Mike, I checked over the clutch cover and there is not a ridge on it. It is completely smooth all the way around. I tried to get it on nice and tight yesterday, but after 20 minutes of mowing it came off. Only problem was I didn't see it until the mower ran over it. So - now I'll be getting a new one, and a new blade for the mower also. I didn't have a good day yesterday. I did adjust the clutch the way Frank said to do. It is working so far. Has a nice tight snap to it right now. If it continues to be a problem I guess I'll have to splurge on all new clutch parts. I've been trying to determine my burn rate. I'm guessing around 2gph is close, especially in the heavy tall grass when the mower is really working the tractor. I brought her back to low gear last evening as the grass was super tall and the tractor was working too hard, even in second. I'm also going to check and see if my adjustment bolts are hitting the cover. I think that is a big possibility. I'm sure I'll have more questions soon, and I appreciate your time. I've got to adjust the wheel bearings this week. That seems like a straight forward job. Thanks again. TOM
|