Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

269 Q?

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
RickB

07-16-2006 14:41:17




Report to Moderator

Does the 269 have the adjustable feeder back like most other NH balers with feeder forks?




[Log in to Reply]   [No Email]
Chick

07-16-2006 15:02:04




Report to Moderator
 Re: 269 Q? in reply to RickB, 07-16-2006 14:41:17  
It has a feeder RACK. You cannot adjust one tine or another, but must adjust several at a time. I did bend and straighten some of the tines.



[Log in to Reply]  [No Email]
RickB

07-17-2006 03:20:12




Report to Moderator
 Re: 269 Q? in reply to Chick, 07-16-2006 15:02:04  
I mean an adjustable panel just in front of the twine box, the rear panel of the feeder RACK area. On many NH balers with feeder forks, this panel can be shifted fore & aft to direct more or less hay to the left side of the chamber.



[Log in to Reply]  [No Email]
Chick

07-18-2006 18:21:54




Report to Moderator
 Re: 269 Q? in reply to RickB, 07-17-2006 03:20:12  
Yes, this has the adjustable rack. On another NH beler I had, you could adjust individual forks, but not on the 269.



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy