FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

• Support

Ford 9700 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Master Cylinder Repair Kit - This Brake Master Cylinder Repair Kit contains (2) 1-1/8 inch diameter pistons, (2) C7NN2173A cups, (2) C7NN2004A spring and retainers, (2) 277688 snap rings, (2) C7NN2180A boots. Replaces OEM part number C7NN2004A. Fits 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW5. (Item #: 156042, Ref: C7NN2004A) $43.00

Dual Brake Master Cylinder - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number C7NN2140A, D3NN2140A, Fits cylinders with external line. Customer removes plug, and reuses fitting, Can be used to replace cylinder with reservoir. Customer must reuse original reservoir, (Item #: 164799) $475.00

Clutch

Clutch Bearing - Pilot - Pilot Ball Bearing, for PTO Drive Plate. Inside diameter 1.4370 inch, outside diameter 2.6772 inch, width 0.5906 inch. Replaces 83992560, F0NNN779AA (Item #: 108005, Ref: F0NNN779AA) $16.30

Clutch Disc - Clutch Disc, 13 inches, 10-spline, 1-3/4 inches hub, 9 pads. For tractor models 8000, 8700, 9000, 9700. (Item #: 176457, Ref: D1NN7550C) $174.00

No
Picture
Clutch Disc - For Ford tractor models TW5, TW10, 5110, 5340, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8200, 8210, 8240, 8340, 8530, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction & industrial models 8400 Replaces Ford OEM number 82011591, , Compatible with New Holland tractor models TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 82011591, 81871404, F1NN7550BA, 82004602, Pads: 6, Diameter: 13", Center: Springs, Splines: 10, Spline Diameter: 1.75", (Item #: 174024) $264.00

No
Picture
Clutch Kit - This new single stage clutch kit contains a 13 inch, 4 finger pressure plate assembly (D8NN7563BA), a new 13 inch, 10 spline, 1 3/4 inch hub, 6 button clutch disc (82011591), new release bearing (N1585), and new pilot bearing (6108). For Models 8400, TW10, TW5, 7910, 8000, 8200, 8210, 8530, 8600, 8700, 9000, 9200, 9600, 9700. (Item #: 172923, Ref: CLK107) $550.00

Clutch Pack Housing - This Clutch Pack Housing comes without clutches. It replaces original part numbers 83931457, D0NN7R036A, D0NN7R036B, D2NN7R036A, D2NN7R036B, D3NN7R036A, D5NN7R036A, D5NN7R036B, D6NN7R036A, D8NN7R036AA, E0NN7R036AA, E0NN7R036AB. (Item #: 179282, Ref: E0NN7R036AB-B) $381.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A) $5.10

No
Picture
Clutch Plate - For Ford tractor models TW5, TW10, 5110, 5640, 6410, 6640, 6810, 7740, 7810, 7910, 8000, 8100, 8200, 8210, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number 82006010, 86640486, D1NN7550C, E8NN7550PA, Size: 13", Hub Size: 1-3/4", Spline Count: 10, Disc Type: 9 Pad, Disc Center: Spring (4 Spring), (Item #: 176940) $279.72

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Item #: 166322, Ref: C5NN7A615A) $6.20

Friction Plate, Select-O-Speed #2 or #3 - For tractor models 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Item #: 152079, Ref: C0NN7B455A) $73.00

Pressure Plate, 13 - 4 lever, long style, heavy duty, with new cast plate. For tractor models 8000, 8100, 8200, 8210, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW5 all indep. PTO with or without dual power. Replaces D8NN7563BA, C9NN7563B, 133002010 (Item #: 169921, Ref: D8NN7563BA-RHN) $190.00

Pressure Plate Assembly - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7840, 8240, 8340, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS100, TS110, Pressure Plate Size: 13", Pressure Plate Levers: Diaphragm, Pressure Plate Springs: Diaphragm, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206267, (Item #: 122250) $332.00

Release Bearing - This Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, width 0.8700 inches. This is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, 82010859, 83914247, 83933520, 83946908, 86534551 and N3004. (Item #: 112189, Ref: N1585) $25.60

Release Bearing Carrier - Used on: TW10, TW5, 5000 (W/ Dual Power and 12 inch Clutch; 1973>), 5110 (1981> W/ Syncronized Transmission), 5610 (1985> W/ Syncronized Transmission), 6410 (1981> W/ Syncronized Transmission), 6610 (1981> W/ Syncronized Transmission), 6710 (1981> W/ Syncronized Transmission), 6810 (1981> W/ Syncronized Transmission), 7610 (1981> W/ Syncronized Transmission), 7710 (1981> W/ Syncronized Transmission), 7810 (10/1985> W/ Syncronized Transmission), 7910 (10/1985> W/ Syncronized Transmission), 8000, 8200, 8210 (10/1985> W/ Syncronized Transmission), 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700 Replaces D9NN7571AA, D8NN7571BA, D8NN7571AA, C9NN7571A, C7NN7503A, 8776010, 87767009, 83919107, 81820438, E1NN7571BA, 83927906 (Item #: 179421, Ref: E1NN7571BA) $130.00

Cooling System

Fan Blade - 6 - For Ford tractor models TW10 (with AC), TW20 (with AC), TW30 (with AC), 9700 (8/1976-1978), Replaces Ford OEM number D5NN8600G, 22' Diameter, 0.625" Pilot Hole, 2.500" Ctr on Mounting Holes, (Item #: 163839) $202.00

Fan Pulley - This Fan Pulley is used on Ford / New Holland models 8400, TW10, TW20, TW30, 8000, 8200, 8700, 9000, 9600, 9700. Replaces D2NN8610B, 83913833 (Item #: 168130, Ref: D2NN8610B) $194.00

Radiator - This radiator fits the following tractor models: 8700 and 9700. The core measures 24 13/16 inches high and 22 1/8 inches wide and has 4 rows of tubes. Replaces part numbers: D5NN8005P and D5NN8005S. (Item #: 101873, Ref: D5NN8005P) $880.00

Radiator - For Ford tractor models 8700 (8/76-12/78), 9700, Replaces Ford OEM number D5NN8005S, D5NN8005P, Overall Height: 31-1/8", Overall Width: 24", Core Height: 24-13/16", Core Width: 22-1/8", Depth: 2-11/16", Rows: 5, Fill Neck Height: 2-3/4", Inlet: 1-3/4", Outlet: 2", With Oil Cooler, Additional Handling & Oversize Fees Apply To This Item, (Item #: 150279) $900.00

Radiator Hose - Lower - For Ford tractor models 8000 (8/1/'76-later), 8700, 9000 (8/1/'76-later), 9700, Replaces Ford OEM number D6NN8286C, 1.75" I.D., 2.0" I.D., For Hose Clamp use Item #: 130469, (Item #: 159651) $29.50

Radiator Hose - Upper - For Ford tractor models 8000 (8/1/'76-later), 8700, 9000 (8/1/'76-later), 9700, Replaces Ford OEM number D8NN8260CA, 1.75" I.D., For Hose Clamp use Item #: 130455, (Item #: 159653) $18.20

Thermostat - Thermostat, 168 degrees. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Dexta, Super Dexta. (Item #: 178010, Ref: D8NN8575AAWG) $10.00

Thermostat - 172 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Item #: 185072, Ref: D8NN8575CAWG) $22.60

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford/New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Item #: 117438, Ref: E6NN8513AA) $3.80

Water Pump, with Single Pulley. - Includes Gasket. Fits 7810, 7910, 8210, 8700, 9700, 8530, 8630, 8730, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces EAPN8A513G. (Item #: 100562, Ref: EGPN8A513BA) $105.00

Decals and Emblems

No
Picture
Decal Set - Hood only set for 9700. (Item #: 183445, Ref: R4142) $86.00

Drive Train

Drive Plate Bearing - Measuring 2.68 inches outside diameter, 1.43 inches inside diameter, 0.59 wide. It is listed here as a Transmission Drive Plate bearing but has other applications. Replaces OEM numbers 47508382, 81811675, 81816675, C5NNN779A, C5NN779B, 83992560, F0NN779AA, C5NNN779B, F0NNN779AA. Used on Ford 4400, 4500, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8030, 8100, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TS100, TS110, TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 108005, Ref: C5NNN779B) $16.30

Input Shaft - This Input Shaft is 15.28 inches long. 8000, 9000, 8600, 9600, 8700, 9700, TW10, TW20, TW30, TW5, TW15, TW25, TW35 (9/1969-1990). (Item #: 178923, Ref: D8NN7017AA) $283.00

PTO Drive Clutch Valve Support - For Ford tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number C7NNB787A, (Item #: 104216) $197.00

PTO Drive Hub - Heavy - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5640, 8000 (9/69-1978), 8200 (9/69-1978), 8400 (9/69-1978), 8530, 8600 (9/69-1978), 8630, 8700 (9/69-1978), 8730, 8830, 9000 (9/69-1978 with 8 speed transmission), 9200 (9/69-1978 with 8 speed transmission), 9600 (9/69-1978 with 8 speed transmission), 9700 (9/69-1978 with 8 speed transmission), Replaces Ford OEM number D8NNN778AA, 778AAN, 83913005, 87554790, 22 spline hub, (Item #: 104217) $158.00

PTO Drive Shaft - 37.5" Long - For Ford tractor models TW10, TW20, TW30, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700 (all 1968-8/69), Replaces Ford OEM number C7NN7A684D, 37.50" Long, 20 Spline, For PTO Drive Hub use Item #: 104264, (Item #: 110534) $393.00

PTO Shaft - Internal Drive - For Ford tractor models 8000, 8200, 8400, 8600, 8700, 9200, 9600, 9700 (all with 8 Speed Transmissions), Replaces Ford OEM number D8NN7A684BA, 83913004, 87712922, Length: 37.50", Splines: 22 & 25, For use with PTO Drive Hub use Item #: 104217, (Item #: 110535) $400.00

PTO Shaft - Internal Drive - For Ford tractor models 8000, 8200, 8400, 8600, 8700, 9200, 9600, 9700 (all with 8 Speed Transmissions), Replaces Ford OEM number D8NN7A684BA, 83913004, 87712922, Length: 37.50", Splines: 22 and 25, For use with PTO Drive Hub use Item #: 104217, (Item #: 110535) $400.00

Electrical System

Alternator - 12 volt, 51 amp. Will replace 31 and 37 amp alternators. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 and 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K, D5NN10300D (Item #: 111069, Ref: D5NN10300E) $160.00

Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Ford New Holland 8400, 8530, 8600, 8630, 8700, 9200, 9600, 9700, 9710, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 230A, 2310, 233, 234, 2600, 2610, 2910, 335, 3600, 3610, 3910, 4610, 530A, 5600, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8730, 8830, 9000. Replaces D2NN19N581B, D5NN18527AA, D5NN18527AA, V103596, V18380, V35513. (Item #: 108656, Ref: 72162089) $84.00

Blower Wheel - Blower wheel, counterclockwise - 4-1/4 inch diameter wheel, 3/8 inch shaft. Offset - 2 1/4 inches and 3 1/2 inches. Used on Ford models: 6610, 6810, 7410, 7610, 7700, 7710, 7810, 7910, 8700, 9700, TW10, TW20, TW30, 550, 555, 555A, 555B Replaces D5NN18459A. (Item #: 163264, Ref: 539018R2) $52.00

No
Picture
Hold-down, Battery Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000 (Series), 2100, 2110, 2120, 2150, 2300, 2310, 2600 (& N, R, V), 3000 (Series), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600 (& N, NO, R, V), 3900, 4000 (Series), 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4500, 4600 (& NO, O), 4600SU, 5000 (Series), 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600 (& C, O), 6610 (& O), 6700, 6710, 6810, 7000 (Series), 7100, 7200, 7600 (& C), 7610 (& O), 7700, 7710, 7810 (& O), 7910, 8000 (Series), 8210, 8530, 8630, 8700, 8730, 8830, 9000 (Series), 9700, Compatible with Ford Construction & industrial models A62, A64, A66, 231, 233, 250C, 260C, 333, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 455, 455C, 455D, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, Replaces Ford OEM number D6NN10716C, 83925344, Fits Ford Construction & industrial models A625 (4 cyl, 1/74-12/84, Europe), For 128Ah 4DLT Diesel Battery, (Item #: 176620) $93.00

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $12.30

Oil Pressure Sending Unit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2600, 2610, 3000, 3230, 3310, 3400, 3500, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4830, 5000, 5600, 5640, 5700, 6000, 6600, 6610, 6640, 6700, 7000, 7600, 7610, 7700, 7740, 7810, 7840, 7910, 8000, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340A, 340B, 345C, 345D, 445, 445A, 445D, 455D, 515, 531, 532, 535, 540, 540A, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 655, 655A, 655C, 655D, 675D, 675E, 775, 3500, 4500 Replaces Ford OEM number D8NN9278BB, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278F, F0NN9278AA, F1NN9278AA, C8NF9278B, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TS90, TS100, TS110, Replaces New Holland OEM number 82028130, 81873524, (Item #: 121174) $7.60

Starter - With single contact solenoid, 12 volt, 10 tooth, clockwise rotation. For tractor models (8530 1990-93 with 6-401 dsl), (8600 1972-76 with 6-401 dsl), (8700 1977-79 with 6-401 dsl), (8730 1990-93 with 6-401 dsl), (8830 1990-93 with 6-401 dsl), (9000 1970-72 with 6-401 dsl), (9030 1990-98 4-268 dsl), (9600 1972-1976 with 6-401 dsl), (9700 1977-79 with 6-401 dsl), (420 1975-78 with 3-175 dsl), (455 1987-88 with 3 cylinder dsl), (455C 1989-92 with 3-201 dsl), (455D 1992-97 with 3-201 dsl), (555 1978-84 with 3 cylinder dsl), (555A 1984-85 with 3 cylinder dsl), (555B 1985-88 with 3 cylinder dsl), (555C 1989-91 with 4-256 dsl), (650 1975-77 with 4-256 dsl), (655A 1985-88 with 4-256 dsl), (655C 1989-91 with 4-256 dsl), (750 1975-79 with 4 cylinder dsl), (755 1979-84 with 4 cylinder dsl), (755A 1984-86 with 4 cylinder dsl), (5500 1967-73 dsl), (6500, 7500 1973-76), (A62 1974-1984 with 4-256 dsl), (A64, A66 1974-1984 with 6-401). Replaces 26395, 26211, 26338A, 26339A. (Item #: 100300, Ref: SLU0002) $210.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A~~Mounting Type: Flange~~ Rotation: Clockwise~~ Starter Type: Offset Gear Reduction~~ Teeth: 10~~ Voltage: 12~~For Aftermarket Lucas Style Direct Drive use 100300 (Item #: 181969, Ref: 80855520) $210.17

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $47.00

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8530, 8630, 8700, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Item #: 119934, Ref: E4NN11350AA) $29.80

Engine Bearings

Camshaft Bearing - Single Camshaft Bearing fits the following gas and diesel tractors 1965 and up: 2000, 3000, 2600, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 7610, 7710, 8000, 8200, 8600, 8700, TW10, 9000, 9200, 9600, 9700. (Item #: 106297, Ref: C5NE6261B) $5.70

No
Picture
Connecting Rod Bearing Set, Standard - For Ford tractor models 2310, 2610, 2810, 2910, 3230, 3610, 3910, 3930, 4110, 4630, 7910, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM number 87791049, 4 Cylinder Engine, (Item #: 174601) $44.00

Flywheel With Ring Gear - This Flywheel with Ring Gear is used with 13 inch clutches. It has 128 teeth. Used on engines: BSD332, BSD333, BSD444, BSD444T Replaces F1NN6375AA, 81871636 (Item #: 159169) $700.00

No
Picture
IPTO Clutch Kit - For Ford tractor models 8000 (10/69-later), 8200 (10/69-later), 8400, 8600, 8700, 9000, 9200, 9600, 9700, Includes: (4) Friction Discs, (7) Separator Plates, (1) Piston Ring, (1) Piston Seal, (3) Sealing Rings, (Item #: 176976) $200.00

Main Bearings - .020" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790359, 87790492, Sold in complete set, Bearing Size: .020" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106430, (Item #: 106429) $68.00

Main Bearings - .020" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction & industrial models A62, A66, Compatible with Ford Engine(s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790359, 87790492, Sold in complete set, Bearing Size: .020" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106430, (Item #: 106429) $68.00

Main Bearings - .030" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790360, 87790493, Sold in complete set, Bearing Size: .030" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106429, (Item #: 106430) $105.00

Main Bearings - .030" Oversize - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction & industrial models A62, A66, Compatible with Ford Engine(s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790360, 87790493, Sold in complete set, Bearing Size: .030" Oversize, Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106429, (Item #: 106430) $105.00

Main Bearings - .040" Oversize - Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2120 (1/65-12/74), 2300 (1/65-12/74), 2310 (1/65-12/74), 2310 (3/82-12/83), 2600 (1/75-12/81), 2600 (N, R, 1/75-12/81), 2600 (V, 10/75-9/96), 2610 (1/81-4/83), 2610 (V, 1/81-2/90), 2810 (1/84-2/90), 2910 (5/83-2/90), 3000 (1/65-12/74), 3055 (1/65-12/74), 3100 (1/65-12/74), 3120 (1/65-12/74), 3190 (1/65-12/74), 3230 (3/90-9/93), 3300 (1/65-12/74), 3310 (1/65-12/74), 3330 (1/65-12/74), 3400 (1/65-9/75), 3430 (3/90-1/98), 3500 (1/65-12/74), 3550 (1/65-12/74), 3600 (1/75-12/81), 3600 (N, NO, V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610 (V, 1/81-4/83), 3610 (8/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (5/83-2/90), 3910 (H, N, 1/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 3930 (3/90-7/99), 3930 (H, 3/90-8/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4110 (1/81-2/90), 4110 (V, 1/81-2/90), 4110 (NO, O, 1/81-2/90), 4110 (N, 12/81-2/90), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4140 (1/65-12/74), 4190 (1/65-12/74), 4200 (1/65-12/74), 4330 (1/65-12/74), 4340 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 4500 (1/65-12/74), 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-7/81), 4610 (1/81-2/90), 4610 (V, 1/81-2/90), 4610 (NO, O, 1/81-2/90), 4610 (N, 1/81-2/90), 4610SU (8/81-2/90), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-later), 4830 (7/90-5/94), 4830 (N, O, 7/90-5/94), 5000 (1/65-1/75), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), 5100 (1/65-12/74), 5110 (5/84-10/91), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (Mexico, 5/85-12/93), 6410 (UK, 1/81-12/91), 6500 (3/73-10/75), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 6810 (4/89-10/91), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7410 (4/89-10/91), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7610 (1/81-10/91), 7610 (O, 10/81-12/91), 7700 (1/75-12/80), 7710 (1/81-10/91), 7810 (2/88-10/91), 7810 (O, 2/88-10/91), 7910 (1/82-10/91), 8000 (1/68-12/98), 8200 (1/68-12/98), 8210 (1/82-10/91), 8400 (1/71-9/72), 8530 (3/90-12/93), 8600 (10/72-7/76), 8630 (3/90-12/93), 8700 (8/76-12/78), 8730 (3/90-12/93), 8830 (3/90-12/93), 9000 (1/69-12/78), 9200 (1/69-9/72), 9600 (10/72-7/76), 9700 (8/76-12/78), Compatible with Ford Construction & industrial models A62 (1/74-12/83), A62 (5, Europe, 1/74-12/84), A64 (1/74-12/83), A66 (1/74-12/83), 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 250C (9/89-12/94), 260C (9/89-12/94), 333 (1/75-12/81), 334 (1/81-4/83), 335 (Highway, 1/83-2/84), 335 (10/75-9/78), 340 (3/79-9/81), 340A (10/81-5/85), 340B (6/85-11/88), 345C (12/88-8/92), 345D (9/92-10/00), 420 (10/75-9/78), 445 (1/78-5/85), 445A (6/85-11/88), 445C (12/88-8/92), 445D, 450 (1/87-11/88), 455 (7/87-11/88), 455C (12/88-8/93), 455D (9/92-9/96), 515 (10/75-9/78), 530A (1/81-4/83), 531 (1/75-12/81), 532 (10/75-9/78), 535 (10/75-9/78), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (1/84-11/88), 545C (12/88-8/92), 545D (9/92-12/00), 550 (1/75-9/78), 555 (10/78-10/88), 555A (1/84-5/85), 555B (6/85-10/88), 555C (11/88-8/93), 555D (1/70-12/73), 555D (9/93-7/96), 575D (9/93-7/96), 650 (11/75-12/77), 655 (7/85-10/88), 655A (6/85-10/88), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), 750 (11/75-12/77), 755 (1/78-12/83), 755A (1/84-12/86), 755B (1/87-1/93), Compatible with Ford Engine(s) BSD332 (9/81-later), BSD333 (H, Diesel, 1/81-later), BSD333 (1/81-later), BSD442 (1/81-later), BSD444 (HT, 1/87-later), BSD444 (H, Diesel, 12/86-later), BSD444 (1/81-later), BSD4 (Item #: 166956) $118.00

No
Picture
Main Bearing Set, .010 - .010 inch bearing. Replaces 6-CFPN6333D and 1-EBPN6337D. For 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 105655, Ref: MBK636-010) $78.00

Main Bearings - Standard - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, Compatible with Ford Engine (s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790355, 87790488, 87790356, Sold in complete set, Bearing Size: Standard, Full groove upper with slot and small oil hole, For .010" main bearing use Item #: 106430, (Item #: 106428) $133.00

Main Bearings - Standard - Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction & industrial models A62, A66, Compatible with Ford Engine(s) 401 (diesel), 401T (diesel), Replaces Ford OEM number 87790355, 87790488, 87790356, Sold in complete set, Bearing Size: Standard, Full groove upper with slot and small oil hole, For .010" main bearing use Item #: 106430, (Item #: 106428) $133.00

No
Picture
PTO Drive Clutch Piston - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600 (& C, O), 6610 (& O, S), 6640 (& O), 6700, 6710, 6810 (& S), 7000, 7100, 7200, 7410, 7600 (& C), 7610 (& O, S), 7700, 7710, 7740 (& O), 7810 (& O, S), 7840 (& O), 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670 (& A), 8700, 8730, 8770 (& A), 8830, 8870 (& A), 8970 (& A), 9000, 9030 (& E, V), 9200, 9600, 9700, Compatible with Ford Construction & industrial models 8400 Replaces Ford OEM number F1NNN786AA, D3NNN786A, C5NNN786C, C9NNN786A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, TV6070, 7010, 8010, (Item #: 176508) $22.90

Rod Bearing Pair 010 - .010 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106375, Ref: DGPN6211C) $10.00

No
Picture
Rod Bearing Pair 020 - .020 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106376, Ref: DGPN6211D) $11.40

No
Picture
Rod Bearing Pair 030 - .030 inch Undersize Bearing For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. NOTE: Please advise if 4 or 6 cylinder engine in the comment section. (Item #: 106377, Ref: DGPN6211E) $11.30

Rod Bearing Pair STD - Standard Bearing. For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 106374, Ref: DGPN6211A) $10.00

$Ford 9700 Rod Bearing Std w\Oil Hole & Grove$
Rod Bearing Std w/Oil Hole & Grove - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5110, 5610, 5900, 6410, 6500, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 555C, 555D, 575D, 650, 655C, 655D, 675D, 750, 755, 755A, 755B, 7500, Replaces Ford OEM number 87790329, (Item #: 166420) $14.30

Engine Gaskets

Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Item #: 123602, Ref: C7NN6N008B) $6.70

Conversion Gasket Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000 (1972-1977), 8210, 8530, 8600 (1972-1977), 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, Compatible with Ford Engine (s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 82845214, 83933429, 87554503, CS515206, ECPN6A008AA, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106350) $91.00

Conversion Gasket Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000 (1972-1977), 8210, 8530, 8600 (1972-1977), 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction & industrial models A64, A66, Compatible with Ford Engine(s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 82845214, 83933429, 87554503, CS515206, ECPN6A008AA, Includes crank seals, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, (Item #: 106350) $91.00

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $9.60

Crankshaft Seal, Rear - This Rear Crankshaft Seal is for 3, 4 and 6 Cylinder Engines (some gas and some diesel- not all) in models 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces D5NN6701A, D4NN6701A, C5NE6701A, C5NE6701C2, E5NN6701AA, E5NN6701BA, F0NN6701AA, 3955247, D8NN6701BA, 87802757, 83934345, 83934611, 83955247, 81869937, 83905794, 3952004, 87357537, 83904709, E2NN6010AC, E2NN6010BD, E2NN6701BA, E1NN6010KE, E1NN6010ME, 83952004, E4HN6701AA, E3NN6701BA, E2NN6010CD, E1NN6010GD, E1NN6010FE, 83943999, 83916918, 87800322, 83999513, 81813207 (Item #: 106354, Ref: E5NN6701BA) $12.70

No
Picture
Exhaust Elbow Gasket - For Ford tractor models TW20, TW30, 6600, 7000, 7100, 7200, 7600, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 750, 755, 755A, 755B, 7500, 8400, Replaces Ford OEM number C9NN5B209A, Replaces manufacturer number VPE3952, (Item #: 176431) $8.10

No
Picture
Gasket Set, Overhaul with Seals - For Ford tractor models TW5 (1986-earlier), TW10 (1979-82), TW20 (1979-82), TW30 (1979-82), 8000 (1/1/68-7/31/76, with 401 Diesel engine), 8200 (10/72-7/76), 8600 (10/72-7/76), 8700 (8/76-12/78), 9000 (6/72-7/76), 9200 (6/72-7/76), 9600 (6/72-7/76), 9700 (8/76-12/78), Replaces Ford OEM number OGS401-12, OGS401-916, For use w/ 1/2" head bolts & 9/16" head bolts, (Item #: 173458) $239.00

Head Gasket - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Replaces Ford OEM number E9NN6051AB, E9NN6051AA, D8NN6051CA, E0NN6051CA, E0NN6051CC, E0NN6051CB, Replaces OEM number 83957685, 83956450, 83910844, 83928579, 83982125, 82855144, 83994135, 6 Cylinder, .738" dowel holes, 9/16" head bolts, (Item #: 169733) $79.00

No
Picture
Head Gasket Set - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7910, 8210, 8630, 8700, 8730, 8830, 9700, Compatible with Ford Construction & industrial models A64, A66, Compatible with Ford Engine(s) 401, Additional Handling & Oversize Fees Apply To This Item, (Item #: 169630) $133.00

Oil Pan Gasket - Gasket, Oil Pan. For tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces 87840326, 87800945, E9NN6710DA, E9NN6710DB. (Item #: 106340, Ref: 87840326) $22.70

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.30

Valve Cover Gasket - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8360, 8400, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8830, 8870, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models A64, A66, 8400, Compatible with Ford Engine(s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 83912957, D8NN6584AA, 83976376, 81817050, Cork gasket, (Item #: 161141) $14.50

Engine Rebuild Kits

No
Picture
Basic In-Frame Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 189582, Ref: BIFF4050D) $679.00

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 130796, Ref: BEKF4050D-LCB) $888.00

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .020 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131065, Ref: BEKF4052D-LCB) $685.30

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .030 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131066, Ref: BEKF4053D-LCB) $888.00

No
Picture
Basic Overhaul Kit, 401 Turbo Diesel - 401 CID 6 cylinder turbocharged diesel 4.4 inch standard bore. Basic engine kit less rod and main bearings with .040 inch pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 9700 (8/1976-1978), TW20 (1979-1982), TW30 (1979-1982). (Item #: 131076, Ref: BEKF4054D-LCB) $597.00

No
Picture
Engine Rebuild Kit - Less Bearings - .040" Oversize Pistons, BSD666T, 401T - For Ford tractor models TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 8630 (3/90-8/90), 8730 (3/90-8/90), 8830 (3/90-8/90), 9700 (8/76-12/78), Compatible with Ford Construction & industrial models A66 (1/79-12/83), Compatible with Ford Engine(s) BSD666T, 401T, Standard Bore: 4.4007", Stroke: 4.400", Models 1/79-8/90, 1.625" piston pin, Crankshaft driven oil pump, Dish bowl, Keystone top ring, Ni-resist ring insert, Early rod, Kit includes: .040" Oversize Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106430, Additional Handling & Oversize Fees Apply To This Item, (Item #: 131067) $685.30

Piston and Rings - .040" Oversize - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction and industrial models A66, Compatible with Ford Engine (s) BSD666T, 401T, Replaces Ford OEM number D9NN6108F, Standard Bore: 4.4007", Includes: Piston, Pin, Rings and Retainers, Sold Per Piston, (Item #: 105653) $93.85

Piston & Rings - .020" - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction & industrial models A66, Compatible with Ford Engine(s) 401, Replaces Ford OEM number D9NN6108F-20, Replaces New Holland OEM number D9NN6108F-20, (Item #: 167054) $69.98

Piston & Rings - .040" Oversize - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction & industrial models A66, Compatible with Ford Engine(s) BSD666T, 401T, Replaces Ford OEM number D9NN6108F, Standard Bore: 4.4007", Includes: Piston, Pin, Rings and Retainers, Sold Per Piston, (Item #: 105653) $93.85

Engine Parts

$Ford 9700 Camshaft Bolt - 7\16 inch-14 x 2.937 inch - Grade 5$
Camshaft Bolt - 7/16"-14 x 2.937" - Grade 5 - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models A64, A66, Compatible with Ford Engine(s) BSD666, BSD666T, 401, 401T, Replaces Ford OEM number 12934, (Item #: 160908) $2.90

Camshaft Plug - Used on Ford engines: 158, 175, 192, 201, 233, 256, 268, 401 this camshaft plug replaces part numbers C5NND851B, 83994133, C5NND851A, 1816594 (Item #: 166919, Ref: C5NND851B) $51.00

Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number C0NN7B442A, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 81805123, (Item #: 155502) $21.40

Clutch Disc - For Ford tractor models 5000, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, 8000, 8200, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 8400, Replaces Ford OEM number D2NN7R000A, C9NN7R000A, 6.820" Major / 6.640" Minor Inner Diameter, 9.005" Outer Diameter, 0.082" Width, 80 Teeth, (Item #: 155517) $79.00

Clutch Disc - For Ford tractor models TW10, TW20, TW30, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number E0NN7Z031AA, , Compatible with New Holland tractor models TS80, TS90, TS100, TS110, TS120, 7010, 8010, Replaces New Holland OEM number 83925696, (Item #: 155540) $10.80

Connecting Rod - This Connecting Rod replaces rods with casting numbers C9NN6205C, E1NN6205EA. Used on Ford / New Holland: TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700. Fits Ford Construction and Industrials A62, A66, 575, 750, 755. 1.625 Inch piston pin. Replaces original part numbers E1NN6205, C9NN6205C, E1NN6205EA, 87801220. (Item #: 128699, Ref: C9NN6205C) $90.00

Connecting Rod - Used on Turbo-Charged Engines with 1.625 Inch Piston Pins, this connecting rod replaces Ford, New Holland part numbers 81819490, 81864273, 81875652, 83947560, 83955929, 83959784, 83973859, 87770983, C9NN6200C, E4HN6200AC, E4NN6200BA, E4NN6200BB, E8NN6200AA, E9NN6200DA, F2NN6200EA. It is used on Turbo charged engines, 1969-1988. 7000, 7100, 7200, 7600, 7700, 7410, 7610, 7710, TW15, TW20, TW25, TW35, 9000, 9600, 9700, TW30, 8630, 8730, 8830, 9200, 276V, 9030E, 9030V, 276VII, 750, 755, 555C, 655C, A62, A66, 555D, 575D, 655D, 675D, 7500, 755A, 755B. Engines BSD442, BSD666T, BSD666TI, BSD444HT, and BSD444T (Item #: 128699, Ref: F2NN6200EA) $90.00

Connecting Rod Bolt - These Connecting Rod Bolts are for gas and diesel Models: 1965 and later: 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 7/16 diameter. Priced each. Uses 385279S2 nut, not included. (Item #: 114721, Ref: E4TN6214AA) $3.70

Connecting Rod Nut - Connecting Rod Nut, for gas or diesel tractors: 2000, 3000, 4000, 5000, 7000, 8000, 9000; 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700; 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710; TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA (Item #: 109429, Ref: 385279S2) $1.10

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.40

No
Picture
Exhaust Valve - .003" Oversize Stem - For Ford tractor models TW5, TW10, TW20, TW30, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7700, 7710, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Engine(s) 256, 256T, 268, 268T, 401, 401T, Replaces Ford OEM number D8NN6505BA, Replaces manufacturer number VPA1571, Size: .003" Oversized Stem, (Item #: 176472) $21.30

No
Picture
Head Bolt Kit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 7810, 7840, 7910, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9700, Replaces Ford OEM number 87802206, 87802207, 9/16" Bolts, (Item #: 166230) $160.00

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Item #: 160935, Ref: E6NN8A614AB) $130.00

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $3.37

Power Cylinder End - Cylinder End, for Power Steering Cylinder, Left End. 3 11/16 inches from center of ball joint to end, 7/8 inch-18 female thread, For tractor models 5700, 6700, 6710, 7700, 7710, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 83904282, 83934991, 83959499, D5NN3B539C, D8NN3B539AA, D8NN3B539AB (Item #: 104656, Ref: D8NN3B539AB) $52.00

Ring Gear, Flywheel - This ring gear measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For gas and diesel models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA) $42.00

No
Picture
Rocker Arm Shaft Support - For Ford tractor models TW10, TW20, TW30, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 5500, 5550, 6500, 7500, 8400, Replaces Ford OEM number 83952459, C7NN6531A, (Item #: 176429) $15.70

Tappet, Diesel Engines - Tappet, 2.06 inches long, .990 inch diameter, DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81818724, 83946434, C5NE6500C2. (Item #: 112190, Ref: C5NE6500C2) $7.90

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5500, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7500, 7600, 7610, 7700, 7710, 7810, 7840, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $79.00

No
Picture
Valve, Exhaust - Standard Exhaust Valve. For tractor models 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 166359, Ref: D8NN6505AA) $13.98

No
Picture
Valve, Intake - Standard Intake Valve for tractor models 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 166345, Ref: D8NN6507AB) $14.40

Valve Train Set - For Ford tractor model 9700, Includes: intake and exhaust valves, springs, keepers, (Item #: 108002) $254.00

Valve Train Set - For Ford tractor model 9700, Includes: intake & exhaust valves, springs, keepers, (Item #: 108002) $254.00

Valve Train Set - For Ford tractor models TW20 (1979-1982), TW30 (1979-1982), 9000 (6/1972-7/1976), 9200 (6/1972-7/1976), 9600 (6/1972-7/1976), 9700 (8/1976-1978), Replaces Ford OEM number D0NN6507J, 107159A, 41339D, 70209103, 81817098, 81824116, 81825866, 81842754, 81865609, 81876796, 83909917, 83912598, 83946444, 87295255, 87295256, 87800340, 87802262, 887800386, C1AE6518A, C5NE6513A, C7NN6513A, C9NN6505E, D0NN6505A, D3NN6507E, D6NN6505A, D8NN6507AA, D8NN6507AB, F2NN6518AA, T20077, VPA1560, VPA1570, VPA2010, VPA2302, Guides Not Included, (Item #: 114665) $192.00

Engine Pistons and Sleeves

No
Picture
Piston Pin Bushing - Pin Bushing. For 7000, 7600, 7610, 7700, 7710, 9000, 9200, 9600, 9700, TW20, TW30. (Item #: 163922, Ref: C9NN6207C) $10.10

Piston Sleeve - (FORD) Sleeve- Cylinder - Finished - Sleeve only. 4.4 inch bore diesel engine. Replacement for re-bore kits listed. Finished bore and honed. (Item #: 160021, Ref: RBS514) $39.00

Piston Sleeve - Engines 401 CID Diesel and Turbo Diesel, 192 CID Gas, 201 Gas and Diesel, 256 CID Gas and Diesel, 256 Turbo Diesel, 233 Diesel, 268 Non Turbo and Turbo Diesel. Semi-Finished 4.4 inch bore used when boring Non Sleeved Engine. For tractor models 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 160021, Ref: SD753) $39.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished straight (non-flanged) sleeve for 4.4 inch bore engines. It is used when boring non sleeved engines. Length 8.21 inches, Inside Diameter 4.4 inches and Outside Diameter 4.6 inches. Replaces 81823241, 83912946, C9NN6055A, D0NN6055B, D7NN6055A (Item #: 108763, Ref: D7NN6055A) $66.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished flanged sleeve for 4.4 inch bore engines. Inside diameter of 4.4 inches, outside diameter 4.50 inches, Flange lip .100 inches, diameter at flange 4.738 inches and overall length is 8.21 inches. This sleeve is for boring non-sleeved engines. Block must be counterbored for sleeve flange. Replaces 83912946, 81823241, 81829308, C9NN6055A, D7NN6055A (Item #: 160021, Ref: D7NN6055AFL) $39.00

No
Picture
Piston With Rings 020 - .020 inch Oversize Piston. For 9700, TW20, TW30. (Item #: 111749, Ref: D7NN6108C) $196.00

No
Picture
Piston With Rings, .030 - Oversize Piston. For tractor models 9700, TW20, TW30. (Item #: 173289, Ref: D7NN6108D) $182.00

No
Picture
Piston With Rings 040 - .040 inch Oversize Piston. For 9700, TW20, TW30. D9NN6108KA, D7NN6108E, 83919739 (Item #: 172365, Ref: D7NN6108E) $159.02

No
Picture
Piston With Rings STD - Standard Bore Piston. For 9700, TW20, TW30. (Item #: 191339, Ref: D7NN6108A) $133.98

Engine Rings

No
Picture
Piston - .040" - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5600, 5700, 6600, 6700, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 333, 334, 335, 531, 3500, 3550, 4500, 8400, Replaces Ford OEM number D4NN6108E, C7NN6110AV, C7NN6110G, C5NN6110T, C7NN6108BN, C5NN6108T, D5NN6110AM, D5NN6110BK, D4NN6110L, D2NN6108U, D2NN6110AE, 81846018, 83910841, 31P31, D6NN6108F, D6NN6110R, D6NN6110X, D6NN6108K, D4NN6108AE, Size: .040", (Item #: 172308) $194.00

Piston and Rings, .030" - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 8630, 8730, 8830, 9700, Compatible with Ford Construction & industrial models A66, Compatible with Ford Engine(s) 401, Replaces Ford OEM number D9NN6108F-30, .030", (Item #: 167127) $106.98

No
Picture
Ring Set - .020 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120797, Ref: DFPN6149B) $42.00

No
Picture
Ring Set - .030 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 108032, Ref: DFPN6149C) $43.00

No
Picture
Ring Set - .040 inch Oversize Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120798, Ref: DFPN6149D) $25.60

No
Picture
Ring Set - Standard Ring for 1 piston. For tractor models 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 120796, Ref: DFPN6149E) $41.00

Exhaust System

Manifold - Front section. For tractor models 7910, 8210, 8700, 9700, TW20, TW10, TW30. Gaskets NOT included. (Item #: 101532, Ref: D8NN9430AB) $133.00

Manifold - Rear section. For tractor models 7910, 8210, 8700, 9700, TW10, TW20, TW30. Gaskets NOT included. (Item #: 101533, Ref: D5NN9431A) $72.41

Manifold - Front. For tractor models 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces D8NN9430AB. (Item #: 101532, Ref: R0291) $133.00

Manifold - Rear. For tractor models 7910, 8210, 8630, 8700, 9700, TW10, TW15, TW20, TW25, TW30, TW35. Replaces OEM# D5NN9431A. (Item #: 101533, Ref: R0292) $72.41

Muffler - Vertical Exhaust inlet 3 1/2 inch inside diameter, outlet 3 1/2 inch outside diameter, overall length 44 1/2 inch. For 9600, 9700, TW10, TW20, TW30 with 6 cylinder diesel engine. OEM part numbers use MC312 clamp, use R1806 rain cap. Replaces D6NN5230AJ (Item #: 100596, Ref: R1638) $259.00

Fuel System / Air Intake

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Item #: 121925, Ref: T23262) $7.49

Banjo Bolt - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 420, 445, 445A, 450, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B, Replaces Ford OEM number 21470ES80, D1NN9R523A, D1NNR523A, 81825730, Replaces Case IH OEM number 81825730, D1NN9R523A, Replaces New Holland OEM number 377504S100, (Item #: 181440) $5.80

Breather Cap 3" - For Ford tractor models TW5, TW10, TW15, TW20, TW25, 3610, 6610, 7700, 7710, 8700, 9700, Replaces Ford OEM number C7NN9B646A, C7NN9B646A12M, F2NN9B646AA12, Breather Cap For 3" Pipe, For Tractors With 3" Intake Pipe, (Item #: 112381) $25.00

Fuel Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2310, 2600, 2610, 2810, 2910, 3000, 3415, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9700 Replaces Ford OEM number C5NN9030A, E7NN9030AA, , Compatible with New Holland tractor models TC30, Replaces OEM number 81811847, 83900753, 83904042, 83929889, 83947669, 83947845, 83961128, SBA360300080, D5NN9030A, D8NN9030BA, E1NN9030AA, E3NN9030AA, E6NN9030BA, For Diesel fuel only, (Item #: 153470) $7.98

Fuel Cap, Diesel - Cap. For tractor models 2000, 2600, 2810, 2910, 3000, 3600, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610SU, 5000, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E7NN9030AA. (Item #: 185782, Ref: D5NN9030A) $12.93

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5530, 5600, 5610, 5640, 5700, 5900, 6000, 6000 Commander, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8400, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Item #: 184806, Ref: C5NN9030D) $10.00

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $15.00

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Item #: 156291, Ref: C5NE9F596A) $2.30

Fuel Lift Pump Repair Kit - Used to repair original equipment fuel lift pumps on Ford / New Holland models: 2150, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5610, 5900, 6410, 650, 6500, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Major, Super Major, TW10, TW15, TW20, TW25, TW30, TW35, TW5. This repair kit replaces OEM numbers 81458909, 500093, 693F9K340AA, B1016 (Item #: 172699, Ref: 693F9K340AA) $21.90

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. (Item #: 172699, Ref: S40569) $21.90

Fuel Shut Off Cable - This new Fuel Shut Off Cable fits 550 LOADER, 555 LOADER, 555A LOADER, 555B LOADER, 650, 6500, 655, 655A, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. It is 63" long. Replaces OEM part numbers E5NN9C331DA, E5NN9C331DB. (Item #: 164879, Ref: E5NN9C331DA) $15.10

Fuel Transfer Pump - Lift Pump, 2-bolt. Mounts to Injection Pump. For Super Major (8-1961/1964), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Transfer Pump. Used on 3, 4 and 6 Cylinder Diesel Engines. Replaces: 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. Uses S40569 Repair Kit. (Item #: 106200, Ref: D8NN9350AB) $25.00

No
Picture
Injector - Diesel Fuel Injector. For 401-TCID, 401-TICID, 9000, 9600, 9700, A66, TW20, TW30. (Item #: 119913, Ref: D8NN9F593BA) $69.00

Precleaner Assembly - For tractor models 8630, 9030E, 9030V, 9700, TW15, TW20. Inlet opening 4.5 inch diameter, bowl is 10 inches in diameter. Nylon base with steel top cap. Uses 1109-9501 center bowl. Does not include clamp. Also replaces 86011276. (Item #: 115855, Ref: 83904364) $46.00

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $9.80

Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Item #: 167626, Ref: C5NN9740A) $8.40

Gauges

No
Picture
Tachometer Drive Cover - For Ford tractor models TW5, TW10, 2000, 2100 (3 Cylinder, 3/65-12/74), 2110 (3 Cylinder, 1/65-12/74), 2120 (3 Cylinder, 1/65-12/74), 2300 (3 Cylinder, 1/65-12/74), 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100 (3 Cylinder, 1/65-12/74), 3120 (3 Cylinder, 1/65-12/74), 3190 (3 Cylinder, 1/65-12/74), 3230, 3300 (3 Cylinder, 1/65-12/74), 3310 (3 Cylinder, 1/65-12/74), 3330 (3 Cylinder, 1/65-12/74), 3430, 3600, 3610, 3900, 3910, 4100, 4110, 4130, 4190 (3 Cylinder, 1/65-12/74), 4200 (3 Cylinder, 1/65-12/74), 4330, 4340 (3 Cylinder, 1/65-12/74), 4410 (3 Cylinder, 1/65-12/74), 4600, 4610, 4630, 5000, 5110, 5600, 5610, 5700, 5900 (July 31, 1987-earlier), 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7610, 7700 (4 Cylinder, 1/76-12/80), 7710, 7810, 7910, 8000 (01/01/68 - 07/30/76), 8200 (01/01/68 - 07/30/76), 8210, 8530, 8600 (01/01/68 - 07/30/76), 8630 (6 Cylinder, 3/90-12/93), 8700, 8730 (6 Cylinder, 3/90-12/93), 8830 (6 Cylinder, 3/90-12/93), 9000 (6 Cylinder, 3/90-12/93), 9200 (6 Cylinder, 3/90-12/93), 9600 (6 Cylinder, 3/90-12/93), 9700 (6 Cylinder, 3/90-12/93), Compatible with Ford Construction & industrial models 230A (3 Cylinder, 3/65-12/74), 231 (3 Cylinder, 1/75-12/81), 233 (3 Cylinder, 1/75-12/81), 234 (3 Cylinder, 1/75-4/83), 333 (3 Cylinder, 1/75-12/81), 334 (3 Cylinder, 1/81-4/83), 335 (3 Cylinder, 1/83-2/84), 531 (3 Cylinder, 1/75-12/81), 550, 555, 555A, 555B, 655, 655A, 3500 (3 Cylinder, 1/65-1/74), 3550 (3 Cylinder, 1/65-1/74), 4500 (3 Cylinder, 1/65-1/74), 8400 (6 Cylinder, 1/71-9/72), Replaces Ford OEM number E9NN6L692AA, 81864643, (Item #: 168388) $3.80

Tachometer Drive Spacer - For Ford tractor models TW5, TW10, 2000, 2100 (3 Cylinder, 3/65-12/74), 2110 (3 Cylinder, 1/65-12/74), 2120 (3 Cylinder, 1/65-12/74), 2300 (3 Cylinder, 1/65-12/74), 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100 (3 Cylinder, 1/65-12/74), 3120 (3 Cylinder, 1/65-12/74), 3190 (3 Cylinder, 1/65-12/74), 3230, 3300 (3 Cylinder, 1/65-12/74), 3310 (3 Cylinder, 1/65-12/74), 3330 (3 Cylinder, 1/65-12/74), 3430, 3600, 3610, 3900, 3910, 4100, 4110, 4130, 4190 (3 Cylinder, 1/65-12/74), 4200 (3 Cylinder, 1/65-12/74), 4330, 4340 (3 Cylinder, 1/65-12/74), 4410 (3 Cylinder, 1/65-12/74), 4600, 4610, 4630, 5000, 5110, 5600, 5610, 5700, 5900 (July 31, 1987-earlier), 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7610, 7700 (4 Cylinder, 1/76-12/80), 7710, 7810, 7910, 8000 (01/01/68 - 07/30/76), 8200 (01/01/68 - 07/30/76), 8210, 8530, 8600 (01/01/68 - 07/30/76), 8630 (6 Cylinder, 3/90-12/93), 8700, 8730 (6 Cylinder, 3/90-12/93), 8830 (6 Cylinder, 3/90-12/93), 9000 (6 Cylinder, 3/90-12/93), 9200 (6 Cylinder, 3/90-12/93), 9600 (6 Cylinder, 3/90-12/93), 9700 (6 Cylinder, 3/90-12/93), Compatible with Ford Construction & industrial models 230A (3 Cylinder, 3/65-12/74), 231 (3 Cylinder, 1/75-12/81), 233 (3 Cylinder, 1/75-12/81), 234 (3 Cylinder, 1/75-4/83), 333 (3 Cylinder, 1/75-12/81), 334 (3 Cylinder, 1/81-4/83), 335 (3 Cylinder, 1/83-2/84), 531 (3 Cylinder, 1/75-12/81), 550, 555, 555A, 555B, 655, 655A, 3500 (3 Cylinder, 1/65-1/74), 3550 (3 Cylinder, 1/65-1/74), 4500 (3 Cylinder, 1/65-1/74), 8400 (6 Cylinder, 1/71-9/72), Replaces Ford OEM number D0NN6A798A, 81823865, For Tachometer Drive Cover use Item #: 168388, (Item #: 168389) $6.80

Hitch / Drawbar

Gear, Leveling Box - Leveling box gear for tractor models 5000, 7000, 8000, 8700, 9000, 9600, 9700, 5600, (5610, 6610, 6710, 6810, 7610, 7710, 5900 up to 12/82), 6600, 6700, 7600, 7700, TW10, TW20, TW30. (Item #: 185110, Ref: C7NN568B) $22.40

Pin - For Ford tractor models 5000, 5100, 5110 (4 Cylinder), 5200, 5600, 5610 (4 Cylinder), 5900 (4 Cylinder), 6600, 6610, 6700, 6710 (4 Cylinder), 6810 (4 Cylinder), 7100, 7200, 7410 (4 Cylinder), 7600, 7610 (4 Cylinder), 7700, 7710 (4 Cylinder), 7810 (6 Cylinder), 7910 (6 Cylinder), 8000 (6 Cylinder), 8200 (6 Cylinder), 8210 (6 Cylinder), 8600 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9200 (6 Cylinder), 9600 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction & industrial models 8400 (6 Cylinder), Replaces Ford OEM number C5NNN936A, 83976556, (Item #: 170276) $12.90

Telescopic Bar Hole Stabilizer, Right Hand - For Ford tractor models 600, 700, 2310, 2600, 2610, 2810, 2910, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4200, 4600, 4610, 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8100, 8200, 8210, 8600, 8700, 9200, 9600, 9700, Replaces OEM number FTS15610, Max Length: 28 -3/4", Min Length: 18 -5/16", Additional Handling & Oversize Fees Apply To This Item, (Item #: 169818) $120.00

Hydraulic System

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref: C5NNN901A) $12.90

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $19.24

Hydraulic Pump, Transmission Mounted - For tractor models 8000, 8600, 8700, 9000, 9600, 9700, all 1968-1978. Hydraulic Pump, mounts in transmission housing. 16 GPM. Replaces C7NN600D. (Item #: 104232, Ref: D5NN600C) $520.00

Hydraulic Quick Release Coupling, Male - Male Tip-Check Valve Assembly, Implement Half. 1/2 - 14 Pipe Thread 3000 psi. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30. (Item #: 119129, Ref: D5NNB964A) $19.98

Lights

Light Switch, Rotary Type - This Rotary Type Light Switch is used on many Ford / New Holland Tractors and Industrials, 1965 and later. It replaces original part numbers C5NN11654A, C5NN11654D, C7NN11654B, C7NN11654C, D5NN11654B, E7NN11654AA, 83959708, D10026500, 83959708, 81818781, 81818408, 83905863. (Item #: 121197, Ref: E7NN11654AA) $11.80

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $27.50

Miscellaneous

No
Picture
Cab Foam Floor Mat, Black - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 6710, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, Color: Black, Kits are computer cut to assure accuracy, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112836) $149.00

No
Picture
Cab Foam Floor Mat, Black - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 6710, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, Color: Black, Kits are computer cut to assure accuracy, Additional Handling & Oversize Fees Apply To This Item, (Item #: 112836) $149.00

Cab Foam Kit - 9-Piece Black. For tractor models 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Toolbox on Left Fender (Item #: 180741, Ref: R3237) $383.00

No
Picture
Cab Foam Kit - 8-Piece Blue. For tractor models 6700, 7700, 7710, 8700, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Toolbox on Left Fender (Item #: 112825, Ref: R3238) $304.00

No
Picture
Cab Foam Kit less Headliner, Blue - For Ford tractor models TW10, TW20, TW30 (all with standard tool box), 8700, 9700, Color: Blue, Kits are computer cut to assure accuracy, 5 Pieces, Includes 1 can of Spray Adhesive, For Headliner use Item #: 112727, Additional Handling and Oversize Fees Apply To This Item, (Item #: 112832) $369.00

No
Picture
Cab Foam Kit less Headliner, Blue - For Ford tractor models TW10, TW20, TW30 (all with standard tool box), 8700, 9700, Color: Blue, Kits are computer cut to assure accuracy, 5 Pieces, Includes 1 can of Spray Adhesive, For Headliner use Item #: 112727, Additional Handling & Oversize Fees Apply To This Item, (Item #: 112832) $369.00

No
Picture
Cab Headliner - 1-Piece Blue. For tractor models 6700, 8700, 9700, TW10, TW20, TW30. This part must ship Truck Freight. Additional $100.00 shipping due to weight. (Item #: 112824, Ref: R3254) $416.00

No
Picture
Drive Clutch Piston Spring Retainer Snap Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 501, 541, 600, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3600, 4000, 4000SU, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 5000, 5100, 5110, 5200, 5600, 5610, 5610S, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4400, 4500, 8400 Replaces Ford OEM number PBB77517A, , Compatible with New Holland tractor models TB100, TB110, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number PBB77517A, (Item #: 176669) $5.60

No
Picture
Floor Mat Kit - For 6700, 7700, 8700, 9700 (Item #: R3253) $119.99

No
Picture
Headliner Retainers - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2600, 3600, 4100, 4600, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8700, 9700, Compatible with Ford Construction & industrial models 233, 333, 16 Pack, (Item #: 172200) $33.00

No
Picture
Lower Cab Foam Kit - Black - For Ford tractor models TW5, TW15, TW25, TW35, 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8200, 8210, 8700, 9700, Includes Spray Adhesive, with Small Metal Toolbox, (Item #: 172205) $252.00

No
Picture
Lower Cab Foam Kit - Black - For Ford tractor models TW5, TW15, TW25, TW35, 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8200, 8210, 8700, 9700, With Large Padded Tool Box, Includes Adhesive Spray, (Item #: 172206) $274.00

No
Picture
Lower Cab Foam Kit - Blue - For Ford tractor models TW5, TW15, TW25, TW35, 6710, 7710, 7810, 7910, 8210, 9700, with Small Metal Toolbox, Includes Adhesive Spray, (Item #: 172227) $252.00

No
Picture
Weather Strip Seal Kit - Side Window - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3600, 4600, 4610, 5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 8210, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D8NN9429732BC, D8NN9429732BB, D8NN9429733BC, Replaces OEM number 83947573, D8NN9429733BB, 83947572, Sold as a pair, Right and Left Hand side windows, Weather Seal must be glued in., (Item #: 170442) $304.00

No
Picture
Weather Strip Seal - Rear Glass Molding Kit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5110, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Replaces Ford OEM number E7NN9442082AA, 83961300, D8NN9442082GC, For Sliding/American Style Rear Glass, Length: 159", Molding makes full circle, Molding must be glued in, (Item #: 170491) $253.00

Oil System

No
Picture
Dipstick, Engine Oil - For tractor models 445, 445A, 450, 455, 455C, 455D, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, (6410, 6810, 7410 prior to 12/1988), 650, 6500, 655, 655A, 655C, 655D, 655E, 6600, 6610, 6700, 6710, 675D, 675E, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 8000, 8200, 8400, 8600, 9000, 9200, 9600, 9700, TW10, TW20, TW30. (Item #: 113916, Ref: 83982499) $9.90

Driveshaft - Intermediate Shaft, Oil Pump Drive. For tractor models 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700. (Item #: 169650, Ref: C7NN6A605A) $12.40

Engine Oil Filter Conversion Kit - Converts Element/Canister style filter to Spin On type. Use filter E7NN6714BA (not included). Fits 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700. Replaces DKPN6882A, E9NN6884AA, D8NN6N818AA, 87097S95, D8NN6890BA, 83916925, 83914060, 83981595. (Item #: 115060, Ref: DKPN6882A) $101.00

Oil Dipstick - This Dipstick is 7 7/8 inches long. It is used on many Ford agriculture and industrial models, 1975 and later. Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Item #: 113916, Ref: E9NN6750BA) $9.90

Oil Filler Cap - Fits ALL 3, 4, and 6 cylinder models that are 1975 and NEWER, Including: 2600, 2310, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4600, 4610, 4630, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces: 81823214, 83907851, 87763303, 87867228, C7NN6N609B, C9NN6N609A, D5NN6N609A (Item #: 123584, Ref: 83907851) $11.00

Oil Filter - Engine Oil Filter, Cartridge Element, 2 quart. Measures 4 1/2 inches outside diameter, 11/16 inches hole diameter and 4 7/8 inches in length. For 3, 4 and 6 Cylinder Engines (1965 to 1979) on models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20. (Item #: 181771, Ref: DGPN6731A) $13.00

Oil Filter, Spin on - Used with DKPN6882A adapter. Fits models 8400, TW10, TW20, 8000, 8200, 8600, 8700, 9000, 9200, 9600 and 9700 (Item #: 115061, Ref: E7NN6714BA) $40.00

Oil Filter Spin On Type - 3.74 inches OD, 6.93 inches long and 3/4 - 16 UNF Threads, For tractor models 6410, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 8100, 9000, 9600, 9700. Replaces A780X6714CA, A780X6714DA, D2NN6714C, D5NN6714A, 81827183, 86546609, 1909101, D8NN6714LA, 505062, 75PF6714AA. (Item #: 120090, Ref: S.40539) $16.60

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Item #: 153774, Ref: D8NN9278BD) $9.32

Oil Pump - Oil pump. For tractor models 8000, 8200, 8600, 9000, 9200, 9600, 9700. (Item #: 128669, Ref: E2NN6600AC) $228.00

Oil Pump - This Oil Pump is used on Ford / New Holland models: 7910, 8210, 8700, 9700, TW10, TW5. It replaces E1NN6600BC, 83956423. (Item #: 128669, Ref: E1NN6600BC) $228.00

Oil Pump - For Ford tractor models 4610, 7810, 7910, 8000, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction & industrial models 8400, Replaces Ford OEM number 81826405, 83961087, (Item #: 176456) $266.00

$Ford 9700 Pump Gear\Shaft Assembly$
Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: TW5, TW15, TW25, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, 230A, 233, 234, 250C, 260C, 333, 334, 335, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B. Replaces E9NN6A820AA, 87800008, C7NN6A820C, D3NN6A820E, 3984954, 81845748, 73345660, 81822957, 81837148, 83984954, 81843777, 81834095, D3NN6A820F, D3NN6A820G, C7NN6A820A, D0NN6A820A, C7NN6A820B, D3NN6A820A, D3NN6A820D, 87764586, 87764587, 81859340, 81844832, 81845749, 81818742, 87763956, D3NN6A820B (Item #: 140555, Ref: E9NN6A820AA) $42.96

PTO / Driveline

$Ford 9700 Dual Power\ PTO Disc$
Dual Power/ PTO Disc - This Dual Power/PTO Disc measures 5.84 inches outside diameter, 4.500 inside diameter with 52 teeth. It replaces original part numbers C9NNP743A, C9NNP743D, D3NNP743A, 81822308, 81830023, 81830026. (Item #: 109833, Ref: C9NNP743D) $13.40

Oil Seal, PTO Input Shaft - This PTO Input Shaft Oil Seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. For models 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700. All for tractors with a 7 or 8 speed transmission. Replaces 81801990, C5NN2N258A, C5NN2N258C, C5NN799A, C5NNE2A258B. (Item #: 165141, Ref: 195501M1) $3.90

PTO Clutch Pack Sealing Ring - This PTO Clutch Pack Sealing Ring is used with D2NNN751D and E0NNN751BA Clutch Packs. 2.375 Inch Outside Diameter. Three used per tractor. Replaces 8313283, 81809513 and 313283. (Item #: 168315, Ref: 313283) $4.10

PTO Clutch Plate - This is a Steel PTO Clutch Plate. It measures 6.062 inches outside diameter, 4.448 inch inside diameter and has 60 teeth. It replaces original part numbers 81808607, D6NNC730A, PBB77573A, PBB77573AA, 1102-5506, 81565601. (Item #: 104211, Ref: PBB77573A) $5.30

PTO Drive Clutch Valve Support - For Ford tractor models 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number C7NNB787A, (Item #: 104216) $197.00

No
Picture
PTO Drive Shaft - For 8000, 8700, 9000, 9700, all 1968-8/1969. PTO Drive Shaft. 37.5" Long, 20 Splines. (Item #: 104215, Ref: C7NN7A584D) $502.00

No
Picture
PTO Drive Shaft - For tractor models 8000, 8200, 8400, 8600, 8700, 9000, (9200, 9600, 9700, all 9/1969-1978). PTO Drive Shaft 37.562" Long, 20 Splines. (Item #: 104215, Ref: C9NN7A684A) $502.00

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $15.00

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.6mm inside diameter x 95.6 outside diameter x 12.5mm wide (3.75 inches x 2.85 inches x 0.56 inches wide). Used on Ford / New Holland 3600, 4600, 5110, 532, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 6810S, 7010, 7410, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8670A, 8700, 8730, 8770, 8770A, 8830, 8870, 8870A, 8970, 8970A, 9200, 9700, TS100, TS100 Brazilian, TS110, TS110 Brazilian, TS115, TS120 Brazilian, TS80, TS90, TV140, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 81819768, 83955173, 9823545, 89823545, D9NNN710BC, D9NN710BC (Item #: 128143, Ref: 9823545) $30.00

PTO Piston O-Ring - This is the Inner PTO Piston O-Ring Seal. Replaces 373227S 83416992. (Item #: 172963, Ref: 373227S) $1.90

PTO Piston O-Ring - This is the Outer PTO Piston O-Ring Seal. It replaces C0NN7A548A, CFPN6333A/B, 81805281 (Item #: 172955, Ref: C0NN7A548A) $3.90

PTO Piston Return Spring - Replacing Ford / New Holland part numbers 81871420, 83935173, C0NN7C151A, 9823824, D7NNC732A, 81804819, this Spring is used in tractors with independent PTOs. Used on Ford / New Holland models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TS100, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 124549, Ref: D7NNC732A) $20.10

PTO Shaft - For tractor models (5110, 5610, 5900, 6410, 5410 UK, 6610, 6710, 6810, 7610, 7710, all with single speed PTO 10/1989 and later), (5640, 6650, 7740 all with single speed 11/1990 and later). PTO Shaft 540 RPM. 11.764 inches long, 28 tooth drive splines. (Item #: 111990, Ref: E8NN710AA) $350.00

PTO Thrust Washer - This PTO Thrust Washer is used on 5000, 5600, 5610, 5610S, 5640, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7610S, 7700, 7710, 7740, 8000, 8210, 8240, 8340, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9600, 9700, TS100, TS110, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces C5NNN783A, 81801955 (Item #: 178082, Ref: C5NNN783A) $5.90

Seats

No
Picture
Arm Rests - Pair - Blue Vinyl on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Item #: 178479, Ref: R1164) $211.00

No
Picture
Arm Rests - Pair - Blue Fabric on Steel For 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 with Bostrom Style Seat (Item #: 101999, Ref: R1167) $128.00

No
Picture
Seat Bottom - Blue Vinyl on Steel For 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35 (Item #: 178478, Ref: R1162) $278.00

No
Picture
Seat Bottom - Blue Fabric on Steel. For tractor models 5700, 6700, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Item #: 178472, Ref: R1165) $303.00

Sheet Metal / Body Parts

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $27.00

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction & industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $27.00

Wheel Weight, Rear - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8530, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9700 Replaces Ford OEM number D8NN1A002AA, , Compatible with New Holland tractor models 8670, 8770, 8870, 8970, Replaces New Holland OEM number 86027372, OD: 28 ", ID: 16 3/8 ", Thickness: 5 1/2 ", Weight: 432 lbs each, Hole Pattern: 3 @ 15 1/2 ", Item ships via freight carrier please call 1-800-853-2651 for a freight quote, (Item #: 128843) $669.00

Steering

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.70

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction & industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.70

Axle Spacer - For tractor models 4000, 5000, 5900, 7000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, 4600, 5600, 6600, 6700, 7600, 7700, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8210. (Item #: 182791, Ref: C5NN3N030G) $8.00

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $6.40

No
Picture
O-Ring & Plug Assembly - For Ford tractor models TW10, TW20, TW30, 5000, 5200, 5700, 6700, 7000, 7200, 7700, 8000, 8400, 8600, 8700, 9000, 9600, 9700, Replaces Ford OEM number D1NN3R684A, 036147A1, (Item #: 126955) $4.98

Power Steering - PUMP with Reservoir with barbed return fitting For 8000, 8600, 8700, 9000, 9600, 9700, TW-5, TW-10, TW-15, TW-20, TW-25. Also replaces D7NN3K514G. (Item #: 111311, Ref: E0NN3K514AB) $418.46

No
Picture
Power Steering - PUMP without Reservoir For 8000, 8600, 8700, 9000, 9600, 9700 (1968-2/1973) (Item #: 157641, Ref: R4110) $484.00

Power Steering - PUMP with Reservoir For 9700 (From 8/1976), TW-30, TW-35. OEM# D8NN3K514JD (Item #: 114296, Ref: R4111) $450.00

Power Steering Cylinder Shaft - This Power Steering Cylinder Piston and Rod and a 2.234 Outside Diameter. It is used on 5700, 6700, 7700, 7710, 7910, 8210, 8700, 9700, TW10, TW20, TW30. Use with DGPN3301B Seal Kit. Replaces original part number D5NN3N797A, D5NN3N699A (Item #: 179350, Ref: D5NN3N797A) $170.00

Power Steering End - Measures 3.75 from center of knuckle to end of threads, threads are 1 inch diameter and 16 Right Hand threads. For tractor models TW15, TW25, TW30, TW35, TW5, 5700, 6700, 6710, 7700, 7710, 8000, 8700, 9000, 9700. Also replaces D5NN3A302C, D5NN3A302D, 83906190, 83913086. (Item #: 100684, Ref: D8NN3A302AA) $47.00

Power Steering O-Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7810S, 8530, 8600, 8630, 8700, 8730, 8830, 9600, 9700, Compatible with Ford Construction & industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655C, 655D, 675, 675D, 750, 755, 755A, 755B, Replaces Ford OEM number D2NN3D587A, D7NN3D587A, (Item #: 154787) $2.50

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For tractor models (2000, 3000, 4000, 5000 1965-9/1968), (8000, 8600, 9000, 9600 1/1968-2/1973), (Industrials 3400, 3500, 4400, 4500 1965-4/1970). NOTE: This kit is for pumps that used 2 - single lip seals. If your pump uses one double lip seal, use kit 83910651. (Item #: 113930, Ref: DHPN3A674B) $9.50

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $14.60

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Spindle Bushing - This is a Lower Spindle Bushing used in multiple Ford Tractors. Measures 1.94 inches ID, 2.06 inches OD, and 1.75 inches long. Replace original part numbers C0NN3110A and 81812242. (Item #: 100243, Ref: C0NN3110A) $10.20

No
Picture
Spindle - LH - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 8700, 9700, Replaces Ford OEM number D5NN3106C, Dimension A: 16.775", Dimension B: 1.722", Dimension C: 1.934", Dimension D: 1.794", Dimension E: 1.125", Left Side, (Item #: 100650) $483.00

Spindle Nut - Fits on front spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.20

No
Picture
Spindle - RH - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 8700, 9700, Replaces Ford OEM number D5NN3105C, Dimension A: 16.775", Dimension B: 1.722", Dimension C: 1.934", Dimension D: 1.794", Dimension E: 1.125", Right Hand, (Item #: 100649) $460.00

$Ford 9700 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D9NN3105AA, Dimension A: 14.75", Dimension B: 1.999", Dimension C: 2.000", Dimension D: 1.500", Right or Left Side, (Item #: 100646) $826.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.50

Steering Arm - This Steering Arm is used on Ford/New Holland Models: 5700, 6700, 7700, 6710, 7710, 7810, 7910, 8210, 8700, 9700, TW10, TW20, TW30 Replaces original part number D5NN3131B (Item #: 104744, Ref: D5NN3131B) $270.00

Steering Arm - For Ford tractor models TW10, TW20, 5700, 6700, 6710, 7700, 7710, 8200, 8700, 9700, Replaces Ford OEM number D5NN3131C, 39 Tooth Spline, LH Steering Arm, Steering Arm - Right Hand use Item #: 104745, (Item #: 104746) $165.00

Steering Arm, RH - Our New Steering Arm is used on the right side for models with 2 wheel drive and short wheelbase. Ford / New Holland 5700, 6700, 6710, 7700, 7710, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 86533883, D5NN3130B (Item #: 104745, Ref: D5NN3130B) $223.98

Steering Control Valve Upper Seal Kit - This Steering Control Valve Upper Seal Kit is used on Ross, TRW, and Hydraguide Steering Valves (Steering Motors). Replaces 123465C1, 132554, 224712C1, 517416, 837253M91, 86585473, A47038, F1NN3N991A (Item #: 140493, Ref: HG500007) $35.00

Steering Motor - For Ford tractor models TW5, TW10, TW20, TW30, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 9000, 9700, Replaces Ford OEM number 81875266, E3NN3A244CB, Fits 6 cylinder engines, Steering control unit with "Roll Pin" type shaft, 146 cc, (Item #: 155280) $1049.01

No
Picture
Steering Wheel Cap - Black Cap only fits 17 5/8 diameter steering wheels on models: (2000, 3000, 4000, 5000, 7000 1965-1975), (2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 231, 233, 333, 335, 531, 532, 535 1975-1981), (2310, 2610, 2910, 3610, 3910, 4110, 230A, 234, 334, 335, 530A 1981-2/90), (5610, 5900, 7610 1981-1991), (8000, 9000, 8700, 9700, TW10, TW20, TW30 1973-1982), (3230, 3430, 3930, 4130, 4630 3/1990 and up), (4830, 5030 7/1990 and up), (5610S, 6610S, 7610S 1994 and up). (Item #: 152187, Ref: C7NN3655B) $6.00

Tie Rod - End, outer, notched (9), 19-5/8 inches to center of post. For tractor models 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Item #: 100686, Ref: C7NN3280D) $38.00

Tie Rod - Tie Rod is 1.187 diameter rod, left hand, straight, drilled, 8 holes, 31 inches to center of post. For 4600, 532, 5610, 5700, 6610, 6700, 6710, 7410, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 3600. Replaces 83906922, 83929292, E1NN3280AA (Item #: 100688, Ref: E1NN3280AA) $58.00

Tie Rod End - This Tie Rod End is used on Ford New Holland 5200, 7200, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700. 7.375 Inch length, 1.000 Diameter, 16 Right Hand Thread. Replaces 81820108, C7NN3289C (Item #: 104636, Ref: C7NN3289C) $37.00

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $16.60

Tie Rod End - Right Hand - For Ford tractor models TW10, TW20, TW30, 8000, 8700, 9700, Replaces Ford OEM number D8NN3289DB, Dimension A: 4.937", Dimension B: 1.000" - 16 Right Hand Thread, (Item #: 104662) $77.00

Tie Rod Short - End, right hand offset, threaded, 8-3/4 inch to center of post. For tractor models 6710, 7710, 8700, 9700, TW10, TW15, TW20, TW25, TW35, TW5. (Item #: 104689, Ref: E1NN3289AA) $38.00

Tools

No
Picture
Clutch Alignment Tool, 1.40" Pilot Diameter, 10 Spline - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5200, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number 8301153, Pilot Diameter: 1.40", 1st Spline: 1-3/4", 10 Spline, (Item #: 176770) $42.00

Wheels

Front Wheel Bearing Kit - For tractor models (5000, 7000 1972 and up with 8 x 16 wheel), 8000, 8600, 8700, 9000, 9600, 9700, (TW10, TW20, TW30 less heavy duty), (5610, 6610, 6710, 7610, 7710, 10/1989 and up heavy duty axle), 3400, 3550, 4400, 4500, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 535, 540, 540A, 540B, 545, 545A. NOTE: check bearing and cup numbers before ordering. Replaces 8L4221/312518, 25590-25520 for Inner Bearing and Cup, 312520/312548, 02474/02420 Outer Bearing and Cup, E4NN1190AA Seal. (Item #: 100657, Ref: S.67455) $56.00

Front Wheel Hub Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 3400 ('65-74), 3500, 3910, 4030, 4400, 4410, 4610, 5000 ('63-75 w/10"x16" tires), 5100, 5110, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000 ('63-75 w/10"x16" tires), 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8240, 8340, 8700, 9000, 9700, Compatible with Ford Construction and industrial models 250C, 260C (340), 340, 345, 420, 445, 450, 540, 545, 2030, 3550, Replaces Ford OEM number 249127, (Item #: 104571) $6.00

Front Wheel Hub Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 3400 ('65-74), 3500, 3910, 4030, 4400, 4410, 4610, 5000 ('63-75 w/10"x16" tires), 5100, 5110, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000 ('63-75 w/10"x16" tires), 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8240, 8340, 8700, 9000, 9700, Compatible with Ford Construction & industrial models 250C, 260C (340), 340, 345, 420, 445, 450, 540, 545, 2030, 3550, Replaces Ford OEM number 249127, (Item #: 104571) $6.00

Rear Rim Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Replaces Ford OEM number E9NN1043BB11G, (Item #: 155120) $31.00

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $18.80

Rim Stop Screw - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9600, 9700, Compatible with Ford Construction & industrial models 256V, 276, Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 81811263, C0NN1058A, Screw for stop body, Use with power adjust rims PAR10X28, C5NN1050J, and C5NN1050H, Rear rim stop screw, (Item #: 151948) $8.98

Spindle Bushing - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Replaces Ford OEM number D8NN3110AB, (Item #: 101139) $26.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 81811263, C0NN1058A. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $7.60

Wheel Bearing Kit - Used on many Ford / New Holland models using 10.00 x 16 inch front wheels, this kit contains 25590 bearing cone, 25521 bearing cup, 02474 bearing cone, 02420 bearing cup, 412920 seal (not shown). Replaces EAPN1200B, EHPN1190A, EHPN1200B, 8A411. Used on some of the following models: 3400, 3500, 3550, 4120, 4140, 4400, 4410, 4500, 5100, 5110, 5190, 5200, 5610, 6000, 7100, 7200, 8000, 8200, 8240, 8340, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35 (Item #: 100657, Ref: WBKFD7) $56.00

Wheel Bearing Kit - For Ford tractor models TW10, TW20, TW30, TW35, 8000, 8530, 8630, 8700, 8730, 8830, 9700, Kit includes an inner cone, inner cup, outer cone, outer cup, Seal not included, (Item #: 100658) $37.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $350.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $111.67

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $20.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.50

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $12.20

Electrical System

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $126.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $13.50

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $59.00

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.90

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $5.10

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $28.00

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.40

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $8.00

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $78.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $113.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $126.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $100.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $151.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $180.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $126.00

$Ford 9700 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $3.80

$Ford 9700 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $2.91

$Ford 9700 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $6.30

$Ford 9700 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $3.18

$Ford 9700 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $7.10

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.68

$Ford 9700 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.40

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $11.52

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $14.60

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $10.20

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $10.30

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $11.80

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $15.69

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $17.00

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $20.98

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $20.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.80

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $6.90

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.90

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.80

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.50

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $11.10

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $65.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $44.00

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $14.90

Hitch / Drawbar

Drawbar - Number Of Drawbar Holes: 11 Hole Made of 1" x 2-1/2" high carbon steel Category: 1 Length: 26" End Pins: 7/8" Hitch Pin Holes - 3/4" (Item #: 103174, Ref: 9N5182) $44.00

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $50.39

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $13.70

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $20.70

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $24.10

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $22.00

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $21.50

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $34.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $119.41

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $20.70

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $38.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $12.30

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $13.80

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $27.80

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $15.80

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $72.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $12.60

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $57.00

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $15.80

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.50

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $20.10

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $20.80

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $800.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $649.49

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $76.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $55.00

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $70.00

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $336.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $15.70

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $15.70

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $15.10

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $16.90

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $192.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $134.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $39.00

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $58.00

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $70.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $115.00

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $153.00

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $96.61

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $188.00

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $59.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $76.41

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $56.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $18.80

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $24.50

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $21.60

Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $6.00

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $69.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $25.60

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $8.00

Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $85.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $13.00

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $66.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $22.20

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $7.30

Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $24.00

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.80

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $8.60

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $61.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $25.60

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $9.70

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $23.60

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $9.60

Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $60.00

Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $25.60

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $26.30

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.60

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $100.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $41.00

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $11.40

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $76.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $207.17

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $323.00

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $81.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $92.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $86.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $300.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $54.00

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $37.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $93.00

Sheet Metal / Body Parts

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $180.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $54.00

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $144.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $16.40

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $25.70

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $304.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $120.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $81.58

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $18.70

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $18.40

Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $67.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $71.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.50

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $130.00