Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Where in PA?

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
John51

12-11-2004 12:45:15




Report to Moderator

If you aren't too far away you can come look at mine with power steering and live PTO. Not far from Williamsport.




[Log in to Reply]   [No Email]
Tom in PA

12-11-2004 12:57:52




Report to Moderator
 I'm in Jersey Shore in reply to John51, 12-11-2004 12:45:15  
John,

I'm in Jersey Shore and I would like to come and see your machine, especially since it will give me a better understanding of the overall machine itself. You can email me directly (off the board) at [email protected] and we can make an arrangement that is suitable for you.

These model 45 loaders - I'm assuming they are trip buckets - correct? Is it possible to convert a trip bucket to a powered bucket?

What about the availability of a blade? I'm a rookie at this, but I understand that just about any 3pt attachment blade will hook to most 3 pt hitches... right?

And - I don't know if I want to post this question or not - but someone tell me why I should go w/ a model 60 rather than a Farmall H (or M) -

Thanks TOM

P.S. John -- I'll look for your email.

[Log in to Reply]  [No Email]
TP from Central PA

12-12-2004 11:53:54




Report to Moderator
 Re: I'm in Jersey Shore in reply to Tom in PA, 12-11-2004 12:57:52  
I wouldn't jump into anything..... ....You can really get good buys on two cylinders anymore at consignment sales such as "Dick's Tractors"(Has one on New Years day) and "Fraley's" in the fall or spring.

Got a '49 A at Fraley's acouple years ago and aside a carb/mag. rebuild she is a hard runner.

For what your doing I'd find a Farmall 300. They have a foot clutch, fast-hitch that you can convert to 3pt. and the Hydraulic valves work well with a loader.

Sorry to hear about the loss of your home. Ivan was pretty bad. I am in Nisbet and we had alot of the township underwater.

[Log in to Reply]  [No Email]
Tom in PA

12-12-2004 14:24:14




Report to Moderator
 Flood waters in reply to TP from Central PA, 12-12-2004 11:53:54  
TP

I should clarify that we didn't actually lose the home in the flood. We did however have serious damage. We're pretty much back to normal now. I rewired the downstairs, installed a new water heater, replaced quite a bit of insulation, and cleaned, cleaned, then cleaned some more. What a mess.

When the water started coming in the basement it was rising at the rate of 6-8 inches every 15 minutes. The force of the water actually blew holes in the mortar of our stone foundation. I suppose that's better than the foundation caving inward, which we were seriously concerned about. When we were forced to evacuate the water had started running in the windows in the basement like waterfalls. At that point I shut the 4 pumps off and gave up.

There were many homes in Lycoming County that had more damage than ours, in some ways we were fortunate.

I fly a helicopter for a living, and the morning of the flood we were flying around the Lycoming Creek Road, (and various other places in Lycoming/Clinton Counties). The devistation was unbelievable. Not as bad as 96 in my opinion, but still bad...

The land that we just bought is on top of a small hill. If our house floods up there they'll need Noah's Ark in town.

Regards,

TOM

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy