FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 7100 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Disc - For tractor models (5100, 520, 7100, 7200 1965-1975), (5600, 5700, 6600, 6700, 7600, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc 8.819 inch O.D. and 2.086 inch I.D. 22 Teeth. 5/8 inch wide facing. C7NN2A097B, C5NN2A097A, 83956599, E6NN2A097AA, 83956599. (Item #: 122174, Ref: C7NN2A097B) $24.50

Brake Disc, 9 Inch - With 1-9/32 inch wide lining, this disc was used in later production than the 5/8 width lining. This disc is 8 7/8 inches outside diameter, 2 1/8 inches inside diameter, facing width 1.31 inches, 22 internal tooth count. Used with 9 inch actuators. This part replaces Ford part numbers E9NN2A097BA, E9NN2N097BA, 83989830, 81818854, 83956599, E6NN2A097AA, 87518036, C7NN2A097B. (Item #: 105499, Ref: E9NN2A097BA) $27.30

Brake Disc, Intermediate Steel - Used with 9 inch actuators, this intermediate steel disc measures 8.976 outside diameter and 5 inch inside diameter. This part replaces Ford OEM numbers E6NN2N315AA, E6NN2N615AA, 83956598. Used on the following with 9 inch actuator disc brakes: 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 650, 6500, 660, 6600, 661, 6610, 6610S, 6640, 6700, 6710, 681, 6810, 7000, 7010, 7100, 7200, 7410, 755, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8030, 8210, 8240, 8340, TS100, TS110, TS120A, TS6000 Brazilian, TS6020 Brazilian, TS6030 Brazilian, TS6040 Brazilian, TS80, TS90 (Item #: 105513, Ref: E6NN2N315AA) $14.30

Brake Pedal Shaft - For Ford tractor models 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7800, 7810, Replaces Ford OEM number D2NN2478C, 83927298, D9NN2N337EA, (Item #: 154952) $31.00

Brake Rod Seal - For tractor models (750, 6600, 6700, 7500, 7600, 7700 from 1975-1980), 5000, 5610S, (6610, 6710, 7610, 7710, 7910 from 1981), (7100 from 1965-1975), 6610S, 6810S, 7610S, TV140, TV145, TV6070. Ford 86576339 (Item #: 105644, Ref: C5NN2N336A) $3.50

Hand Brake Repair Kit - This Hand Brake Repair Kit contains Rod. Knob, Pawl and Spring. Replaces 81816243, C7NN2N606B, C7NN2N616D, C5NN2N615B, 81708853, E0A2744, 81819533, 81819534, 81876606 (Item #: 183910, Ref: S.66303) $31.60

Intermediate Steel Brake Disc - For tractor models (5100, 5200, 7100, 7200, all 1965-1975), (5600, 5700, 6600, 6700, 7600, 7700, all 1975-1980), (5610, 6610, 6710, 7610, 7710, 7910, all 1981 and up). Intermediate Steel Brake Disc, 9 inch diameter. (Item #: 105513, Ref: C5NN2N315A) $14.30

Clutch

No
Picture
Clutch Alignment Tool, 1.40" Pilot Diameter, 10 Spline - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5200, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number 8301153, Pilot Diameter: 1.40", 1st Spline: 1-3/4", 10 Spline, (Item #: 176770) $27.80

$Ford 7100 Clutch Alignment Tool - 1-5\8 inchx 25 and 1-1\8 inchx 21 Spline$
Clutch Alignment Tool - 1-5/8"x 25 and 1-1/8"x 21 Spline - For Ford tractor models 4600, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8210, Compatible with Massey Ferguson tractor models 231, 240, 253, 261, 263, 265, 271, 281, 285, 360, 362, 365, 375, 383, 390, 393, 394, 396, 398, 399, 471, 583, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, (Item #: 119887) $24.40

Clutch Disc - Clutch Disc, 13 inch Heavy-Duty Clutch, 25-spline, 1-5/8 inch hub. For 5000, 5100, 5200, 6600, 6700, 7000, 7100, 7200. (Item #: 122188, Ref: E8NN7550KA) $91.00

Clutch Disc - 13 inch, 25 spline, 1-5/8 inch hub, rigid woven disc. Tractors: 5000, 5200, 5340 (1/1965-9/1969) less dual power, 5700 (1/1975-) less dual power, 6600, 6700 (10/1975-10/1981) less dual power, 7000, 7100, 7600, 7700 (10/1971-9/1975) less dual power. Replaces 82006014, 81866446, 83919288, D9NN7550CA, D2NN7550A, C5NN7550AV, 82445216, 87295811, F0NN7550AA. (Item #: 122188, Ref: 3919288) $91.00

Clutch Disc - 13 inch, 10 spline, 1-3/4 inch hub, rigid woven disc. Tractors: 5000 (1/1965-9/1969) Dual power, 5110 (1/981-12/1992) Dual power, 5200, 5340 (1/1965-9/1969) Dual power, 5640 (11/1991-), 5700 (1/1975-) Dual power, 6410 (1/1981-12/1992), 6600, 6700 (10/1975-10/1981) Dual power, 6610 (1/1981-) Dual power, 6640 (11/1991-), 6710 (1/1981-) Dual power, 7000 (10/1971-9/1975) Dual power, 7100, 7200 (10/1971-9/1975) Dual power, 7600, 7700 (10/1971-9/1975) Dual power, 8010, 8210 (4/1996-), TS90, TS100, TS110 (11/1997-). (Item #: 178334, Ref: 82011594) $146.00

Clutch Disc - 13 inch, 10 spline, 1-3/4 inch hub, 6 pad, dampened disc. Tractors: 5610 (1/81-), 5640 (11/91-), 6610 (1/81-) Dual power, 6640 (11/91), 7100, 7200 (10/71-9/75) Dual power, 7600, 7700 (10/71-9/75) Dual power, 7610, 7710 (1/81-) Dual power, 7740, 7840 (11/91-), 7810, 7910 (10/85-3/88), 8010, 8210 (4/96-), 8340 (11/91-), TS90, TS100, TS110 (11/97-). (Item #: 158737, Ref: E8NN7550PA) $264.00

Clutch Disc - For Ford tractor models TW5, 5000, 5100, 5110, 5200, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340 Replaces Ford OEM number 82845216, C5NN7550AV, D2NN7550A, D9NN7550CA, E8NN7550KA, F0NN7550AA, 82006014, , Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 122187) $207.00

No
Picture
Clutch Disc - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, Clutch Size: 13", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Spring, Clutch Type: Woven, Thickness: .380, For a Remanufactured version of this sku use Item #: 206146, (Item #: 135023) $108.00

No
Picture
Clutch Disc - For Ford tractor models TW5, TW10, 5110, 5340, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8200, 8210, 8240, 8340, 8530, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 8400 Replaces Ford OEM number 82011591, , Compatible with New Holland tractor models TS90, TS100, TS110, 7010, 8010, Replaces New Holland OEM number 82011591, 81871404, F1NN7550BA, 82004602, Pads: 6, Diameter: 13", Center: Springs, Splines: 10, Spline Diameter: 1.75", (Item #: 174024) $250.00

Clutch Disc, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7610, 7700, 7710, 7800, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 5 Pads, (Item #: 206140) $141.01

Clutch Disc, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206141) $107.01

Clutch Disc, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 or 7 Reg Pads, (Item #: 206142) $181.01

Clutch Disc, Remanufactured - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 7910, 8000, 8100, 8200, 8210, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Solid, Clutch Type: 6 Reg Pads, (Item #: 206143) $170.01

Clutch Disc, Remanufactured - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 206144) $193.01

Clutch Disc, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, Clutch Size: 13", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 135023, (Item #: 206146) $141.01

Clutch Disc, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, 7800, Clutch Size: 13", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 206147) $170.01

Clutch Disc, Remanufactured, C5NN7550M - For Ford tractor models 5000, 5100, 5200, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C5NN7550M, D2NN7550A, Clutch Size: 13", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Solid, Clutch Type: Woven, (Item #: 205555) $198.00

Clutch Disc, Remanufactured, D2NN7550A. - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, Replaces Ford OEM number D2NN7550A., Clutch Size: 13", Clutch Hub: 1-5/8", Clutch Spline: 25, Clutch Center: Solid, Clutch Type: Woven, (Item #: 206145) $120.00

Clutch Disc, Remanufactured, D8NN7550AA - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, 7810, 7910, 8000, 8100, 8200, 8210, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number D8NN7550AA, 86634442, Clutch Size: 13", Clutch Hub: 1-3/4", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Lg Pads, (Item #: 203629) $201.00

No
Picture
Clutch Disc, Woven NC - For Ford tractor models 4600, 4600SU, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 82006021, 86640489, 86640490, (Item #: 166238) $40.30

Clutch Kit - This new single stage clutch kit contains a new 13 inch pressure plate assembly with a 2.5 inch hub (D8NN7563AB), a new 13 inch, 25 spline, 1.625 inch hub, rigid drive disc (D2NN7550A), new release bearing (83914247), new pilot bearing (F0NNN779AA), and a clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Item #: 112323, Ref: FD13P25RD) $270.00

No
Picture
Clutch Kit - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number 82011590, 82011593, Clutch Diameter: 13", Clutch Hub Diameter: 1-3/4", Clutch Splines: 10, Clutch Center: Springs, Clutch Type: Woven, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, For Pressure Plate use Item #: 119888, Additional Handling and Oversize Fees Apply To This Item, (Item #: 119870) $429.00

Clutch Kit - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3610, 3900, 4110, 4190, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 334, 335, 545, 4140, Replaces Ford OEM number 82006626, D0NN7563A, Clutch Diameter: 11", Clutch Hub Diameter: 1", Clutch Splines: 10, Clutch Center: Solid, Clutch Type: Woven, Pressure Plate Size: 11", Pressure Plate Levers: 4, Pressure Plate Springs: 12, Pressure Plate Type: Single Stage, Flywheel Step Flat, For Pressure Plate use Item #: 122255, (Item #: 119879) $247.00

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4 inch hub 82011593, 13 inch single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB (Item #: 112322, Ref: 11126087) $330.00

Clutch Kit, Remanufactured - For Ford tractor models 5000 (10/71-9/75), 5100 (10/71-9/75), 5110 (10/71-9/75), 5190 (10/71-9/75), 5200 (10/71-9/75), 5340 (10/71-9/75), 5600, 5610, 5700, 5900, 6410, 6600, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7700, 7710, 7800 (with Dual Power), Clutch Diameter - 13", Clutch Hub Diameter - 1-3/4", Clutch Splines - 10, Clutch Center - Spring, Clutch Type - 6 Large Pads, Pressure Plate Size - 13", Pressure Plate Levers - 4, Pressure Plate Springs - 16, Pressure Plate Type - Single Stage, For a New version of this sku use Item #: 112322, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202043) $506.40

Clutch Pack Housing - This Clutch Pack Housing comes without clutches. It replaces original part numbers 83931457, D0NN7R036A, D0NN7R036B, D2NN7R036A, D2NN7R036B, D3NN7R036A, D5NN7R036A, D5NN7R036B, D6NN7R036A, D8NN7R036AA, E0NN7R036AA, E0NN7R036AB. (Item #: 179282, Ref: E0NN7R036AB-B) $394.00

Clutch Pedal Bushing - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610, 7810S, 8030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 532, 535, 540, 540B, 545, 545A, 545C, 545D, Replaces Ford OEM number C5NN7A578A, 81805392, C5N7A578A, (Item #: 169656) $6.70

No
Picture
Clutch Plate - For Ford tractor models 4600, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7700, Replaces Ford OEM number E0NN7563CA, 83925716, (Item #: 166027) $153.00

No
Picture
Clutch Release Bearing Hub, Used - For Ford tractor models 5000, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C5NN7N541B, Replaces Ford Casting nos 7N541B, For a new version of this item use Item #: 154957, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457316) $97.01

Clutch Set, LuK XX - For Ford tractor models 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (5/85-12/93), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7700 (1/75-12/80), Replaces Ford OEM number E0NN7563CA, E7NN7550DA, Set includes: E0NN7563CA 12" plate assembly, E7NN7550DA 12" disc, Spline: 10, Shaft: 1-3/4", For Just Pressure Plate use Item #: 122242, (Item #: 166183) $338.00

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Item #: 166322, Ref: C5NN7A615A) $5.70

Clutch Unit - Diaphragm, Remanufactured - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS80, TS90, TS100, TS110, 8010, Clutch Diameter - 13", Clutch Hub Diameter - 1-3/4", Clutch Splines - 10, Clutch Center - Spring, Clutch Type - 6 Pads, Pressure Plate Size - 13", Pressure Plate Type - Diaphragm, Additional Handling and Oversize Fees Apply To This Item, (Item #: 205234) $485.01

Clutch Unit, Remanufactured - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7800, Clutch Diameter: 13", Clutch Hub Diameter: 1-5/8", Clutch Splines: 25, Clutch Center: Solid, Clutch Type: Woven, Pressure Plate Size: 13", Pressure Plate Type: Single Stage, Includes pressure plate and engine clutch disc only, Does not include bearings, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206258) $460.01

Friction Plate, Select-O-Speed #2 or #3 - For tractor models 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Item #: 152079, Ref: C0NN7B455A) $70.00

Pressure Plate Assembly - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7840, 8240, 8340, 8530, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS100, TS110, Pressure Plate Size: 13", Pressure Plate Levers: Diaphragm, Pressure Plate Springs: Diaphragm, Pressure Plate Type: Single Stage, For a Remanufactured version of this sku use Item #: 206267, (Item #: 122250) $298.00

Pressure Plate Assembly, Remanufactured, D8NN7563AB, 86634446 - For Ford tractor models TW5, TW10, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7840, 8240, 8340, 8530, 8600, 8700, 9000, 9200, 9600, 9700 Replaces Ford OEM number D8NN7563AB, , Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 86634446, Pressure Plate Size: 13", Pressure Plate Levers: 4, Pressure Plate Springs: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206209) $196.00

Spring - Spring for Clutch and Brake Lever Assist. Tractors: 3550, 4000 (11/1972 and up), 5100, 7100 (1965 and up), 420, 515, 532, 535, 4600, 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981). (Item #: 164364, Ref: C5NN2472H) $4.60

Trans. Disc, 13 - Spring Loaded, Organic, 1.750 inch Spline diameter, 10 Spline. For tractor models: 4830, 4830N, 5000, 5100, 5110, 5200, 5550, 5600, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, TS100, TS80, TS90. (Item #: 110590, Ref: 82011593) $110.00

Cooling System

Radiator - Radiator Assembly with Oil Cooler. For tractor models 7000, 7100, 7200. For Radiator Cap order part number E2NN8100BA. Inlet 1 1/2 inches, Outlet 1 3/4 inches, Ht: 24 inches, W: 18 1/2 inches, Thickness: 4 1/4 inches, Core Ht: 17 5/8 inches, W: 17 7/8 inches, Thk: 3 inches, 5 Rows of tubes, 7 Fins per inch. (Item #: 101882, Ref: D3NN8005B) $332.00

Radiator Hose, Lower - This Lower Hose has an inside diameter on the small end of 1.645 inches and 1.757 on the larger end. For tractor models 445 Diesel and Gas, 450 Diesel and Gas, 4500, 535, 540 Diesel, 545 Diesel, 6500 Construction, 335, 5000, 5100, 5600 (without Oil Cooler), 5900 (without Air Conditioning), 6600 (without Oil Cooler), 7000, 7100, 7600 (without Oil Cooler). (Item #: 116911, Ref: C5NN8286C) $9.70

Radiator, Premium Used - For Ford tractor models 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5190, 5200, 5340, 7000, 7100, 7200, Replaces Ford OEM nos D3NN8005B, Our premium used radiators have been cleaned, inspected, and pressure checked, (Item #: 300168) $305.01

Water Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 4630, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 3500, 3550, 4400, 4500, Replaces Ford OEM number D3NN8501A, 87800115, 81814205, 81838685, 83905629, 83914192, 83919542, 83926000, 83943914, 88NY8501AA, C5NE8501A, C5NN8501A, D8NN8501CA, D8NN8501UA, D8NN8501UB, D8NN8501UC, For models without heater plug or cab heater, With Single Pulley, Includes: pump to backplate gasket, backplate, backplate to block gasket, For pump with heater hole use Item #: 115341, (Item #: 140587) $81.00

Decals and Emblems

No
Picture
Decal Set - Hood only 6 piece set for 7100. (Item #: 183425, Ref: R0524) $24.90

Drive Train

Counter Shaft - Note that there is some discrepancy in OEM numbers on this part. This Counter Shaft has an inside diameter of 2.125 inches. Measure before ordering. If you have 2.065 inside diameter, then order part number C9NN7111B. It replaces C5NN7111G, C9NN7111B, D0NN7N047A, D2NN7111A, 81826590, 81878438, 81822960, 82930758, 82987564, 82983059, 83948780, 83960001, E6NN7111AA, E4NN7110AA (Item #: 172859, Ref: E6NN7111AA) $182.75

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $485.28

Drive Plate Bearing - Measuring 2.68 inches outside diameter, 1.43 inches inside diameter, 0.59 wide. It is listed here as a Transmission Drive Plate bearing but has other applications. Replaces OEM numbers 47508382, 81811675, 81816675, C5NNN779A, C5NN779B, 83992560, F0NN779AA, C5NNN779B, F0NNN779AA. Used on Ford 4400, 4500, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8030, 8100, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TS100, TS110, TS80, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 108005, Ref: C5NNN779B) $14.80

Gear, 1st - 46/28 tooth. For tractor models 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N100A, E6NN7N100AA, C5NN7N100C, 81813521, 83960019 (Item #: 165999, Ref: 83960019) $156.00

