Re: Rod Knocking in my M

Posted by Michael Soldan on March 20, 2001 at 14:24:11 from (216.46.140.186):

In Reply to: Rod Knocking in my M posted by jiM on March 20, 2001 at 05:28:45:

Jim, I like the response Ross made as a starting point. Someone was on a chat line telling about a friend who welded a manifold still on the tractor and the welding splatters went down the chamber and chewed on the top of the piston. You said you had just changed manifold gaskets, could any piece of old gasket or other debris have gotten down into the cylinder? That sounds like a starting point , I hope you don't have to go the whole nine yards..Good luck from Mike Soldan in Exeter Ontario!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Rod Knocking in my M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]