Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Tractor Pulling Discussion Forum

also.....

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Redman

05-25-2005 19:04:20




Report to Moderator

since you bring it up,it just so happens that we have a green and a red combine.
9610 and a 1680,the 1680 does all of the corn as the big green feedmill grinds the corn too much.
and if you would like to talk about JDs top notch rotor i'll put you in touch with my cousin who happens to have a 9750,service truck should go with them when they leave the dealers lot and tow it behind the combine.
his sets almost as much as it goes,and to think it only took deere 20 years to come out with a rotor that is #2 behind the red one.

[Log in to Reply]   [No Email]
G/MAN

05-26-2005 15:27:00




Report to Moderator
 Re: also..... in reply to Redman, 05-25-2005 19:04:20  
Sounds like somebody needs to show you how to set a combine.



[Log in to Reply]  [No Email]
Redman

05-26-2005 19:40:03




Report to Moderator
 Re: also..... in reply to G/MAN, 05-26-2005 15:27:00  
oh i can set them just fine,dew in the morning and they have to be set.
need to be set when the dew drys off and again in the evening when dew comes on.
red one,set it and run it.



[Log in to Reply]  [No Email]
Redsleds

05-31-2005 05:41:40




Report to Moderator
 Re: also..... in reply to Redman, 05-26-2005 19:40:03  
if they are so good then why have they been sold so many times ? you ever had 63.5 test weight corn ? i shouldn't asked that you are better because you have a redgirl tractor .i'll put our 9600's up against them and show ya never have any volunteer in our fields and always get anumber one sample when we sell it , so must be the way the combine is set !!!



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy