Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

Scott Flynn - 210-B power steering

Welcome Guest, Log in or Register
Author 
Mike Johnston

06-08-2006 19:44:25




Report to Moderator

Do you still have that powersteering repair kit part number? I still haven"t repaired mine, and can"t find where I wrote down that kit number and can"t find the old post in the archives.

The steering cylinder is dumping fluid nearly as fast as I fill up the reservoir.

Thanks again,
Mike Johnston




[Log in to Reply]   [No Email]
Scott Flynn

10-09-2006 12:58:09




Report to Moderator
 Re: Scott Flynn - 210-B power steering in reply to Mike Johnston, 06-08-2006 19:44:25  
Sorry I didn"t catch your post. Got busy with things this summer and hadn"t posted in a while. Did you have any luck obtaining the parts?



[Log in to Reply]  [No Email]
Joe (Wa)

06-09-2006 08:06:21




Report to Moderator
 Re: Scott Flynn - 210-B power steering in reply to Mike Johnston, 06-08-2006 19:44:25  
310-B power steering discussion.



[Log in to Reply]  [No Email]
Mike Johnston

06-09-2006 10:30:16




Report to Moderator
 Re: Scott Flynn - 210-B power steering in reply to Joe (Wa), 06-09-2006 08:06:21  
Thats it, thanks Joe.



[Log in to Reply]  [No Email]
BarryfromIA

06-08-2006 20:49:24




Report to Moderator
 Re: Scott Flynn - 210-B power steering in reply to Mike Johnston, 06-08-2006 19:44:25  
Have you thought about using power steering stop leak fluid. I filled steering on my 210b-h several years ago. Its been good ever since. Steering is kinda slow in cold weather on start up, but is good after a short warm up.



[Log in to Reply]  [No Email]
Mike Johnston

06-09-2006 10:31:53




Report to Moderator
 Re: Scott Flynn - 210-B power steering in reply to BarryfromIA, 06-08-2006 20:49:24  
Tried stop leak, but its just too bad. Must be a cut O-ring.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy