Welcome! Please use the navigational links to explore our website.

FREE SHIPPING on orders above $249.99!   Details

PartsASAP Logo Company Logo
(800) 853-2651
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 840 Tractor Parts

[Categories]   [All Ford Models]   [Print]  


Brakes
Ford 840 Brake Adjusting Hole Cover
Brake Adjusting Hole Cover
- This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Item #: 125733, Ref: H2092) $9.10

Ford 840 Brake Anchor Pin Retainer, Pack of 2
Brake Anchor Pin Retainer, Pack of 2
- This brake anchor pin retainer is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964) (Item #: 192534, Ref: NCA22286A) $16.90

Ford 840 Brake Back Plate Dust Seal
Brake Back Plate Dust Seal
- This brake back plate dust seal is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1958 to 1964). (Item #: 185115, Ref: NCA2217A) $12.10

Ford 840 Brake Camshaft Hole Cover Spring
Brake Camshaft Hole Cover Spring
- This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Item #: 178191, Ref: 8N2322) $4.30

Ford 840 Brake Cross Shaft Bushing
Brake Cross Shaft Bushing
- Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Item #: 178169, Ref: 782477) $8.10

Ford 840 Brake Drum
Brake Drum
- ***USE PART NUMBER NCA1126A *** For tractor models 2000, 4000, 4110 with L/Differential Lock 1965 thru 3/1968. Also for 600, 601, 700, 701, 800, 801, 900, 901 all after 1954. AN ADDITIONAL $12 shipping will be added to your order due to weight of item. (Item #: 105493, Ref: 86533415) $100.00

Ford 840 Brake Drum
Brake Drum
- This cast iron brake drum is for tractor models 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (Prior to 10/1965). Replaces 86533415, NCA1126A. (Item #: 105493, Ref: NCA1126A) $100.00

Ford 840 Brake Drum Retaining Screw Set
Brake Drum Retaining Screw Set
- For Ford tractor models NAA, 8N, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981, Replaces Ford OEM number 24667S, 24667S8, Set of 4, Order two sets per tractor, 3/8" -16 x 3/4", For Individual Screw use Item #: 125738, (Item #: 185398) $2.20

Ford 840 Brake Drum Screw
Brake Drum Screw
- Single drum screw of 3/8 inch-16 x 3/4 inch screws. Order quantity of 4 for complete kit. Used on 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 981. Order 2 sets per tractors. (Item #: 125738, Ref: 24667) $1.20

Ford 840 Brake Repair Kit
Brake Repair Kit
- This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Majors. Kit includes all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Kit does not include shoes. Kit is complete for one wheel. Replaces: (4) Spring Clip: 6H2066, (1) Adjuster Socket: 8N2048, (1) Adjuster Nut: 8N2223, (1) Adjuster Screw: H2041, (1) Felt: NCA2217A, (2) Collar : NCA22218A, (2) Retainer Pin: NCA22276A, (2) Clip: NCA22286A, NCA2250, (1) Spring: NCA2296B, (2) Pins: NCA2333A, (2) Spring: NCA2204A, NCA22275A, NCA22219A (Item #: 105515, Ref: NCA2250) $46.00

Ford 840 Brake Shoe Adjusting Screw Spring
Brake Shoe Adjusting Screw Spring
- Must order 2. Price is for each. This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Item #: 182025, Ref: NCA22219A) $7.80

Ford 840 Brake Shoe Anchor Pin
Brake Shoe Anchor Pin
- This brake shoe anchor pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185113, Ref: NCA2333A) $4.40

Ford 840 Brake Shoe Anchor Pin Collar
Brake Shoe Anchor Pin Collar
- 1 inch outside diameter, 3/4 inch inside diameter, 9/16 inches wide. This brake shoe anchor pin collar is for tractor models: 501, 600, 601, 700, 701, 800, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185533, Ref: NCA22218A) $1.50

Ford 840 Brake Shoe Hold Down Spring Pin
Brake Shoe Hold Down Spring Pin
- Priced for 1, must order 2 - This brake shoe hold down spring pin is for tractor models 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1955 to 1964). (Item #: 185118, Ref: NCA22276A) $0.90

Ford 840 Brake Shoe Retracting Spring
Brake Shoe Retracting Spring
- This brake shoe retracting spring is for tractor models 501, 600, 700, 800, 900, 2000, 4000 series (1955 to 1964). (Item #: 114882, Ref: NCA2296B) $18.00

No
Picture
Brake Shoe Return Spring
- For Ford tractor models 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140 (all 4 cylinder 1955-'64), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NCA2204A, (Item #: 182026) $6.40

Ford 840 Brake Shoe Return Spring, RH Brake
Brake Shoe Return Spring, RH Brake
- This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Item #: 178084, Ref: NCA2204A) $6.70

Ford 840 Brake Shoe with Lining, Pack of 2 Shoes
Brake Shoe with Lining, Pack of 2 Shoes
- This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1955 to 1964). (Item #: 105488, Ref: NCA2218B) $39.00

Ford 840 Parking Brake Lever
Parking Brake Lever
- For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Item #: 126597, Ref: NAA2782A) $22.80

Clutch
Ford 840 Clutch Alignment Tool
Clutch Alignment Tool
- 1-3/8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Item #: 119892, Ref: 1112-5996) $9.10

Ford 840 Clutch Alignment Tool - .655 inch x 15 Spline
Clutch Alignment Tool - .655" x 15 Spline
- For Ford tractor models NAA, 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 700, 701, 740, 741, 800, 801, 820, 840, 850, 851, 900, 901, 941, 950, 951, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 5010, Compatible with Ford Construction and industrial models 1801, 1821, 1841, Tool For 1" 15 Spline Disc Using .655" ID Pilot Bearing, (Item #: 119884) $12.10

Ford 840 Clutch Disc
Clutch Disc
- Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Item #: 111601, Ref: 91A7550WHD) $31.50

Ford 840 Clutch Disc
Clutch Disc
- This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3/8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Item #: 113378, Ref: NCA7550A) $77.00

Ford 840 Clutch Disc
Clutch Disc
- For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NCA7550A, 313299, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 169785) $62.00

Ford 840 Clutch Disc, 9 inch
Clutch Disc, 9 inch
- Clutch Disc: 9 inch Organic, Spring Loaded, 15 Splines, 1 inch Hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Item #: 130147, Ref: E8NN7550GA) $79.00

Ford 840 Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206192) $86.01

Ford 840 Clutch Disc, Remanufactured
Clutch Disc, Remanufactured
- For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Clutch Size: 10", Clutch Hub: 1-3/8", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206193) $86.01

Ford 840 Clutch Disc, Remanufactured, D8NN7550FA, 82006019
Clutch Disc, Remanufactured, D8NN7550FA, 82006019
- For Ford tractor models Dexta, Super Dexta, 600, 601, 800, 801, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number D8NN7550FA, F0NN7550FA, E8NN7550GA, Replaces New Holland OEM number 82006019, 86640504, 86640503, 960E7550, Clutch Size: 9", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Springs, Clutch Type: Woven, For a New version of this sku use Item #: 130147, (Item #: 204475) $75.50

Ford 840 Clutch Disc, Remanufactured, NDA7550B
Clutch Disc, Remanufactured, NDA7550B
- For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Replaces Ford OEM number NDA7550B, Clutch Size: 10", Clutch Hub: 1", Clutch Spline: 15, Clutch Center: Spring, Clutch Type: Woven, (Item #: 206191) $88.50

Ford 840 Clutch Fork To Cross Shaft Pin
Clutch Fork To Cross Shaft Pin
- This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Item #: 178203, Ref: 352581S8) $2.20

Ford 840 Clutch Kit
Clutch Kit
- This new dual stage, 9 inch clutch kit contains a 9 inch, 15 Spline Drive Disc with 29 Spline Double Pressure Plate Assembly (311435). Includes Pilot Bearing (C5NN7600A) and Release Bearing (83914247). The pressure plate assembly is larger than the 9 inch captive discs. Note: Pilot Tool is not included and not needed in this kit. For live PTO Double Clutch Models (1955 to 1964). This clutch kit is used on tractor models: 600, 700, 800, 900, 2000 4 cylinder, 4000 4 cylinder, Dexta, Super Dexta. (Item #: 112330, Ref: 311435K_) $400.00

Ford 840 Clutch Kit 10 Inch
Clutch Kit 10 Inch
- This 10 inch Single Clutch Kit has a 10 inch 10 Spline on a 1 3/8 inch hub Spring Drive Disc NCA7550A, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool. This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900 (1953 to 1957). Fingers do not have counter-weights. (Item #: 114298, Ref: 1112-5987) $182.00

Ford 840 Clutch Kit, 10 Inch, Single Clutch
Clutch Kit, 10 Inch, Single Clutch
- Kit contains new 10" pressure plate assembly (8-springs), NEW 10" DISC (15 spline, 1" hub), release bearing, pilot bearing. For the following tractors with 4 or 5 speed transmission 1953-1964): 600, 620, 630, 640, 650, 601, 611, 621, 631, 641, 651, 700, 740, 750, 701, 741, 800, 820, 840, 801, 811, 821, 841, 851, 900, 950, 901, 941, 951, 2000, 4000. (Item #: 119868, Ref: NDA7563ANC) $150.00

Ford 840 Clutch Kit, 10 Inch, Single Clutch
Clutch Kit, 10 Inch, Single Clutch
- This 10 inch Single Clutch Kit has a 10 inch 15 Spline on a 1 inch hub Spring Drive Disc E8NN7550FA, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool (not shown). This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900, 1841, 2000 4 cylinder, 4000 4 cylinder. (Item #: 119868, Ref: NDA7563AK) $150.00

Ford 840 Clutch Kit, 9 Inch, Single Clutch
Clutch Kit, 9 Inch, Single Clutch
- This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Item #: 121833, Ref: 8N7563K) $117.00

Ford 840 Clutch Kit, Remanufactured
Clutch Kit, Remanufactured
- For Ford tractor models Dexta, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Clutch Diameter - 9", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Spring or Solid, Clutch Type - Woven, Pressure Plate Size - 9", Pressure Plate Levers - 6, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-7/8", Pressure Plate Splines - 29, (Item #: 202041) $470.01

No
Picture
Clutch Kit, Remanufactured
- For Ford tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2031, 2111, 2130, 2131, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Clutch Diameter - 10", Clutch Hub Diameter - 1", Clutch Splines - 15, Clutch Center - Spring, Clutch Type - Woven, Pressure Plate Size - 10", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Type - Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202045) $182.01

Ford 840 Clutch Release Arm Kit
Clutch Release Arm Kit
- This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Item #: 182518, Ref: S.66657) $83.00

Ford 840 Clutch Release Shaft, Used
Clutch Release Shaft, Used
- For Ford tractor models NAA, 2N, 8N, 9N, 501, 541, 600, 601, 620, 621, 630, 640, 641, 650, 660, 700, 701, 740, 741, 800, 801, 820, 840, 841, 850, 860, 900, 950, 960, 2000, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 4040, 4140, Replaces Ford OEM number B7510A2, For a new version of this item use Item #: 183687, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 459482) $13.01

Ford 840 Clutch Release Throw Out Bearing - Greaseable
Clutch Release Throw Out Bearing - Greaseable
- Compatible with Ford Tractor(s) NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 4000, 4100, 4110, 4410, 4600, 4600SU I.D.: 2.0625" O.D.: 3.562" Thickness: .812" Replaces Ford OEM nos C7NN7580A, C0NN7580A, E1ADKN7580B (Item #: 113482) $19.30

Ford 840 Clutch Shaft Bushing
Clutch Shaft Bushing
- This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Item #: 178029, Ref: 407508A) $7.50

Ford 840 Eyebolt, Clutch
Eyebolt, Clutch
- For Ford tractor models NAA, 8N, 600, 700, 800, 900, Replaces Ford OEM number 355584S8, 7/16" x 20 x 2.68, (Item #: 166065) $14.80

Ford 840 Pilot Bearing
Pilot Bearing
- This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Item #: 107933, Ref: C5NN7600A) $3.40

Ford 840 Pressure Plate
Pressure Plate
- This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Item #: 172898, Ref: 8N7563) $92.00

Ford 840 Pressure Plate
Pressure Plate
- For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a Remanufactured version of this sku use Item #: 204476, (Item #: 135034) $493.00

Ford 840 Pressure Plate, 10 Inch, Single Clutch
Pressure Plate, 10 Inch, Single Clutch
- This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Item #: 172999, Ref: B8NN7563A) $154.00

Ford 840 Pressure Plate Assembly, Remanufactured, 09A7563, 8N7563
Pressure Plate Assembly, Remanufactured, 09A7563, 8N7563
- For Ford tractor models Dexta, NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 620, 621, 630, 631, 640, 641, 650, 651, 660, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 850, 851, 900, 901, 941, 950, 951, Replaces Ford OEM number 09A7563, 8N7563, Pressure Plate Size: 9", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, (Item #: 205807) $78.01

Ford 840 Pressure Plate, Remanufactured, 957E7502B
Pressure Plate, Remanufactured, 957E7502B
- For Ford tractor models Dexta, NAA, Super Dexta, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 2030, Replaces Ford OEM number 957E7502B, Pressure Plate Size: 9", Pressure Plate Type: Dual Stage, For a New version of this sku use Item #: 135034, Additional Handling and Oversize Fees Apply To This Item, (Item #: 204476) $395.00

Ford 840 Pressure Plate, Remanufactured, NDA7563A
Pressure Plate, Remanufactured, NDA7563A
- For Ford tractor models NAA, 600, 700, 800, 900, 1800, 2000, 2031, 2100, 2110, 2111, 2130, 2131, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 2030, Replaces Ford OEM number NDA7563A, 86640482, Pressure Plate Size: 10", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 204582) $95.01

Ford 840 PTO Disc
PTO Disc
- 9.062 inch included with pressure plate, rigid disc, organic, 1.875 inch spline diameter, 29 spline. For tractor models 600, 800, 900, Super Dexta. Replaces E55GC9, 83916953, F0NN7550EA, 82006018 (Item #: 178428, Ref: 323033516) $143.00

Ford 840 Release Bearing
Release Bearing
- Clutch Release Bearing. Inside diameter 2.4997 inches, outside diameter 4.0700 inches, 0.8700 inches wide. This is used in multiple Ford Tractors. Replaces original part numbers NDA1585, NDA7580, NDA7580B, D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $22.00

Ford 840 Release Bearing
Release Bearing
- This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Item #: 107007, Ref: N1087) $20.70

Ford 840 Release Bearing Hub
Release Bearing Hub
- This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Item #: 163512, Ref: 9N7561) $43.40

Ford 840 Release Bearing Spring
Release Bearing Spring
- This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Item #: 121564, Ref: 9N7562) $8.30

Cooling System
Ford 840 Fan, 5 Blade
Fan, 5 Blade
- Measure before ordering. Many of the models listed used more than one size fan. This fan measures 16 inch diameter, 0.625 inch pilot hole, and a 1.75 inch bolt circle (around the perimeter). Used on Ford tractors 1955-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 500, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 900, 901 (Item #: 163821, Ref: F8JL8600CA) $182.00

Ford 840 Fan Belt
Fan Belt
- This fan belt fits 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Some of these tractors used more than one type of belt. Verify part number before ordering. (Item #: 116686, Ref: EAF8577A) $8.20

Ford 840 Fan Blade, 3 Blade
Fan Blade, 3 Blade
- This 3 blade fan measures 16 inches in diameter. Fits tractor models: 501, 600 Series, 601 Series, 800 Series, 801 Series, 900 Series, 901 Series, 2000, 4000 1955 to 1964. 4 cylinder gas. 3.120 inch bolt circle, .625 inch pilot hole. USED WITH WATER PUMPS CDPN8501C and DCPN8501A. May come painted black, primer gray or primer red. (Item #: 100771, Ref: NCA8600S) $40.00

Ford 840 Fan Blade, 6 Blade
Fan Blade, 6 Blade
- This 6 blade fan is for tractor models 2000, 4000, 600, 800, 900. This 6 blade fan has a .5 inch pilot hole, 3.15 inch 4 hole mounting center, 15.5 inch outside diameter. (Item #: 155378, Ref: NCA8600B) $74.00

Ford 840 Fan Blade, 6 Blade, Pusher
Fan Blade, 6 Blade, Pusher
- 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Item #: 114598, Ref: JE8600A) $92.00

Ford 840 Fan Shroud
Fan Shroud
- For tractor models 501, 541, 600, 601, 611, 621, 700, 800, 900, NAA, (2000, 2110, 2120, 4000, 4110 All before 1964), 2111, 4120, 4121. (Item #: 109990, Ref: NCB8146A) $77.00

Ford 840 Fan Shroud
Fan Shroud
- This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Item #: 109990, Ref: NCA8146A) $77.00

Ford 840 Fan Shroud Hardware Kit
Fan Shroud Hardware Kit
- This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Item #: 178200, Ref: 357622-K) $5.80

Ford 840 Radiator
Radiator
- This radiator has 3 rows of tubes, stamped steel inlets and outlets. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964 4 cylinder tractors, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1/4 inches. Note, the draincock on this ratiator is on the lower front. This might interfere with narrow front end and indusctial models. If your draincock is located on a cast lower outlet pipe, order 135045 (Item #: 101693, Ref: C5NN8005ABECON) $200.00

Ford 840 Radiator
Radiator
- This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B. (Item #: 135045, Ref: C5NN8005AB) $340.00

Ford 840 Radiator Cap
Radiator Cap
- This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Item #: 108081, Ref: 1T8100A2) $10.60

Ford 840 Radiator Hose Clamp
Radiator Hose Clamp
- This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Item #: 178164, Ref: 608287) $3.60

Ford 840 Radiator Hose, Lower
Radiator Hose, Lower
- This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 108082, Ref: 312588) $5.50

Ford 840 Radiator Hose, Lower
Radiator Hose, Lower
- This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Item #: 182499, Ref: 313151) $14.50

Ford 840 Radiator Hose, Upper
Radiator Hose, Upper
- This upper radiator hose is for tractor models NAA, Jubilee, 600 series, 700 series, 800 series, 900 series, 2000 4-cylineder, 4000 4 cylinder Series. It can replace 310048. This hose measures 7 3/8 inches long, 1 1/2 inch outside diameter and 1 3/16 inside diameter. (Item #: 108083, Ref: NAA8260B) $3.70

Ford 840 Radiator Mounting Bolt Kit
Radiator Mounting Bolt Kit
- These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Item #: 182536, Ref: 351641S8) $8.10

Ford 840 Radiator Mounting Pads, Pack of 2
Radiator Mounting Pads, Pack of 2
- This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Item #: 109978, Ref: 180705M1) $2.30

Ford 840 Thermostat
Thermostat
- This thermostat is 160 degree lo-temp. For gas engines 1953 to 1964. For gasket, order 191970 (Item #: 113939, Ref: EAF8575BWG) $13.20

Ford 840 Thermostat Housing
Thermostat Housing
- This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Item #: 160754, Ref: 310031) $51.00

No
Picture
Thermostat Housing, Used
- For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number 310031, For a new version of this item use Item #: 160754, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436243) $29.01

Ford 840 Water Pump Cover Plate Gasket
Water Pump Cover Plate Gasket
- For all 4-cylinders 1953-1964. Price is for each. (Item #: 156680, Ref: EAF8507B) $3.00

Ford 840 Water Pump Kit
Water Pump Kit
- This water pump repair kit is for Water Pump CDPN8501C used on 4 cylinder gas engines on tractor models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. Kit includes gasket and all parts necessary to rebuild pump. Replaces all moving parts. Replaces FPN8591A. (Item #: CPN8591B) $42.00

Ford 840 Water Pump Mounting Gasket
Water Pump Mounting Gasket
- Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Item #: 150390, Ref: EAF8513A) $2.50

Ford 840 Water Pump Replacement Kit
Water Pump Replacement Kit
- Kit includes CDPN8501C water pump with press on pulley, 312588 lower hose, NAA8260B upper hose, EAF8577A fan belt, hose clamps, gasket, and clamp key. It is used on Ford 134 and 172 cubic inch engines in models from 1955-1964 with manual steering. YTO-119845 (Item #: 185544, Ref: 119845) $98.00

Ford 840 Water Pump Replacement Kit
Water Pump Replacement Kit
- Kit includes CDPN8501C water pump with gasket, NAA8260B upper hose, 313151 lower hose, 2- EAF8577A fan belts (one for generator one for power steering Pump), 4 hose clamps, and clamp key. This kit is used on Ford tractors, 1955-1964, with 134, 144 and 172 cubic inch 4 cylinder engines and power steering (factory or added). YTO-119846 (Item #: 185546, Ref: 119846) $92.00

Ford 840 Water Pump Sealant
Water Pump Sealant
- RTV Blue 3.35 oz. tube. (Item #: 178141, Ref: PRM77BR) $10.90

Ford 840 Water Pump - uses Bolt-On Pulley
Water Pump - uses Bolt-On Pulley
- This water pump uses the bolt on style pulley, which does not come with the water pump and is not available. For tractor models 600, 601, 700, 701, 800, 801, 900, 2000, 4000 - 172 inch industrial gas and diesel engines (Item #: 100557, Ref: DCPN8501A) $51.00

Ford 840 Water Pump - with Press-On Pulley
Water Pump - with Press-On Pulley
- This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pulley and is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S or NCA8600B 6 Blade Fan Uses 4 1/4 inch mounting bolts on a 3 1/4 inch circle. (Item #: 100556, Ref: S.60627) $45.00

Decals and Emblems
Ford 840 Decal Set
Decal Set
- Decal Set for Ford Model 850 (Item #: 183094, Ref: R4129) $58.00

Ford 840 Decal Set, Complete
Decal Set, Complete
- This complete decal set is for the Ford 800 Series. For model 800. (Item #: 101995, Ref: R4667) $51.00

Ford 840 Ford Script Painting Mask
Ford Script Painting Mask
- This Ford script painting mask set includes 2 smaller 7-1/4 inch x 1-3/4 inch and 2 large 9 inch x 3 inch Ford script painting masks for tractor models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Item #: 178198, Ref: S.67163) $21.40

Ford 840 Hood Emblem
Hood Emblem
- This hood emblem is for the 800 Series (bright metal with red background) (Item #: 107982, Ref: NDA16600A) $70.00

Drive Train
Ford 840 2nd Mainshaft and Countershaft Gears
2nd Mainshaft and Countershaft Gears
- For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number B9NN7114A, B9NN7A381B, 4 Speed Only, 2 Piece Set, (Item #: 110911) $167.00

Ford 840 Axle Rear Bearing Race
Axle Rear Bearing Race
- This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Item #: 109579, Ref: 9N4222) $11.20

Ford 840 Axle Rear Collar
Axle Rear Collar
- This rear axle collar is for tractor models 600, 800, 601, 801, 2000, 4000. (Item #: 128478, Ref: NCA4132A) $16.60

Ford 840 Axle Seal, Inner Seal
Axle Seal, Inner Seal
- This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref: 8N4233A) $6.30

Ford 840 Bearing Cone
Bearing Cone
- This differential Bearing cone is for tractor models 4120, 800, 801. (Item #: 112127, Ref: NDA4221A) $36.90

Ford 840 Bearing Cone, Rear Axle
Bearing Cone, Rear Axle
- This rear axle outer bearing cone is for tractor models 2120, 4120, 600, 800. (Item #: 176639, Ref: NCA44224A) $82.00

Ford 840 Bearing Cone, Rear Pinion
Bearing Cone, Rear Pinion
- This is a rear pinion tapered bearing cone. (Item #: 182969, Ref: NCA4630A) $94.00

Ford 840 Bearing Cone, Rear Pinion
Bearing Cone, Rear Pinion
- This is a rear pinion tapered bearing cone. (Item #: NDA4630A) $63.74

Ford 840 Bearing Cup
Bearing Cup
- This differential bearing cup is for tractor models 800, 801, 4000, 2000. (Item #: 112126, Ref: NDA4222A) $7.40

Ford 840 Bearing Cup
Bearing Cup
- This rear pinion tapered bearing cup is for tractor models 3500, 4120, 800, 801. (Item #: 114627, Ref: NDA4628A) $52.00

Ford 840 Bearing Cup
Bearing Cup
- This rear pinion tapered bearing cup is for tractor models 2120, 4120, 600, 601, 800, 801. (Item #: TBAA4628A) $37.52

Ford 840 Bearing, Transmission
Bearing, Transmission
- This transmission bearing is used in 4 and 5 Speed Transmissions. For tractor models 2000, 4000, 600, 800, 900. (Item #: M1208EL) $51.58

Ford 840 Bearing, Transmission, Output Shaft
Bearing, Transmission, Output Shaft
- This transmission output shaft bearing is for tractor models 2000 and 4000 1965 and prior, 600, 800, 900. All the above with 5 Speed Transmissions. (Item #: 172983, Ref: NDA77060A) $24.65

Ford 840 Center Housing to Axle Housing Gasket
Center Housing to Axle Housing Gasket
- Used on 800, 4120, 801 with heavy duty front end and heavy duty industrial. 13 Mounting Holes, 0.010 Inches Thick, 17-7/16 Inches O.D., 15-3/8 Inches I.D.. Replaces OEM number NDA4036A (Item #: 112051, Ref: NDA4036A) $10.10

Ford 840 Center Housing to Transmission Case Gasket
Center Housing to Transmission Case Gasket
- This Center Housing to Transmission Case Gasket early 4 speed transmission up to tractor serial number 14256 (1954 to early 1955) If you have a 4 Speed transmission above serial number 14256 use part number 310590. (Item #: 179804, Ref: NCA44025A) $5.30

Ford 840 Center Housing To Transmission Case Gasket
Center Housing To Transmission Case Gasket
- This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Item #: 178192, Ref: 310590) $4.60

Ford 840 Countershaft
Countershaft
- This countershaft is for tractor models 600, 700, 800, 2000, 4000 (1955-1964), and for 2000, 3000 4-Speed Transmission with PTO (1965-1970). Also replaces NDA7111C. (0622R) (Item #: 126176, Ref: C5NN7N109A) $199.00

Ford 840 Countershaft Bearing Cone
Countershaft Bearing Cone
- This front transmission countershaft bearing cone is for 4 and 5 Speed Transmissions. For tractor models: 2000 and 4000 before 1964, and 600, 800, 900. (Item #: 109682, Ref: NDA77123A) $10.80

Ford 840 Countershaft Bearing Cup
Countershaft Bearing Cup
- This transmission countershaft bearing cup is for 4 and 5 speed transmissions. For tractor models: 2000 and 4000 prior to 1964 and for 600, 800, 900. (Item #: 111704, Ref: NDA77124A) $8.80

Ford 840 Differential Front Pinion Bearing Cup
Differential Front Pinion Bearing Cup
- This differential front pinion bearing cup is for tractor models 2120, 3500, 4120, 600, 601, 800, 801. (Item #: NCA4616A) $14.99

Ford 840 Differential Gasket Kit
Differential Gasket Kit
- This differential gasket and o-ring kit is for tractor models 800. (Item #: 185714, Ref: DGK800) $22.00

Ford 840 Differential Pinion Pilot Bearing
Differential Pinion Pilot Bearing
- This differential pinion pilot bearing is for tractor models 2N (1939 to 1952), 4120 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 800 with 4 speed transmission serial number <54166 - 1958, 5 speed transmission serial number <106115 - 1960, 801 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 8N (1939 to 1952), 9N (1939 to 1952). (Item #: 172931, Ref: BB4625B) $97.00

Ford 840 Differential Pinion Seal
Differential Pinion Seal
- This differential pinion seal is for tractor models (2120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (4120 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106115 and up), (600 with 4 speed transmission serial number 54165 and below, 5 speed serial number 196155 and below), (601 with 4 speed transmission serial number 54166 and up, 5 speed transmission serial number 106116 and up), (800 with 4 speed transmission serial number 54166 and below, 5 speed transmission serial number 106115 and below), (801 with 4 speed transmission serial number 54166 and up 5 speed transmission serial number 106115 and up). (Item #: 172933, Ref: 312356) $7.50

Ford 840 Gasket, Drain Plug
Gasket, Drain Plug
- Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Ford 840 Gear, 1st, 4 Speed Transmission
Gear, 1st, 4 Speed Transmission
- This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref: 8N7100) $289.00

Ford 840 Gear, 3rd, 4 Speed Transmission
Gear, 3rd, 4 Speed Transmission
- This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref: 8N7102) $251.00

Ford 840 Gear, Mainshaft 2nd
Gear, Mainshaft 2nd
- This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref: B9NN7A381B) $131.00

Ford 840 Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission
Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission
- This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set) $193.00

Ford 840 Gear Shift Boot
Gear Shift Boot
- This gear shift boot has a bottom hole that is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Item #: 108079, Ref: C5NN7277C) $3.20

Ford 840 Gear Shift Lever Spring
Gear Shift Lever Spring
- Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Item #: 155070, Ref: 9N7227B) $11.50

Ford 840 Gear Shift Lever, with Knob, 4-Speed Transmission
Gear Shift Lever, with Knob, 4-Speed Transmission
- This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Item #: 110007, Ref: C5NN7202B) $84.00

Ford 840 Gear Shift Pin
Gear Shift Pin
- This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Item #: 169927, Ref: 9N7221B) $5.70

Ford 840 Input Drive Shaft
Input Drive Shaft
- This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Item #: 179301, Ref: 2N7017A) $261.37

Ford 840 Input Shaft
Input Shaft
- This is an input shaft used on Sherman Step-Up/Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Item #: 178936, Ref: C3NN7015D) $234.00

Ford 840 Input Shaft
Input Shaft
- This input shaft is for the 4 Speed transmission. It has 15 Spline, and is 17 inches in overall length. It is for tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Item #: 179311, Ref: 311203) $192.00

Ford 840 Oil Seal, Main Drive Gear
Oil Seal, Main Drive Gear
- This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Item #: 109957, Ref: 8N7052A) $8.80

Ford 840 PTO Countershaft
PTO Countershaft
- This PTO Countershaft is used in 5 Speed Transmissions 1955-1964. (Item #: 178942, Ref: NDA701B) $183.00

Ford 840 PTO Shaft HD
PTO Shaft HD
- For Ford tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (all 1964 - earlier), Replaces Ford OEM number 312428, Heavy Duty, 32.620" Long, 1-3/8", 6 Spline, (Item #: 153389) $135.00

Ford 840 Seal, Rear Axle Shaft
Seal, Rear Axle Shaft
- This rear axle shaft outer oil seal is for plain axle shaft with sweat collar on tractor models: 600, 700, 800, 900, 2120, 4120. 2.500 inch inside diameter, 3.500 inch outside diameter. Replaces A157317, A24166, A7792, D63674, T11961, 81803465, 83906991, 86531244, D5NN4115B, DKN6362A, E1ADKN6362A, NCA4251B, 300845C91 (Item #: 176468, Ref: D5NN4115B) $8.20

Ford 840 Sherman Transmission External Lever
Sherman Transmission External Lever
- Step Up/Step Down lever. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 with Sherman trans. (Item #: 182895, Ref: 10A909) $119.00

Ford 840 Sherman Transmission External Lever
Sherman Transmission External Lever
- Step Up/Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Item #: 182895, Ref: 9N7210) $119.00

Ford 840 Shift Cover Plate Gasket
Shift Cover Plate Gasket
- For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Item #: 109958, Ref: 8N7223) $3.60

Ford 840 Shift Knob
Shift Knob
- ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Item #: 110012, Ref: BB7213A) $4.20

Ford 840 Side Cover Gasket
Side Cover Gasket
- This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Item #: 112236, Ref: 9N4131) $1.10

Ford 840 Transmission Bearing
Transmission Bearing
- Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref: 9N7120) $96.00

Ford 840 Transmission Bearing Cone
Transmission Bearing Cone
- Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 110536, Ref: 9N7066) $11.90

Ford 840 Transmission Bearing Cup
Transmission Bearing Cup
- Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 121348, Ref: 9N7067) $27.50

Ford 840 Transmission Drain Plug, Magnetic
Transmission Drain Plug, Magnetic
- Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref: 8N7010) $18.40

Ford 840 Transmission Rebuild Kit
Transmission Rebuild Kit
- This Transmission Rebuild Kit is for 600, 700, 800, 900 Series, 2000, 4000 using 4-speed transmissions (1955-1964). This Transmission Bearing and Seal Kit contains seals, bearings and gaskets required for transmission rebuild. (Item #: 178958, Ref: TSBK5564) $337.00

Electrical System
Ford 840 12 Volt Conversion Kit
12 Volt Conversion Kit
- For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not for industrial or diesel tractors. Includes unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not contain coil as the ignition system remains at 6 volts. If your proofmeter is driven off your generator, this alternator does NOT have tach drive. (Item #: 103142, Ref: 5564-10300ALT) $186.95

Ford 840 Alternator
Alternator
- This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000, 600, 700, 800, 900. Also used with many other models for 12 volt conversion. Replaces 5564-10305SE. (Item #: 111377, Ref: 8NE10305SE) $90.00

Ford 840 Alternator Adjustable Arm
Alternator Adjustable Arm
- Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Item #: 172574, Ref: NAA10303) $20.30

Ford 840 Alternator Adjuster Bracket
Alternator Adjuster Bracket
- For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 6mm Thick, (1) 10.7mm Unthreaded Hole, (1) 8.5mm x 92mm Slot, 230mm OAL, (Item #: 164215) $11.20

Ford 840 Alternator Bracket, Base
Alternator Bracket, Base
- Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953 to 1964. (Item #: 172491, Ref: NAA10302) $35.80

No
Picture
Alternator Conversion Wiring Harness
- For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Number of Wires: 7, Additional Handling and Oversize Fees Apply To This Item, (Item #: 164235) $25.00

No
Picture
Alternator - Delco Style (12396)
- For Ford tractor models 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 961, 971, 981, 2000 (4-cylinder), 4000 (4-cylinder), Replaces manufacturer number ADR0188, 400-12396, Delco Style, Voltage: 12, Rotation: Clockwise, Amperage: 63 Self Exciting, Clock Position: 3, 1-Wire System, 13mm Wide Pulley, (Item #: 164229) $134.00

Ford 840 Alternator Mounting Bracket
Alternator Mounting Bracket
- For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1560, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3550, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4640, 4830, 4910, Steel, 9.5mm Thick, (2) 13mm Unthreaded Holes, (2) 10mm Unthreaded Holes, (Item #: 164214) $17.10

Ford 840 Alternator Pulley
Alternator Pulley
- For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Item #: 172594, Ref: AFD5035) $19.20

Ford 840 Battery Cable
Battery Cable
- For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Item #: 115792, Ref: FAE14301B) $13.90

Ford 840 Battery Cable
Battery Cable
- This Battery Cable is 14 inches long and is 2 Gauge. For models (600, 700, 800, 900, 1958-1964), (2000, 4000 all before 1964). Ground Cable. (Item #: 172920, Ref: D1NN14301G) $13.80

Ford 840 Battery Cable
Battery Cable
- For (600, 700, 800, 900), (2000, 4000 before 1964). Starter to Battery Cable. 12 Volt, 17 inches Long. (Item #: 178605, Ref: 311228) $16.00

Ford 840 Battery Cable
Battery Cable
- For NAA, Jubilee, 600, 700, 800, 900. All 1953 and up. Cable, 10 inches long. (Item #: 115745, Ref: D1NN14300G) $9.70

Ford 840 Battery Hold Down
Battery Hold Down
- Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 126636, Ref: NCA10728WN) $7.00

Ford 840 Cable Clip
Cable Clip
- This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5/8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Item #: 182920, Ref: 1A13377A) $2.80

Ford 840 Cable, Starter to Switch
Cable, Starter to Switch
- Switch to starter cable, 16 inches long. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Item #: 115783, Ref: 9N14431B) $10.50

Ford 840 Coil, Ignition 12V
Coil, Ignition 12V
- Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Item #: 105282, Ref: D8JL12029A) $16.20

Ford 840 Coil, Ignition 6V
Coil, Ignition 6V
- Standard 6 Volt Coil. Fits many models. (Item #: 105281, Ref: D4PE12029AA) $15.50

Ford 840 Coil - Six Volt
Coil - Six Volt
- This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref: 8BA12029) $25.30

Ford 840 Coil Wire Assembly
Coil Wire Assembly
- This Coil to Distributor Wire is exactly like the original, with molded ends. Used on Ford 4 Cylinder tractors from 1955-1965. Replaces original part number FDN14302A. (Item #: 182945, Ref: FDN14302A) $11.00

Ford 840 Complete Tune-up Kit
Complete Tune-up Kit
- For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all 4 cylidner gas), Replaces Ford OEM number 309787, Includes point set, condenser, rotor button, spark plugs, distributor cap and wire set, (Item #: 116748) $55.00

Ford 840 Condenser
Condenser
- For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Item #: 111198, Ref: FET12300A) $4.90

Ford 840 Distributor
Distributor
- With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Comes with Points and Cap. Replaces 311185. Can use Pertronix Electronic Ignition number 1244A if desired. (Item #: 105328, Ref: FDN12127A) $103.00

Ford 840 Distributor Bushing
Distributor Bushing
- This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Item #: 111462, Ref: 7RA12132A) $5.40

Ford 840 Distributor Bushing
Distributor Bushing
- For Ford tractor models NAA, 8N (s/n 263844-later), 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 7RA12233, For 4 cylinder models, (Item #: 111466) $3.30

Ford 840 Distributor Bushing and Shim Kit
Distributor Bushing and Shim Kit
- Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Item #: 178573, Ref: FDS3253) $39.00

Ford 840 Distributor Cap, Clip Held
Distributor Cap, Clip Held
- Fits Tractors: 8N serial number 263844 and above (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Item #: 100012, Ref: NCA12106A) $9.50

Ford 840 Distributor Cap Hold Down Clip
Distributor Cap Hold Down Clip
- This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref: 7RA12144) $4.60

Ford 840 Distributor Clamp Rivet
Distributor Clamp Rivet
- This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref: B12145) $1.30

No
Picture
Distributor Driven Gear
- For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Item #: FAD12390A) $44.89

Ford 840 Distributor Dust Cap
Distributor Dust Cap
- Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Item #: 105527, Ref: FAA12239A) $5.50

Ford 840 Distributor Point Set, 4-Cylinder
Distributor Point Set, 4-Cylinder
- For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Item #: 111315, Ref: D8NN12171AA) $3.90

Ford 840 Distributor Power Inlet Screw Kit
Distributor Power Inlet Screw Kit
- This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref: 350032-KIT) $7.50

Ford 840 Distributor Primary Conductor
Distributor Primary Conductor
- Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref: 8N12209) $5.70

Ford 840 Distributor Rotor Clip
Distributor Rotor Clip
- For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref: 8N12213) $3.60

Ford 840 Distributor Rotor, Side Mount Distributor
Distributor Rotor, Side Mount Distributor
- 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Item #: 111317, Ref: C0NN12200A) $3.10

Ford 840 Distributor Screw
Distributor Screw
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 350032S, For 4 cylinder models, (Item #: 111467) $4.60

Ford 840 Distributor Seal
Distributor Seal
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number D8NN12A118AA, FAA12476A, For 4 cylinder models, (Item #: 111463) $6.20

No
Picture
Distributor Washer
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number FAA12179A, (Item #: 113483) $16.50

Ford 840 Electronic Ignition Conversion Kit, 12V Negative Ground
Electronic Ignition Conversion Kit, 12V Negative Ground
- Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Item #: 105079, Ref: 1244A) $140.00

Ford 840 Electronic Ignition Conversion Kit, 12V Positive Ground
Electronic Ignition Conversion Kit, 12V Positive Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Item #: 182576, Ref: 1244AP12) $159.00

Ford 840 Electronic Ignition Conversion Kit - 6V Negative Ground
Electronic Ignition Conversion Kit - 6V Negative Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Item #: 182507, Ref: 1244AN6) $163.00

Ford 840 Electronic Ignition Conversion Kit, 6V Positive Ground
Electronic Ignition Conversion Kit, 6V Positive Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Item #: 105080, Ref: 1244AP6) $156.00

Ford 840 Generator
Generator
- New LUCAS type Generator 12 volt, 22 amp, 1965 to 1975, less pulley. 2000, 3000, 4000, 5000 Gas and Diesel. (620, 622 1967-1974). (7000 1971-1975 with 4-256). 1968 All 8000, 9000 series (up to 12/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley. Pulley is available (see part number C5NF10196B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A, C4NN10002B. The Generator can also be used as a 12 volt generator on 1955-1965 4 cylinder tractors. NOTE, this is not the same style generator used on 1955-1964 tractors. It can be used to replace a 6 volt generator on 1955-1964 tractors and convert them to 12 volt positive ground system. Includes tach drive. (Item #: 140527, Ref: C7NN10000C) $110.00

Ford 840 Generator Brush
Generator Brush
- For 6 volt generators on models: 600 series, 601 series, 700 series, 701 series, 800 series, 801 series, 900 series, 901 series, NAA, 2000 4 cylinder, 4000 4 cylinder. Replaces GFD7502, 142-14002, F-14, 027-504, 34450-501, C0AZ-10069-B, B4AZ-10069-A, FBN10069A, B4A-10043-A, C0AZ-10043-A, C0AF-10069-A, FAA10069A, B6A-10043-B, 01A-10069, 2900345, 0A-10069, 3B-7504 (Item #: 185288) $2.20

Ford 840 Generator Brush, 6 Volt, 2 Pack
Generator Brush, 6 Volt, 2 Pack
- For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901, For 6 Volt Generators For Listed Models, For Generator Brush, 6 Volt, 4 Pack use Item #: 185288, (Item #: 185289) $6.00

Ford 840 Generator Brush, 6 Volt, 4 Pack
Generator Brush, 6 Volt, 4 Pack
- For Ford tractor models NAA, 501, 600, 601, 621, 641, 651, 661, 671, 681, 700, 701, 800, 801, 861, 900, 901, For 6 Volt Generators For Listed Models, For Generator Brush, 6 Volt, 2 Pack use Item #: 185289, (Item #: 182467) $26.40

Ford 840 Generator Repair Kit
Generator Repair Kit
- For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Item #: 182496, Ref: GRK401) $35.70

Ford 840 Ignition Kit With Rotor - 4 Cylinder
Ignition Kit With Rotor - 4 Cylinder
- Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Item #: 100011, Ref: ATK7FAR) $9.10

Ford 840 Key Switch
Key Switch
- For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Item #: 105687, Ref: 8N3679C) $7.70

Ford 840 Main Wiring Harness
Main Wiring Harness
- This Main Wiring Harness includes headlight wiring. Does not include taillight wiring. This kit is designed for tractors that are not equipped with a fuel gauge. If you have a fuel gauge, please plan on reusing your gauge and sending unit wires. This harness is for gas with 6 volt generator systems and without fuel gauge (1953 - 1957). Replaces FDN14401B (Item #: 184664, Ref: FDN14401BOE) $167.00

Ford 840 Resistor
Resistor
- For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Item #: 105710, Ref: 8NE10306) $3.90

Ford 840 Spark Plug
Spark Plug
- For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Item #: 130072, Ref: AL437) $3.20

Ford 840 Spark Plug Wire Set, Custom, 4 Cyl.
Spark Plug Wire Set, Custom, 4 Cyl.
- For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. USA. Plug Wire Lengths: 6 inches, 8 inches, 11-1/4 inches, 17 inches. Coil Wire Length: 11-1/4 inches. (Item #: 155171, Ref: CPN12259CUSTOM) $18.60

Ford 840 Starter Boot
Starter Boot
- Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Item #: 126654, Ref: 8N11113) $5.10

Ford 840 Starter Drive
Starter Drive
- Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 110819, Ref: C1AF11350A) $31.20

Ford 840 Starter Drive
Starter Drive
- Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $11.50

Ford 840 Starter - Ford Style DD without Drive (3115)
Starter - Ford Style DD without Drive (3115)
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000, Compatible with Ford Construction and industrial models 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040, Replaces Ford OEM number B6A11002A, C3NF11002E, FAR11001A, FAR11002A, C3NF11002CR, Replaces manufacturer number 150-029, 3115, 44-4230, 44-9602, 44-9609, 44-9619, SA-519, SA-519A, SA-622, 91-02-5788, Starter drive gear not included, Ford Style Direct Drive without Drive Gear, Voltage: 12, Rotation: Clockwise, Shaft Length: 5-3/4", For Solenoid use Item #: 112209, (Item #: 112210) $115.00

Ford 840 Starter Post Kit
Starter Post Kit
- This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref: A9AZ11102B) $8.50

Ford 840 Starter Repair Kit
Starter Repair Kit
- For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major, Dexta, all 4 cylinder gas or diesel 1953-1964. (Item #: 183911, Ref: SRK403) $34.60

Ford 840 Starter Solenoid, 6 Volt
Starter Solenoid, 6 Volt
- This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. Insulated Base, does not ground through mounting bracket. Will work in tractors converted from 6 to 12 volts, using a 4 post solenoid. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Item #: 105690, Ref: 311007) $17.40

Ford 840 Starter Solenoid Assembly
Starter Solenoid Assembly
- This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, 3 post. Replaces: NCA11450A, DR1494, U925, U928, SW1, SW219 (Item #: 105677, Ref: NCA11450A) $14.70

Ford 840 Starter Switch
Starter Switch
- With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Item #: 105685, Ref: 8N11500WG) $16.50

Ford 840 Starter with Drive
Starter with Drive
- This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Item #: 112209, Ref: C3NF11002D) $125.00

No
Picture
Starter with Drive - 12 Volt
- 9 teeth, clockwise rotation. For 4000 4 CYL, 4030 1961-62, 4031 1960-62, 4040 1961-62, 4110TR 1963-64, 4120, 4121, 4130 4 CYL 63-64, 4131, 4140 4 CYL 63-64, 501, 541, 600, 6000, 601, 611, 620, 621, 630, 631, 640, 641, 650 1955-57, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, Jubilee, NAA. (Additional refundable $50 core charge). (Item #: 203616, Ref: C3NF11002CR) $331.01

Ford 840 Terminal Block
Terminal Block
- For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Item #: 165423, Ref: 8NNN14448A) $9.40

Ford 840 Tune-up Kit, Basic
Tune-up Kit, Basic
- This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune-up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. (Item #: 183923, Ref: 309787) $24.40

Ford 840 Voltage Regulator, 12 Volt 22A Generator
Voltage Regulator, 12 Volt 22A Generator
- For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Item #: 105538, Ref: C0NF10505A) $33.40

Ford 840 Voltage Regulator, 6 Volt
Voltage Regulator, 6 Volt
- This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 105537, Ref: FAG10505A) $28.00

Ford 840 Wiring Harness
Wiring Harness
- For Ford tractor models 1955 to 1957, 6 volt. Engine harness, does not include wire to front or rear lights. (Item #: 105715, Ref: FDN14401B) $33.00

Ford 840 Wiring Harness, 12 Volt Conversion
Wiring Harness, 12 Volt Conversion
- For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Item #: 164238, Ref: NAA10301) $18.40

Engine Bearings
Ford 840 Connecting Rod Bearing - .040
Connecting Rod Bearing - .040
- For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Bearing Size: .040" Oversize, Sold per journal, For Standard connecting rod bearing use Item #: 106265, (Item #: 106266) $5.30

Ford 840 Connecting Rod Bearing - Standard - Journal
Connecting Rod Bearing - Standard - Journal
- For Ford tractor models NAA (gas), 600 (gas), 601 (gas or diesel), 611 (gas), 620 (gas), 621 (gas), 630 (gas), 631 (gas), 640 (gas), 641 (gas), 650 (gas), 651 (gas), 660 (gas), 661 (gas), 671 (gas), 681 (gas), 700 (gas), 701 (gas or diesel), 740 (gas), 741 (gas), 761 (gas), 771 (gas), 800 (gas), 801 (gas or diesel), 811 (gas), 820 (gas), 821 (gas), 840 (gas), 841 (gas), 850 (gas), 851 (gas), 860 (gas), 861 (gas), 871 (gas), 881 (gas), 900 (gas), 901 (gas or diesel), 941 (gas), 950 (gas), 951 (gas), 960 (gas), 961 (gas), 971 (gas), 981 (gas), 2000 (gas or diesel), 4000 (gas or diesel), 6000 (gas or diesel), 6100 (gas or diesel), Compatible with Ford Engine (s) 134 (gas), 172 (diesel or gas), Replaces Ford OEM number 312026, 4P9944, Bearing Size: Standard, Sold per journal, (Item #: 106261) $11.20

Ford 840 Main Bearings - .010 inch Oversize - Set
Main Bearings - .010" Oversize - Set
- For Ford tractor models NAA, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Compatible with Ford Engine (s) 134, 172, Replaces Ford OEM number EAF6342F, EAF6331D, Bearing Size: .010" Oversize, Sold in complete sets, For Standard main bearing use Item #: 106272, (Item #: 106269) $43.20

Ford 840 Main Bearing Set, 134, 144, 172 Engines, .010
Main Bearing Set, 134, 144, 172 Engines, .010
- For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Item #: 182484, Ref: MBK134172-010) $64.00

Ford 840 Main Bearing Set, 134, 144, 172 Engines, .020
Main Bearing Set, 134, 144, 172 Engines, .020
- For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106270, Ref: MBK134172-020) $45.10

Ford 840 Main Bearing Set, 134, 144, 172 Engines, .030
Main Bearing Set, 134, 144, 172 Engines, .030
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106271, Ref: MBK134172-030) $32.80

Ford 840 Main Bearing Set, 134, 144, 172 Engines, .040
Main Bearing Set, 134, 144, 172 Engines, .040
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106272, Ref: MBK134172-040) $45.30

Ford 840 Main Bearing Set, 134, 144, 172 Engines, STD
Main Bearing Set, 134, 144, 172 Engines, STD
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 106267, Ref: MBK134172-STD) $42.00

Ford 840 Piston Pin Bushing
Piston Pin Bushing
- For tractor models NAA, Jubilee, (2000 prior to 1964), 500, 600, 601, 700, 701, (4000 gas from 1962-1964), (800, 900 1955-57), (801, 901 gas 1958-1962). Note, these no longer come with oil hole. It needs to be drilled. 4 Used Per Engine. Sold Individually. Replaces EAA6207A (Item #: 108670, Ref: EAA6207A) $5.80

Ford 840 Rod Bearing Pair, .001
Rod Bearing Pair, .001
- Rod Bearing Pair for 1 cylinder. .001 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184413, Ref: 312101-PAIR) $61.37

No
Picture
Rod Bearing Pair, .002
- Rod Bearing Pair for 1 cylinder. .002 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 184447, Ref: 312102-PAIR) $114.60

Ford 840 Rod Bearing Pair, .010
Rod Bearing Pair, .010
- Rod Bearing Pair for 1 cylinder. .010 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106263, Ref: 312103-PAIR) $12.20

No
Picture
Rod Bearing Pair, .020
- Rod Bearing Pair for 1 cylinder. .020 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106264, Ref: 312104-PAIR) $12.10

No
Picture
Rod Bearing Pair, .030
- Rod Bearing Pair for 1 cylinder. .030 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 106265, Ref: C0NN6211B-PAIR) $10.90

Ford 840 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020
- For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184403, Ref: CRK312104-020) $46.00

Ford 840 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030
- For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184520, Ref: CRK312026-030) $59.00

Ford 840 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040
- For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For tractor models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Item #: 185597, Ref: CRK312026-040) $54.00

Ford 840 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD
- With journals measuring 2.298 inches. For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Item #: 184749, Ref: CRK312026-STD) $53.00

Engine Gaskets
Ford 840 Camshaft Cover Gasket
Camshaft Cover Gasket
- For Ford tractor models NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2031, 2111, 2130, 2131, 4000, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number C0NN6A250A, Engines: 134, 172 gas / diesel, (Item #: 150041) $2.60

Ford 840 Crankshaft Oil Seal Packing, Pair
Crankshaft Oil Seal Packing, Pair
- This Crankshaft Oil Seal Packing is the original rope style rear crank shaft seal. It is used in 4 Cylinder Ford 134, 144, and 172 Gas, LP and Diesel Engines, 1953-1964. (Item #: 133438, Ref: EBU6701A) $6.60

Ford 840 Crankshaft Seal, Front
Crankshaft Seal, Front
- This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Item #: 106273, Ref: EAA6700B) $6.40

Ford 840 Crankshaft Seal Kit, Rear
Crankshaft Seal Kit, Rear
- This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Item #: 182525, Ref: C0NN6701AKIT) $32.30

Ford 840 Crankshaft Seal, Rear Pair
Crankshaft Seal, Rear Pair
- Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Item #: 106274, Ref: C0NN6701A) $11.90

Ford 840 Front Crankshaft Wear Sleeve
Front Crankshaft Wear Sleeve
- This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Item #: 184669, Ref: RP301112) $67.00

Ford 840 Full Gasket Set
Full Gasket Set
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 1955-1957) Replaces Ford OEM number CPN6008B, , Compatible with New Holland Hay Cutting (s) 907, 909, Includes crank seals, All with 1/2" bolts, Contains all gaskets necessary for a complete engine overhaul, (Item #: 106276) $85.00

Ford 840 Head Gasket 134\172 Gas
Head Gasket 134/172 Gas
- Head Gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Item #: 155277, Ref: EAF6051D) $27.10

No
Picture
Lower Gasket Set
- Used on 134 CID and 172 CID gas or diesel engines. For tractor models NAA, Jubilee, 500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106345, Ref: CS3477) $68.00

Ford 840 Main Bearing Cap Packing Material, V-Style
Main Bearing Cap Packing Material, V-Style
- For 134 and 173 CID Engines, 1953 to 1964. Sold individually. (Item #: 172567, Ref: B3NN6336A) $3.00

Ford 840 Oil Filter Inlet Tube Cover Gasket
Oil Filter Inlet Tube Cover Gasket
- For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number B9NN6A628A, Oil filter inlet tube cover gasket, (Item #: 160106) $1.30

Ford 840 Oil Inlet Tube Seal
Oil Inlet Tube Seal
- This part replaces Ford/ New Holland numbers 500391 and EAA6594A. It is used on Ford 4 cylinder tractors, 1953-1964. Models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 (Item #: 155434) $0.60

Ford 840 Oil Pan Gasket
Oil Pan Gasket
- Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 106281, Ref: EAF6710B) $7.80

Ford 840 Oil Pump Inlet Tube Flange Cover Gasket
Oil Pump Inlet Tube Flange Cover Gasket
- For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6626C, Inlet tube flange cover gasket, (Item #: 160105) $1.90

Ford 840 Oil Pump to Block Gasket
Oil Pump to Block Gasket
- For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000 (all gas), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Replaces Ford OEM number EAA6659A, Oil pump to block gasket, (Item #: 160104) $1.40

Ford 840 Overhaul Gasket Set, 172 Gas
Overhaul Gasket Set, 172 Gas
- For 800, 900, 801, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket kit for engine heads that use 7/16 inch head bolts. Includes crankshaft seals. (Item #: 106276, Ref: FPN6008B) $85.00

Ford 840 Overhaul Gasket Set, 172 Gas
Overhaul Gasket Set, 172 Gas
- For tractor models: 800, 801, 900, 901; 172 CID Gas 1958 and up, 4000 to 1964. Overhaul Gasket Kit for engine heads that use 1/2 inch head bolts. Includes with crankshaft seals.FPN6008B1 (Item #: 106276, Ref: CPN6008H1) $85.00

Ford 840 Overhaul Gasket Set Less Head Gasket 134\172 Gas
Overhaul Gasket Set Less Head Gasket 134/172 Gas
- Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Item #: 182454, Ref: CPN-FPN) $68.00

Ford 840 Push Rod Side Cover Gasket
Push Rod Side Cover Gasket
- For all 4 cylinder gas or diesel models built between 1953-1964. (Item #: 165426, Ref: EAF6521D) $6.20

Ford 840 Pushrod Side Cover Grommet
Pushrod Side Cover Grommet
- Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Item #: 165425, Ref: C0NN6589A) $1.80

Ford 840 Seal
Seal
- Hydraulic Pump Shaft Oil Seal. Inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For 2000, 4000, 600, 700, 800, 900, NAA. C5NN851A (Item #: 117609, Ref: NCA851A) $6.50

Ford 840 Timing Gear Front Cover Gasket
Timing Gear Front Cover Gasket
- For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Item #: 172791, Ref: EAF6020B) $2.20

Ford 840 Upper Gasket Set, 172 Gas
Upper Gasket Set, 172 Gas
- For tractor models 800, 801, 900, 901, 4000; 172 CID gas 1963 to 1964. Overhaul Gasket Kit with 1/2 inch head bolts. (Item #: 106302, Ref: VGFPN1) $75.00

Ford 840 Upper Gasket Set, 172 Gas
Upper Gasket Set, 172 Gas
- Upper Engine Gasket Kit. Kit includes EAF6051D, EAF6584C, C0NN9448C. For tractor models 800, 900, 801, 901, 4000 1963 to 1964 with 7/16 inch head bolts. (Item #: 106302, Ref: VGFPN) $75.00

Ford 840 Valve Cover Stud Grommet
Valve Cover Stud Grommet
- This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Item #: 178199, Ref: EAF6570A) $4.70

Ford 840 Valve Cover Vent Breather Gasket
Valve Cover Vent Breather Gasket
- This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Item #: 172956, Ref: EAF6863C) $1.80

Ford 840 Valve rocker arm cover gasket.
Valve rocker arm cover gasket.
- Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Item #: 128766, Ref: EAF6584C) $11.10

Engine Rebuild Kits
Ford 840 Basic In Frame Overhaul Kit, 172 Gas, Overbore with Metal Head Gasket
Basic In Frame Overhaul Kit, 172 Gas, Overbore with Metal Head Gasket
- For tractor models 800, 900, 801, 901, (4000 1963-1964) with 172 inch CID 4 cylinder gas engine with a standard bore of 3.9 inch. Contains Super power set overbore to 4.0 inch, PK109 sleeve and piston kit with rings, pins and retainers, upper gasket set, and oil pan gasket. (Item #: 189562, Ref: BIFF109M) $908.00

Ford 840 Basic In Frame Overhaul Kit, 172 Gas, with Metal Head Gasket
Basic In Frame Overhaul Kit, 172 Gas, with Metal Head Gasket
- 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains head gasket with upper gasket set, sleeves, pistons, rings, pins and retainers, oil pan gasket. Bearings are available, must order separately. For tractor models 4000 (1963 to 1964), 800, 801, 900, 901. (Item #: 189416, Ref: BIFF115AM) $474.00

Ford 840 Basic In Frame Overhaul Kit, 172 Gas, with Non Metal Head Gasket
Basic In Frame Overhaul Kit, 172 Gas, with Non Metal Head Gasket
- 172 CID 4 cylinder gas 3.9 inch standard bore. Kit contains, sleeves, pistons, rings, pins and retainers, NON-METAL head gasket with upper gasket kit, oil pan gasket. Bearings are available, must be ordered separately. For tractor models 4000 (1963-1964), 800, 801, 900, 901. (Item #: 184710, Ref: BIFF115A) $476.00

Ford 840 Basic Overhaul Kit
Basic Overhaul Kit
- 172 CID 4 cylinder gas 3.9 inch standard bore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket set. less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 183988, Ref: BEKF115A-LCB) $440.00

Ford 840 Basic Overhaul Kit, 172 Gas, Overbore
Basic Overhaul Kit, 172 Gas, Overbore
- 172 CID 4 cylinder gas 4.0 inch overbore. Basic engine kit contains, sleeves, pistons, rings, pins and retainers, pin bushings, complete gasket kit, Less bearings. Engine bearings must be ordered separately. For 4000 (1963-1964), 801, 901, 800, 900. (Item #: 130780, Ref: BEKF109-LCB) $390.00

Ford 840 Engine Overhaul Kit with New Crankshaft
Engine Overhaul Kit with New Crankshaft
- Comprehensive Kit For tractor models (1955 to 1964) 800, 900, 801, 901, 4000 up to 1964 with the 172 cu. inch Gas Engine 3.9" bore. Includes - Pistons, Wrist Pin Bushes, Piston Rings, Liners, Con Rod Bearings, Top and Bottom Gasket Sets PLUS - Main Bearings, Thrust Washers, Front and Rear Seals. Kit INCLUDES NEW CRANKSHAFT. (Item #: 183678, Ref: EKMC125) $1609.01

No
Picture
Engine Rebuild Kit - Less Bearings - 1955-1957, 172
- For Ford tractor models 800, 820, 840, 850, 860, 900, 950, 960 (all 1955-1957), Compatible with Ford Engine (s) 172 (gas), Bore: 4.000", Stroke: 3.600", .912" piston pin diameter, Early press fit liners can be bored up to .040" oversize, Models 1955-1957, Sleeved block, Kit includes: Pistons, Piston Ring Set, Liners and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130955) $362.00

Ford 840 Engine Rebuild Kit - Less Bearings - 1962-1972, 172
Engine Rebuild Kit - Less Bearings - 1962-1972, 172
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, and Gasket set with Crank Seals, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130783) $460.00

Ford 840 Engine Rebuild Kit with Valve Train - Less Bearings - 1962-1972, 172
Engine Rebuild Kit with Valve Train - Less Bearings - 1962-1972, 172
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000 (all 1962-1972), Compatible with Ford Engine (s) 172 (diesel), Bore: 3.901", Stroke: 3.600", 1.249" piston pin diameter, Models 1962-1972, Sleeveless block, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106271, (Item #: 130810) $614.00

Ford 840 Overhaul Kit, 172 Diesel
Overhaul Kit, 172 Diesel
- Complete Overhaul Kit For 800, 900, 4000 With 172 inch Diesel Engine with 5-ring pistons. Contains sleeve and piston kit, complete gasket set, connecting rod bushings and bearings, center, front and rear main bearings, intake and exhaust valves (plus guides, locks and springs). Available with Std., .001 inch, .002 inch, .010 inch, .020 inch or .030 inch bearings. (Item #: 184770, Ref: 172DK) $1329.01

Ford 840 Overhaul Kit, 172 Gas
Overhaul Kit, 172 Gas
- Overhaul kit for 800, 801, 900, 901, 4000 (1955-1964). With 4-cylinder 172 gas engine with 3-ring pistons. Contains sleeve and piston kit (sleeves, pistons, pins, retainers, top chrome and oil control ring set). Basic gasket set. Intake and exhaust valves (plus guides, locks and springs). Bearings sold separately. (Item #: 130811, Ref: EOK115-LCB) $500.00

Ford 840 Piston - .020 inch Oversize
Piston - .020" Oversize
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Engine (s) 172 (gas), .020" Oversize, Standard Bore: 3.901", Piston only, (Item #: 108668) $63.00

No
Picture
Rebore Kit, 172 Gas
- 3.90 inch .020 oversize. For tractor models 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3337) $212.31

No
Picture
Rebore Kit, 172 Gas, STD
- 3.900 inch bore. For 800, 900, 4000 with 172 gas, non-sleeved engine. (Item #: R3336) $253.71

Ford 840 Valve Service Kit
Valve Service Kit
- For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Item #: 178669, Ref: VSKF134G) $85.00

Ford 840 Valve Train Kit, 134 CID Gas
Valve Train Kit, 134 CID Gas
- For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Item #: 108790, Ref: VOKF134G) $113.00

Ford 840 Valve Train Kit, 172 CID Gas
Valve Train Kit, 172 CID Gas
- For 172 CID 4 cylinder gas engines. Kit comes with 4 intake valves, 4 exhaust valves, 8 valve guides, 8 valve springs, 8 valve keys, 8 valve locks. Models: 2000 <1964, 4000 1962-1964, (500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840 all 1955-1957), (801, 811, 821, 841, 851, 861, 871, 881 all 1958-1962), (900, 950, 960 all 1955-1957), (901, 941, 951, 961, 971, 981 all 1958-1962). (Item #: 108790, Ref: VOKF134G) $113.00

Engine Parts
No
Picture
2nd Speed Mainshaft Gear, Used
- For Ford tractor models NAA, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2120, 2130, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 7530, Compatible with Ford Construction and industrial models 2030, 3550, 4040, Replaces Ford OEM number B9NN7A381B, Replaces Ford Casting nos 8N7101B, 8N7114B, Teeth: 56, Splines: 17, 3 and 4 Cylinder Tractors with 4 Speed Transmission, For a new version of this item use Item #: 108536, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435402) $72.01

No
Picture
Bare Block, Remanufactured, C0NN6015C, D3JL6015J
- For Ford tractor model 800, Replaces Ford Casting number C0NN6015C, D3JL6015J, Casting number (s): C0NN6015C, D3JL6015J, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204910) $930.01

No
Picture
Bare Block, Remanufactured, EAF6015F
- For Ford tractor models 800, 900, 4000, Replaces Ford Casting number EAF6015F, EAF6015H, EAF6015J, Casting number (s): EAF6015F, EAF6015H, EAF6015J, Engine: 172, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204927) $1050.01

Ford 840 Camshaft
Camshaft
- Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Item #: 160917, Ref: C0NN6251A) $233.00

No
Picture
Camshaft Gear, Used
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, 4140, Replaces Ford OEM number EAF6256M, Crankshaft Teeth: 21, Camshaft Teeth: 42, Camshaft I.D. 1.0", For a new version of this item use Item #: 121561, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435994) $26.91

Ford 840 Camshaft Hydraulic Pump Drive Gear
Camshaft Hydraulic Pump Drive Gear
- For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Item #: 123501, Ref: EAF907B) $72.00

Ford 840 Camshaft Kit, Camshaft and Lifters
Camshaft Kit, Camshaft and Lifters
- Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Item #: 184418, Ref: 734145) $395.00

Ford 840 Camshaft Timing Gear, STD
Camshaft Timing Gear, STD
- Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Item #: 121561, Ref: EAF6256M) $57.00

Ford 840 Connecting Rod Nut
Connecting Rod Nut
- This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref: 7HA-6212) $1.60

Ford 840 Connecting Rod Nut
Connecting Rod Nut
- For Ford tractor models NAA, 2N, 8N, 9N, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000, Replaces Ford OEM number FC9AZ6212B, 70207132, C9AZ6212B, For OEM Quality use Item #: 183734, (Item #: 182466) $1.10

Ford 840 Connecting Rod, Used
Connecting Rod, Used
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000, Compatible with Ford Engine(s) 134, 172 Replaces Ford OEM nos 86618939, , Compatible with New Holland tractor models 2030, Compatible with New Holland Skid Steer Loader(s) L778, Replaces New Holland OEM nos 86618939, Replaces Casting nos EAA6205A, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431257) $71.01

No
Picture
Counter Shaft, Used
- For Ford tractor models 501, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 820, 821, 840, 841, 900, 901, 941, 2000 (3 cylinder), 2000 (4 cylinder), 2031, 2100, 2110, 2111, 2131, 2300, 2310, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 4000 (3 cylinder), 4000 (4 cylinder), 4030 (3 cylinder), 4031, 4100, 4110, 4120, 4121, 4130 (3 cylinder), 4131, 4140, 4330, 4340, Compatible with Ford Construction and industrial models 340A, 540A, 540B (All 4 cylinder), 1801, 1821, 1841, 2030, 3550, 4040, 4400, 4500, Replaces Ford OEM number C5NN7N109A, NDA7111C, Spline: 16 and 15, Teeth: 15 and 18 and 23, Long: 12.875", For a new version of this item use Item #: 126176, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435993) $101.01

Ford 840 Crankshaft, 4cyl Gas
Crankshaft, 4cyl Gas
- Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Item #: 185237, Ref: D1NL6303D) $732.65

Ford 840 Crankshaft Gear
Crankshaft Gear
- This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Item #: 121563, Ref: EAF6306B) $60.00

Ford 840 Crankshaft Pulley
Crankshaft Pulley
- Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Item #: 169121, Ref: C0NN6351A) $96.00

Ford 840 Crankshaft, Remanufactured, B9NN6303B
Crankshaft, Remanufactured, B9NN6303B
- For Ford tractor models 800, 900, Compatible with Ford Engine (s) 172 (diesel), Replaces Casting number B9NN6303B, B9NN6302B, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200171) $514.01

No
Picture
Crankshaft, Remanufactured, C0NN6303C, 310372
- For Ford tractor models NAA, 600, 700, 800, 900, 2000, 4000, Compatible with Ford Engine (s) 134 (gas), 172 (gas), Replaces Casting number C0NN6303C, 310372, D1NL6303A, EAF6303, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200170) $550.01

Ford 840 Cylinder Head
Cylinder Head
- For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For tractor models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Includes Guides and Seats. Does not include valves, or springs. Replaces D3JL6049B, 310098, 310100. Replaces Casting nos EAE6085E, 310098, 310100, D1NL6049D, D1NL6090D, EAE6090F, EAF6090F, EAF6090H (Item #: 121813, Ref: D3JL6049B) $855.00

No
Picture
Cylinder Head, Remanufactured, B9NN6090A
- For Ford tractor models 800, 900, Replaces Ford Casting number B9NN6090A, 310665, C0NN6090E, D3JL6090G, E1E6050, Engine: 172D, Casting No. B9NN6090A, D3JL6090G, 310665, E1E6050, C0NN6090E, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, Cleaned and tested for cracks, (Item #: 203914) $1050.01

No
Picture
Cylinder Head, Remanufactured, D1NL6049D
- For Ford tractor models 800, 900, 4000 (Gas), Replaces Ford Casting number D1NL6049D, 310100, D1NL6090D, EAF6090H, Engines 172, Cylinders: 4, 1/2" head bolts, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, For a New version of this sku use Item #: 121813, (Item #: 205484) $800.01

No
Picture
Cylinder Head, Used
- For Ford tractor models 800, 900, Replaces Ford Casting number 310665, B9NN6090A, C0NN6090E, D3JL6090G, E1E6050, Engine: 172D, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 203914, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403914) $321.01

No
Picture
Cylinder Head, Used
- For Ford tractor models 800, 900, 4000 (Gas EAF), Replaces Ford Casting number 310100, EAF6090F, EAF6090H, Engine(s): 172, Cylinders: 4, 7/16" head bolts, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 310263, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400131) $475.01

Ford 840 Cylinder Head, Used
Cylinder Head, Used
- For Ford tractor models 800, 900, 4000 (Gas), Replaces Ford Casting number 310100, D1NL6090D, D1NL6049D, EAF6090H, Engine(s): 172, Cylinders: 4, 1/2" head bolts, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a new version of this item use Item #: 205484, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405484) $385.01

Ford 840 Flywheel Bolt Kit
Flywheel Bolt Kit
- From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref: 350645S) $28.30

Ford 840 Governor Assembly
Governor Assembly
- This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Item #: 115381, Ref: EAF12470A) $104.00

Ford 840 Governor Ball
Governor Ball
- These are 3/4 Inch Governor Balls used in production 1952-1958. Later style governors did not use these, and many older tractors have upgraded governors without ball bearings. Replaces part numbers 86624946, 8NNN18229 (Item #: 178188, Ref: 8NNN18229) $0.90

Ford 840 Governor Compensating Spring
Governor Compensating Spring
- Mounts between Bellcrank and under battery tray, 6.535 inch overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Item #: 178181, Ref: NCA9827A) $8.00

Ford 840 Governor Compensator Spring Assembly
Governor Compensator Spring Assembly
- 3 Pieces. Replaces NCA99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas. For 501 thru 4140 4 cylinder gas and LP 1958-1964 with engine serial number 26402 and up. (Item #: 116123, Ref: NCA99810A) $19.20

Ford 840 Governor Shaft Oil Seal
Governor Shaft Oil Seal
- Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Item #: 178055, Ref: EAF18183B) $8.70

Ford 840 Lifter
Lifter
- Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Item #: 160900, Ref: F3JL6500AA) $11.50

Ford 840 Main Shaft Gear, Used
Main Shaft Gear, Used
- For Ford tractor models NAA, 8N, 541, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, Compatible with Ford Construction and industrial models 1801, 1821, 1841, 2030, 4040, 4140, Replaces Ford OEM nos 8N7110, 4th Gear, Teeth: 39, Splines: 17, Inside Diameter: 1.783", Outside Diameter: 5.119", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436813) $117.01

Ford 840 Push Rod, 5\16 Diameter
Push Rod, 5/16 Diameter
- If replacing 1/4 inch outside diameter push rod (early 134 engines), you must also use part number 131473 rocker adjusting screw, and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5/16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Item #: 182481, Ref: 500356) $11.70

Ford 840 Ring Gear, Flywheel
Ring Gear, Flywheel
- Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 beveled teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Item #: 110232, Ref: 9N6384) $26.00

Ford 840 Rocker Arm Screw
Rocker Arm Screw
- Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473) $40.20

Ford 840 Tappet
Tappet
- For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Item #: 160900, Ref: EAA6500D) $11.50

Ford 840 Timing Gear Set
Timing Gear Set
- Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Item #: 149997, Ref: EAF6256MSTD) $155.00

Ford 840 Valve, Exhaust
Valve, Exhaust
- Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.30

Ford 840 Valve, Exhaust
Valve, Exhaust
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 172539, Ref: EAF6505D) $11.30

Ford 840 Valve, Exhaust, 172 CID Gas
Valve, Exhaust, 172 CID Gas
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172539, Ref: EAF6505D) $11.30

Ford 840 Valve, Intake
Valve, Intake
- Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Item #: 172846, Ref: EBU6507A) $8.00

Ford 840 Valve Key, Intake and Exhaust, 1\2
Valve Key, Intake and Exhaust, 1/2
- Sold per 1/2 valve, order 2 per valve. 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine. Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Item #: 107088, Ref: 7HA6518) $0.60

Ford 840 Valve Spring
Valve Spring
- Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Item #: 173016, Ref: EAA6513A) $2.50

Ford 840 Valve Stem Cap, Exhaust
Valve Stem Cap, Exhaust
- This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Item #: 168344, Ref: 8EQ6550A) $3.40

Engine Pistons and Sleeves
Ford 840 Cylinder Kit - 4.000
Cylinder Kit - 4.000
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000 (series), Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (4 cylinder gas, 1955-1961, 3.901" standard bore), Compatible with New Holland Hay Cutting (s) 907, 909, 4.000" Overbore Cylinder Kit, Includes: Piston and Rings, Liner, Pin and Retainers, For 3.901" standard bore cylinder kit use Item #: 161138, (Item #: 161137) $75.00

No
Picture
Piston, .020 Overbore, 172 CID Gas Engine
- Overbore .020 3-Ring Piston (rings NOT included) with Pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas engine (1953-1964) on: 800, 801, 900, 901, 4000. Price is for one piston. (Item #: 184929, Ref: EAF6108G) $47.90

No
Picture
Piston, .030 Overbore, 172 CID Gas Engine
- Overbore .030 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185436, Ref: EAF6108H) $52.00

No
Picture
Piston, .040 Overbore, 172 CID Gas Engine
- Overbore .040 3-Ring Piston (Rings NOT included) with Pin and Locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For 172 CID 4-Cylinder Gas Engine (1953-1964) on: 800, 801, 900, 901, 4000. (Item #: 185551, Ref: EAF6108J) $51.57

No
Picture
Piston and Sleeve Kit 172 Gas
- Kit, Press-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.1 inch outside diameter. (Item #: 185075, Ref: FPN6055A) $415.00

No
Picture
Piston and Sleeve Kit 172 Gas
- Kit, Drop-In Sleeves, Pistons and Rings for one engine. For 4000, 800, 801, 900, 901. All with 3.9 inch bore. Has 4.098 inch outside diameter. (Item #: 161138, Ref: FPN6055B) $192.00

Ford 840 Piston Sleeve, 172 Gas
Piston Sleeve, 172 Gas
- Used on 172 Gas engines with 4.0 inch bore (3.90 is standard). Used 1954-1964 when 4.0 overbore pistons have been installed. (Item #: 184425, Ref: EAF6055D4) $35.10

Ford 840 Piston Sleeve, 172 Gas or Diesel Engine
Piston Sleeve, 172 Gas or Diesel Engine
- Standard Sleeve with 3.9 inch bore, (4.1 inch outside diameter, press fit) for 172 CID gas or diesel engines on: 800, 801, 900, 901, 4000. (Item #: 172912, Ref: EAF6055D) $41.80

No
Picture
Piston, Standard, 172 CID Gas Engine
- Standard 3-Ring Piston, 3.9 inch bore, (Rings NOT included) with Pin and Locks. For 172 CID 4-Cylinder Gas Engine on: 800, 801, 900, 901, 4000 (1953 to 1964). (Item #: 184427, Ref: EAF6108F) $48.80

Ford 840 Sleeve and Piston Kit, 172 Gas, STD
Sleeve and Piston Kit, 172 Gas, STD
- Sleeve and Piston Kit for models 800, 801, 900, 901, 4000, Jubilee. All with 172 CID Gas, 4 Cylinder (1955-1964). Standard bore. For 4000 (1962-1964) that were sleeveless require block be bored. Sleeve and Piston Kit contains: pistons, sleeves, piston pins, retainers and chrome top and chrome steel rail oil control rings. (Item #: 190153, Ref: PK15G1) $485.00

No
Picture
Sleeve, STD, 172 CID Gas
- Standard sleeve. For tractor models 4000, 800, 801, 900, 901. All with 3.9 inch bore, 4.098 inch outside diameter drop-in. Prefinished. (Item #: 172912, Ref: B3NN6055B) $41.80

Engine Rings
No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as a complete 4 cylinder set, For single cylinder set use Item #: 150187, (Item #: 150186) $98.00

No
Picture
Piston Ring Set - .020" Oversize - 4 Cylinder Set
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - .020" Oversize - Single Cylinder use Item #: 120775, (Item #: 174347) $101.00

Ford 840 Piston Ring Set - .020 inch Oversize - Single Cylinder
Piston Ring Set - .020" Oversize - Single Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555849, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120778, (Item #: 108669) $29.70

Ford 840 Piston Ring Set - .020 inch Oversize - Single Cylinder
Piston Ring Set - .020" Oversize - Single Cylinder
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86555842, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .020" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .020" Oversize - 4 Cylinder use Item #: 120776, (Item #: 120775) $26.70

Ford 840 Piston Ring Set - .030 inch Oversize - Single Cylinder
Piston Ring Set - .030" Oversize - Single Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number 86555848, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .030" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 150189, (Item #: 120777) $32.10

No
Picture
Piston Ring Set - .040" Oversize - 4 Cylinder Set
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold as 4 Cylinder Piston Ring Set, For .040" Oversize Single Cylinder Piston Ring Set use Item #: 120776, (Item #: 174341) $201.00

Ford 840 Piston Ring Set - .040 inch Oversize - Single Cylinder
Piston Ring Set - .040" Oversize - Single Cylinder
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539371, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901", Ring Size: .040" Oversize, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120775, (Item #: 120776) $53.00

Ford 840 Piston Ring Set - .040 inch Oversize - Single Cylinder
Piston Ring Set - .040" Oversize - Single Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas) Replaces Ford OEM number FPN6149J, , Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .040" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - .040" Oversize - 4 Cylinder use Item #: 120777, (Item #: 120778) $35.20

Ford 840 Piston Ring Set - .060 inch Oversize - 4 Cylinder
Piston Ring Set - .060" Oversize - 4 Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Standard Bore: 3.901”, Ring Size: .060" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, For standard use Item #: 150190, (Item #: 120779) $107.00

Ford 840 Piston Ring Set - 4.000 inch Overbore - 4 Cylinder
Piston Ring Set - 4.000" Overbore - 4 Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas), Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, (Item #: 129003) $137.00

Ford 840 Piston Ring Set - 4.000 inch Overbore - Single Cylinder
Piston Ring Set - 4.000" Overbore - Single Cylinder
- For Ford tractor models 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (gas, 3.901" standard bore) Replaces Ford OEM number AF6149A, , Compatible with New Holland Hay Cutting (s) 907, 909, Overbore: 4.000", Compression Rings per Piston: (1) @ .078" and (1) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .078", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, Piston Ring Set - 4.000" Overbore - 4 Cylinder use Item #: 174353, (Item #: 120781) $15.10

No
Picture
Piston Ring Set, Gas
- Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with 2 compression at 3/32 and 1 oil. (Item #: 174337, Ref: 2C7673) $107.00

No
Picture
Piston Ring Set, Gas, .020 Over
- Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with .020 inch overbore with 2 compression at 3/32 inch and 1 oil at 3/16. (Item #: 174350, Ref: 2C7673.020) $111.00

No
Picture
Piston Ring Set, Gas, .030, Chrome
- Overbore .030 (Standard bore is 3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch (top is Chrome), and steel rail oil ring at 3/16 inch. Complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 150189, Ref: EAF6149B) $33.10

No
Picture
Piston Ring Set, Gas, .040 Over
- Complete set for 1 engine. 4 Cylinder Gas 3.9 inch bore with .040 overbore with 2 compression at 3/32 and 1 oil ring at 3/16. (Item #: 174355, Ref: 2C7673.040) $134.00

No
Picture
Piston Ring Set, Gas, 4 Inch Overbore
- For tractor models 800, 801, 900, 901, 4000. All 1953-1964 with 172 gas. 3.9 inch bore engines. This ring set is for 4 inch overbore, with 2 compression rings at 5/64 inch, 3/32 inch and oil at 3/16 inch. (Item #: 174353, Ref: PRS109) $76.00

Ford 840 Piston Ring Set - Standard - Single Cylinder
Piston Ring Set - Standard - Single Cylinder
- For Ford tractor models 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 951, 961, 971, 981, 4000, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, Compatible with Ford Engine (s) 172 (diesel) Replaces Ford OEM number 86539364, , Compatible with New Holland Hay Cutting (s) 907, 909, Bore: 3.901", Ring Size: Standard, Compression Rings per Piston: (3) @ .094", Oil Rings per Piston: (2) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094”, 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Cast Iron Oil / Inner Spring, 5th Groove Size: .188", 5th Groove Style: Cast Iron Oil, Sold per cylinder, Piston Ring Set - Standard - 4 Cylinder use Item #: 120776, (Item #: 120774) $28.00

Ford 840 Piston Rings, Gas
Piston Rings, Gas
- For one Piston. Standard bore (3.9 inch) 3-Ring Set. Set uses 2 compression rings at 3/32 inch, and Steel rail oil ring at 3/16 inch. Order 4 for a complete set for 172 CID Gas on models (1955 to 1964): 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 4000. (Item #: 108791, Ref: EAF6149A) $28.80

Exhaust System
Ford 840 Elbow to Exhaust Manifold Gasket
Elbow to Exhaust Manifold Gasket
- For 172 CID gas engines 1958-1964 on Models: 800, 801, 900, 901, 4000. Use with elbow 310075 and muffler 310079. Priced each. (Item #: 121816, Ref: 310074) $2.30

Ford 840 Exhaust Elbow, Vertical
Exhaust Elbow, Vertical
- Constructed like the original, this elbow is for above the hood, vertical exhaust. It is used on Ford tractors with 134 gas, and some early Ford tractors with 172 gas. It is for systems using an elbow coming off the manifold that is 1-5/8 OD. (Item #: 183775, Ref: NAA55258A) $84.00

Ford 840 Exhaust Elbow With Gasket
Exhaust Elbow With Gasket
- Outlet is 1 5/8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801, NAA. All with 134 or 172 CID engine. Replaces NAA55250B (Item #: 185223, Ref: NAA55250BWG) $35.60

Ford 840 Exhaust Manifold Elbow
Exhaust Manifold Elbow
- For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 946, 950, 951, 960, 961, 971, 981, 2000, Replaces Ford OEM number NAA55250B, 1-5/8" O.D., (Item #: 101518) $25.10

Ford 840 Exhaust Manifold Elbow - Gasket
Exhaust Manifold Elbow - Gasket
- Fits 134 CID Gas Engines 1953 to 1964 on models: NAA, 600, 601, 700, 701. 172 CID Gas Engines 1955 to 1957 on models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Item #: 121815, Ref: NAA55232A) $1.90

Ford 840 Exhaust Pipe, Curved
Exhaust Pipe, Curved
- Outlet pipe, horizontal, curved section. Outlet 1-1/2 inch outside diameter. For 134 CID gas engines. Tractors: 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771. 172 and 134 CID gas engines. Tractors: 800, 820, 840, 850, 860 (1955 to 1962), 900, 950, 960, 2000 (4 cylinder 1963 to 1964). Does not include row crop tractors. (Item #: 114744, Ref: NCA5255B) $26.20

Ford 840 Exhaust Pipe, Horizontal
Exhaust Pipe, Horizontal
- Outlet pipe extension, rear straight section. For: NAA, 2000 (1963-1964), 501, 600, 601, (1958-1962 with 134 gas engine), 700, 701 (1958-1962 with 134 gas engine), 800 (1955-1957 with 172 gas engine). Dimensions: Inlet inside diameter 1-1/2 inch, length 54 inch, outlet outside diameter 1-1/2 inch. (Item #: 115438, Ref: NCA5263B) $32.90

Ford 840 Exhaust Pipe, Horizontal
Exhaust Pipe, Horizontal
- This is a single piece exhaust pipe used from muffler to tailpipe. It replaces NCA5255B and NCA5263B as a single pipe. 1 1/2 inch inlet inside diameter, 1 1/2 inch outlet outside diameter, 78 inch overall length. For a less expensive shipping option, order the two piece version, 127308. (Item #: 184825, Ref: R1613) $33.50

Ford 840 Exhaust Pipe, Horizontal, 2 Piece
Exhaust Pipe, Horizontal, 2 Piece
- Fits NAA, Jubilee, 1953-1954 with 4 speed trans. Used from muffler to tailpipe, Contains NCA5255B and NCA5263B. Can also order R1613 as a 1 piece unit. (Item #: 127308, Ref: NAA5255D) $57.00

Ford 840 Extension Pipe
Extension Pipe
- Vertical Two-Piece Exhaust Pipe with Clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5/8 inch inside diameter, outlet 1-3/4 inch outside diameter. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Item #: 115465, Ref: M105) $54.00

Ford 840 Extension Pipe, Curved
Extension Pipe, Curved
- Outlet Pipe, curved section. Not for row crop or grove. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). (Item #: 115454, Ref: 311051) $32.70

Ford 840 Extension Pipe, Straight
Extension Pipe, Straight
- Outlet Pipe Extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). Not for row crop, grove, select-o-speed. (Item #: 115475, Ref: 311050) $30.10

Ford 840 Intake and Exhaust Manifold Gasket, Diesel
Intake and Exhaust Manifold Gasket, Diesel
- For 172 CID diesel engine Models: 800, 801, 900, 901, 4000. All 1958-1964. Pack of 4. (Item #: 185549, Ref: 310658) $9.80

Ford 840 Intake and Exhaust Manifold Gasket Set
Intake and Exhaust Manifold Gasket Set
- For Gas Engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Contains two manifold gaskets, two different size carburetor to manifold gaskets, and elbow gasket. Replaces NAA55232A, 87018642, C0NN9448C (Item #: 101517, Ref: C0NN9448C) $6.80

Ford 840 Manifold, Gas
Manifold, Gas
- Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Order the gaskets (C0NN9448C) separately. (Item #: 101516, Ref: TFM9425WG) $102.00

Ford 840 Manifold Nut and Washer Kit
Manifold Nut and Washer Kit
- This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Item #: 153429, Ref: 33817-KIT) $9.00

Ford 840 Muffler
Muffler
- For Ford tractor models NAA, 501, 600, 700, 800, 900, 2000, 4000, Replaces OEM number FO12, AFD1210, FO-12, Inlet Inside Diameter: 1 5/8", Outlet Outside Diameter: 1 3/4", (Item #: 100580) $74.00

Ford 840 Muffler and Pipe Assembly, Vertical
Muffler and Pipe Assembly, Vertical
- For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-1964. For the following 172 CID gas tractors: 800, 900, ALL 1955-1957 and the 4-cylinder 4000 series 1958-1964. This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5/8 inch inside diameter (verify that you have a 1 5/8 inch exhaust elbow), outlet 1-3/4 inch outside diameter. The order of this exhaust system is exhaust elbow (not included) exhaust pipe, then muffler above the hood. (Item #: 100580, Ref: M103) $74.00

Ford 840 Muffler Heat Shield
Muffler Heat Shield
- This is Muffler Heat Shield is exactly like the original. It is used on Ford Tractors with 134, 172 and 192 4-cylinder gas and diesel engines, 1953 - 1964. It is 25-3/4 inch long. Has a red powder coat finish. Replaces original part number NCA5290A (Item #: 153378, Ref: NCA5290A) $51.00

Ford 840 Muffler, Horizontal
Muffler, Horizontal
- For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4 inch, inlet tube 1-5/8 inch ID, shell length 13 inch, shell diameter 3-1/4 inch, outlet tube length 2-1/4 inch, outlet tube outside diameter 1-5/8 inch OD, muffler overall length 17-1/2 inch. (Item #: 100570, Ref: NAA5230E) $22.00

Ford 840 Vertical Exhaust Assembly
Vertical Exhaust Assembly
- For tractor models: Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier). All with gas engines. Two piece assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3/4 Inch OUTLET DIAMETER, 1 5/8 Inch INLET DIAMETER. (Item #: 115465, Ref: FDE170) $54.00

Ford 840 Vertical Exhaust Kit
Vertical Exhaust Kit
- Constructed like the original equipment, this kit features Cast Steel Vertical Exhaust Support Elbow, Extension Pipe and Clamp. It is used on Ford 4 Cylinder tractors 1953-1964, 134 and 172 gas, when the manifold elbow is 1-5/8 inch OD. Replaces NAA55237A (Item #: 167349, Ref: NAA55237AOE) $130.00

Ford 840 Vertical Exhaust Pipe
Vertical Exhaust Pipe
- This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1-3/8 inch I.D., outlet 1-1/2 inch. It is for gas models NAA, 500, 501, 600, 700, (4 cylinder 2000 and 4000 1953 to 1964), 800, 900. All with the 134 and 172 cubic inch engines. (Item #: 111035, Ref: NAA55237A) $40.00

Ford 840 Vertical Muffler and Pipe Assembly
Vertical Muffler and Pipe Assembly
- For tractor models 1964 and earlier 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11/16 inch inlet and 1 3/4 inch outlet. This is one piece welded construction. FO-21 (Item #: 100579, Ref: FD2110) $116.00

Fuel System / Air Intake
Ford 840 Air Cleaner Assembly
Air Cleaner Assembly
- For tractor models 700, 740, 750, 800, 820, 840, 900, 950, 960. Restoration Quality Air Cleaner Assembly. Includes cup. Also Replaces 312918. (Item #: 182798, Ref: C7NN9600J) $130.18

Ford 840 Air Cleaner Clamp
Air Cleaner Clamp
- Air cleaner oil cup clamp 4 1/2 inches. For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Item #: 111916, Ref: 311508) $14.30

Ford 840 Air Cleaner Clip
Air Cleaner Clip
- For tractor models NAA, Jubilee, 600, 700, 800, 900. Not exactly like original, works the same. (Item #: 167409, Ref: 9N9678) $5.00

Ford 840 Air Cleaner Cup
Air Cleaner Cup
- This new air cleaner oil cup measures 5 inches outside diameter at the lip and is 3-1/8 inches tall. This cup is used for the clip type air cleaner (not the clamp type). Please measure your cup prior to ordering. Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B available separately. On the 800 and 900 series tractors, it is serviceable. It will look different but fit fine. Replaces: 8N9658, 8N9658C, Serviceable for: B9NN9658A. (Item #: 179783, Ref: S.61648) $28.80

Ford 840 Air Cleaner Cup
Air Cleaner Cup
- For tractor models NAA, Jubilee, 600, 700, 800, 900. 4 7/8 inch diameter, 3 5/8 depth. Replaces OEM # B5NN9658A. (Item #: 178104, Ref: S.60583) $28.40

Ford 840 Air Cleaner Cup Gasket
Air Cleaner Cup Gasket
- For air cleaners with toggle clamps on side of air cleaner (14-3/4 inches long). Use with Air Cleaner Cup S.61648 and S.60583. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Item #: 111390, Ref: 9N9623B) $6.20

Ford 840 Air Cleaner Funnel Screen
Air Cleaner Funnel Screen
- Air Cleaner Funnel Screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964). TIS (Item #: 126374, Ref: NAA9669A) $5.00

Ford 840 Air Cleaner Grille Door with Screen and Thumb Screw
Air Cleaner Grille Door with Screen and Thumb Screw
- For Ford tractor models NAA, 501, 540, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1800, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number NAA9661B, NAA9669A, Includes: Air cleaner grille door, screen and thumb screw, (Item #: 126375) $23.20

Ford 840 Air Cleaner Hose
Air Cleaner Hose
- Rubber air cleaner to carburetor hose is not like original metal tube. VERIFY THE INSIDE DIAMETER AT 1.5 Inches, 18 inches in length (20.5 inches following the curves). For tractor models using 134/172 gas engine: 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000. (Item #: 173789, Ref: 311112) $39.00

No
Picture
Air Cleaner Oil Cup
- This cup is for Clamp Type Air Cleaners. This cup measures 4 3/4 inches outside diameter at the lip. The height is 3 inches. Please measure before ordering to ensure the proper fit. For models 2N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. Replaces: 311507. (Item #: 111005, Ref: 311507) $15.80

Ford 840 Air Cleaner Oil Cup
Air Cleaner Oil Cup
- For Ford tractor models 501, 541, 601, 611, 620, 621, 631, 641, 651, 700, 800, 900, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, Replaces Ford OEM number 311510, Height: 3.00", ID: 4.46", OD: 4.75", Color: Blue, (Item #: 172462) $33.50

Ford 840 Air Cleaner Tube
Air Cleaner Tube
- Used on Ford Tractors with 172 cubic inch 4 cylinder engines, 1954-1957, this tube has a 1.58 inch outside diameter. It is connected to the air cleaner and to the carburetor with part number 9N9652, sold separately. Replaces EAF9621B, 311112 (Item #: 178971, Ref: EAF9621B) $40.00

Ford 840 Air Funnel
Air Funnel
- For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960, (2000, 4000 ALL < 1964). (Item #: 151929, Ref: NAA9684A) $26.40

Ford 840 Air Hose to Carburetor - 1.5 Inches
Air Hose to Carburetor - 1.5 Inches
- For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Item #: 149842, Ref: 9N9652) $3.20

Ford 840 Air Hose to Carburetor - 2 Inch
Air Hose to Carburetor - 2 Inch
- For tractor models 601, 701, 771, 801, 811, 821, 841, 850, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000 series. All 1958 and up. For tractors using 2 inch metal pipe. (Item #: 159583, Ref: 311107) $6.40

Ford 840 Carburetor
Carburetor
- Cast Iron, like original. For tractor models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840. Replaces TSX580, Zenith 13880, and Ford #B4NN9510A. Uses 86531362 3/8 inch fuel line bolt. Center to center on the 2 mounting bolts is 2 1/4 inches. (Item #: 103147, Ref: EAE9510D-OE) $165.00