Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Allen Machine Works info

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Duane Larson

12-07-2005 17:25:47




Report to Moderator

Gerald,
Taper-loc flywheels are made and sold by Allen Machine Works, 100 Fairview Circle, Jonesborough, TN 37659. Phone 423-753-5738. The business is owned by George Range, who bought it from Chester Allen. Chester bought the concept years ago from a machine shop, and developed and improved the taper-loc concept. He sold the business a couple of years ago to George. If you have technical questions about the flywheels, ask for Dave - he is the fellow who makes the flywheels. Ask for the price of a F1226R - that is the one for a 70G. You might also ask if they have any rebuilt ones available, or they can likely rebuild yours. Check their prices - nice guys.

[Log in to Reply]   [No Email]
Sam in TN

12-07-2005 20:23:31




Report to Moderator
 Re: Allen Machine Works info in reply to Duane Larson, 12-07-2005 17:25:47  
I live in middle TN near Nashville, what kills you on the cost of the Taperlock Flywheel, especially if you buy it from someone other than George, is the freight to ship it to and then back, around $100 each way average. I called George and just took off one day, drove over there and Dave was waiting for me. They rebuilt and machined the Flywheel off my A in about 3 to 4 hours. Cost me $320 and a Tank full of gas (back this summer pre hurricane) they are great to work with. I was back home before dark and had the tractor running by supper. Like Duane said, you might call them as they had several spares for various models in their shop or if your close enough drive over.

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy