Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

jd 70 gas with loose flywheel

Welcome Guest, Log in or Register
Author 
Gerald Maize

12-07-2005 09:47:13




Report to Moderator

I have my grandfather's John Deere 70 gas tractor which has had the engine rebuilt. The fly wheel keeps coming loose. It will idle without it coming loose but once under a load doesn't take long. Any ideas or experience from others will be appreciated.




[Log in to Reply]   [No Email]
Miller49G

12-07-2005 18:07:06




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
I had the end of my John Deere G crank fixed it only cost about $300.00 to fix the clucth driver side of the crank shaft. The man that fixed the crank shaft was Mike Williams in Clinton, Ia his phone is 1-563-243-3023. Also you can look at my web page tab crank rebuild.



[Log in to Reply]  [No Email]
Duane Larson

12-07-2005 17:25:47




Report to Moderator
 Allen Machine Works info in reply to Gerald Maize, 12-07-2005 09:47:13  
Gerald,
Taper-loc flywheels are made and sold by Allen Machine Works, 100 Fairview Circle, Jonesborough, TN 37659. Phone 423-753-5738. The business is owned by George Range, who bought it from Chester Allen. Chester bought the concept years ago from a machine shop, and developed and improved the taper-loc concept. He sold the business a couple of years ago to George. If you have technical questions about the flywheels, ask for Dave - he is the fellow who makes the flywheels. Ask for the price of a F1226R - that is the one for a 70G. You might also ask if they have any rebuilt ones available, or they can likely rebuild yours. Check their prices - nice guys.

[Log in to Reply]  [No Email]
Sam in TN

12-07-2005 20:23:31




Report to Moderator
 Re: Allen Machine Works info in reply to Duane Larson, 12-07-2005 17:25:47  
I live in middle TN near Nashville, what kills you on the cost of the Taperlock Flywheel, especially if you buy it from someone other than George, is the freight to ship it to and then back, around $100 each way average. I called George and just took off one day, drove over there and Dave was waiting for me. They rebuilt and machined the Flywheel off my A in about 3 to 4 hours. Cost me $320 and a Tank full of gas (back this summer pre hurricane) they are great to work with. I was back home before dark and had the tractor running by supper. Like Duane said, you might call them as they had several spares for various models in their shop or if your close enough drive over.

[Log in to Reply]  [No Email]
jdman(MO)

12-07-2005 14:02:31




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
Had same problem on 50B, removed flywheel, cleaned splines, and applied JB weld Professional. This JB weld comes with a primer, and I believe I got it at Auto Zone. Retorqued bolts and let set 24 hours. It has been 8 years and the flywheel has not moved. If you need to remove it later, apply heat and it will come off. Russ



[Log in to Reply]  [No Email]
G/MAN

12-07-2005 13:19:57




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
What hasn't been mentioned about the Taper-Lock flywheels is that they are pretty expensive. Most of $1000 last I checked. I believe Albert at Renaissance Tractor was doing some spline restoration on crankshafts with this problem. At the time, I think it was limited to diesel cranks, but he might have expanded to gas-burners. You might be able to have your crankshaft repaired and find a good used flywheel for less money than a Taper-Lock. Or with a little searching, you might be able to find a good used crankshaft and flywheel. There are several big JD two-banger salvage yards around the country. Seeing as how loose flywheels aren't as prevalent on gas-burners as on diesels, you can probably find good used parts yet. You'll just have to compare the cost of labor/parts of all three options and parts availability and decide what is best for you.

[Log in to Reply]  [No Email]
720Deere

12-07-2005 14:45:51




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to G/MAN, 12-07-2005 13:19:57  
G/Man,

If you buy direct from Allen Machine in TN, including shipping a new taperlock should only be a little over $600.



[Log in to Reply]  [No Email]
G/MAN

12-07-2005 16:26:29




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to 720Deere, 12-07-2005 14:45:51  
I was under the impression they were closer to $800, but that might have been through a reseller.



[Log in to Reply]  [No Email]
720Deere

12-08-2005 05:38:26




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to G/MAN, 12-07-2005 16:26:29  
They are if you buy them from Polk, Dengler and others. As mentioned below, double shipping doesn't help there pricing. The flywheel for the 70d was around $500 plus about $95 shipping. Dave said it was actually cheaper to purchase a new flywheel rather than have ours retrofitted since you would have two way shipping to pay for. I believe they have a foundry in NC casting new flywheels that they then machine for the taperlock. Somebody correct me if I'm wrong.

[Log in to Reply]  [No Email]
wilamayb

12-07-2005 15:53:06




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to 720Deere, 12-07-2005 14:45:51  
Where is Allen Machine? I am a Tennessean and will be doing some major work on a 730D some time in the near future. What services Does Allen machine offer? Crank, cam, block etc. I hope. Thanks!!!!



[Log in to Reply]  [No Email]
gerald maize

12-08-2005 06:20:32




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to wilamayb, 12-07-2005 15:53:06  
my machine shop told me this am they have put a tapered flywheel on. I'm not sure of the cost just yet and maybe will have to take out a loan! I do live in nc less than 2 hrs from allen machine shop and they said they could probably use mine for a core if it has no cracks. Thanks for all the input.



[Log in to Reply]  [No Email]
Blksmok

12-07-2005 12:48:50




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
Gerald...follow Buickanddeere's advice as one last attempt to fix the problem. If that doesn't work do not run the tractor. Get a taper-lock flywheel before the end of the crank breaks off or the flywheel gets loose and causes material and personal damage.



[Log in to Reply]  [No Email]
8e3k0

12-07-2005 10:38:31




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
If your flywheel is coming lose after torquing properly the damage is likely set in to the flywheel splines already and partially to your crank splines. By installing new higher tensile bolts and torquing up will only develope radial hairline cracks on that worn flywheel from the spline area. Replace with a Taper Loc and eliminate the possiblity of original worn flywheel doing more damage to the splines and/or personal injury.
Ellis

[Log in to Reply]  [No Email]
buickanddeere

12-07-2005 15:18:22




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to 8e3k0, 12-07-2005 10:38:31  
I suspect the flywheel isn't being torqued properly. Either no torque wrench is being used and/or stretched bolts.



[Log in to Reply]  [No Email]
G/MAN

12-08-2005 15:18:02




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to buickanddeere, 12-07-2005 15:18:22  
Or "replacement" hex-head bolts in place of the factory square-heads...



[Log in to Reply]  [No Email]
buickanddeere

12-07-2005 10:05:50




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
Try clean splines and grade eight bolts etc. There are several posting here to be found under the search function. Odds are some tinkerer didn't use a torque wrench or new bolts when re-installing the flywheel.



[Log in to Reply]  [No Email]
Mike M

12-07-2005 09:56:45




Report to Moderator
 Re: jd 70 gas with loose flywheel in reply to Gerald Maize, 12-07-2005 09:47:13  
It may need a taperlock flywheel to take up for a worn crank. Search the archives somewhere in there is the phone number for Allen Machine in Tenn. they can fix you up.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy