Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Oliver, Cletrac, Co-op & Cockshutt Tractors Discussion Forum
:

Oil and orifice size

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Jim Meade

05-02-2007 15:04:16




Report to Moderator

Tom at O'Brien County Implement said that an important factor is the size of the orifices in the oil channels. My tractor was designed for 80-90 oil and he would not recommend moving away from it.
FWIW




[Log in to Reply]   [No Email]
newter haven

05-02-2007 21:47:34




Report to Moderator
 Re: Oil and orifice size in reply to Jim Meade, 05-02-2007 15:04:16  
We've run 15/40 for a number of years in all of our vehicles, lawn mowers to over road trucks. Just hard to beat. Have to agree with Tom, though, certain compartments need different lubrication according to manufactures specs. Good luck!



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy