Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Case Tractors Discussion Forum
:

Hey DKase

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
SupC

07-30-2006 11:42:27




Report to Moderator

What you ares saying is I should be able to swap axle,axle housing and hubs from a 600,900,etc. and the housing should fit by rearend housing. Is the bull sprocket the same between these teractors where it splines onto the axle or are they 2 different sizes? Thanks for the help,Willie




[Log in to Reply]   [No Email]
DKase

07-30-2006 17:40:47




Report to Moderator
 Re: Hey DKase in reply to SupC, 07-30-2006 11:42:27  
I have never looked into the subject very far. I do not have the parts books to tell me if the part numbers are the same. The guy that was going to get the parts from me was going to get the sprockets and all. Someone else out there should have a solid answer. DK



[Log in to Reply]  [No Email]
SupC

07-30-2006 18:41:27




Report to Moderator
 Thanks DKase in reply to DKase, 07-30-2006 17:40:47  
I have the part number for the 930 if anybody out there has part book for a 900 and 600 I'd appreciate the help. Thanks,Willie



[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy