|
Watch it - you're going to get somebody ticked off. How dare I&T sell a manual geared for somebody who is already experienced as a mechanic and needs some hard facts without the added fluff. The older manuals from the 50s - make it very clear with the following in the intro: "Contained in it are the necessary specifications and the brief but terse procedural data needed by a mechanic . . . " Note the words "brief" and "mechanic." Also explained is . . . data is NOT included for . . . "carburetors, clutches, ignition units, generators, regulators, and starting motors." All that is covered in a separate I&T book - that of "Standard Units." I've got a stack of them - they are a fantastic refernce source. I&T also made some excellent "service manual and pricing guide" books. For example, I have one printed 1960, priced at $4.95 that covers Deere MC, 40C, 420C, 430C, 440IC, and 440ID. It gives repair and flat-rate pricing information. It's 144 pages and has some infomation you'd have a hard time finding these days. But - maybe the hourly shop rates are a little outdated?? It shows a range - for shop labor charges - from $2.50 and hour - up to $7.50 per hour. It does seem though, that as time goes on, I&T has put less of the disclaimer in the intro, raised the prices way up, and perhaps are attempting to cater to a different market. I haven't bought a new one in years - but have noticed the price tags.
|