (no issuses and screen on it was clean), and the Flow divider which all looked good and had no issues that I could see. Only thing left is the filter screen under filter housing oin top of filter when you pull the filter off MCV. hat is only thing other than the pump.

Only other thing I noticed was it looked to me as if there was not enoough fluid in the system. I drained the case before starting all of this and about 6 gallons came out. I know some will be trapped in the system as it runs the power steering up fron etc, but 3 gallons give or take?

Could it be that problem was low fluid? It has the dipstick on side of tractor just in front of MCV but mine has no markings on whether or not it is full. I do not want to mess around and hurt it even more by filling it bck up with 6 gallons only to find out that it needed another 3.

Again as before thanks for any offerings of help you can give.
TOM

Replies:

• Re: Update 884 hydraulics problem georgeky 15:28:33 04/08/07 (0)
• Re: Update 884 hydraulics problem Fromjb2 15:13:43 04/08/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]