Gear, 1st and 5th - Used on 8 speed transmissions on Ford models 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7840, 8010, 8240, TS100, TS90. This gear has 46 and 28 teeth. It replaces OEM numbers 83946988, 82987560, E6NN7N100BA, E2NN7N100AA, 83959993, D2NN7N100A, 81826587 (Item #: 179401, Ref: E6NN7N100BA) $170.00

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. Replaces C5NN7N012B. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, 83963585, E2NN7N012AA, E6NN7N012AA, 81872311, 83960462, 81813476 (Item #: 170396, Ref: E6NN7N012AA) $158.00

Gear, Reverse - 28/32 tooth, 1.800 inch inside diameter, 4.800 inch outside diameter. For tractor models: 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Item #: 170396, Ref: 83960462) $158.00

Gear shift assembly - For tractor models 5000, 5100, 5200, 7000, 7100, 7200. The plate on this shifter is 11 inches wide and 13.25 long. (Item #: 114127, Ref: C5NN7222) $214.00

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Item #: 164365, Ref: C5NN27534) $3.90

Gear Shift Coupler, Front - 28 teeth, 17 splines. For tractor models 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Item #: 163571, Ref: E6NN7N072AA) $75.00

Gear Shift Coupler, Rear - 28 teeth, 20 spline. For tractor models 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Item #: 167824, Ref: 82983825) $73.00

Gear Shift Cover Gasket - This Gear Shift Gasket is used with C5NN7222 Gear Shift Assembly. Replaces 83958298, D2NN7223A, E0NN7223BA, 81829229, E5NN7223AA (Item #: 164338, Ref: E5NN7223AA) $5.00

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Item #: 121228, Ref: E440GB9) $2.90

Hi-Low Shift Lever - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610, 7810, Replaces Ford OEM number C7NN7210AB, 81818562, (Item #: 154971) $62.00

Input Shaft Seal - The measurements on the seal are 2.283 inch inside diameter, 3.130 inch outside diameter, 0.375 inch wide. This seal replaces OEM numbers: D9NN7048BA, D6NN7048B, D2NN7048A, 81826482, C5NN77047A, D9NN7048AA, 83924926, 83912260, 83924160. Used on Ford 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, TS100, TS90 (Item #: 172928, Ref: D9NN7048BA) $6.20

Input Shaft, Transmission - For tractor models 5000, 5100, 5600, 6600, 6700, 7100, 7200, 7600, 7700. All without dual power. 19.125 inches long. 20 and 25 Splines. Replaces original part numbers C5NN7017A 81804582. (Item #: 119206, Ref: C5NN7017A) $85.00

Input Shaft Tube - This Input Shaft Tube is used on 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600 Ford Tractors. Replaces original part numbers C5NN7N541B, 81805278 (Item #: 154957, Ref: C5NN7N541B) $207.00

Main Shaft - This Transmission Main Shaft has 30 teeth, 18/16 splines. It is 9.937 inches long. When replacing C9NN7C094B in units manufactured before 11/02/1971 it will also be necessary to replace C9NN7N315B. Replaces C9NN7C094B, C5NN7C094C. (Item #: 170132, Ref: C9NN7C094B) $254.00

Main Shaft - This Transmission Main Shaft is used with Dual Power and PTOs. It has 30 and 18 Teeth. Replace original part numbers E2NN7C094DA, E7NN7C094AA (Item #: 179391, Ref: E2NN7C094DA) $258.00

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $23.60

Output Shaft and Coupling Assembly - Used on 8 speed transmissions on the following (7000 With or without Dual Power), (5600, 6600, 6700 all 5/1984 and later without Dual Power), (5900 1981 - 7/1987 with Dual Power), (5610, 6610, 6710 6810, 7610, 7710 1981-7/1987 with Dual Power), 5640, 6640, 7740, 7840, 8240. Note that the non-splined end is 0.75 inches in diameter. Replaces Ford part numbers 81833752, 81822960, 81826590, 81878438, 82983059, D0NN7N071A, D2NN7N071A, D2NN7N071B, 83959995, E6NN7N71BA, E6NN7N071BA (Item #: 182884, Ref: E6NN7N071BA) $173.00

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Item #: 150013, Ref: 86512015) $14.50

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Item #: 165990, Ref: E6NN7145AA) $370.00

Output Shaft Pilot Bearing - Measures 25mm inside diameter, 52mm outside diameter, 16.25mm wide. It replaces: E76GA9, C5NN7N014A, 86705858, C5NN7N047A, C5NN7N044A, 83990517, 81804636, 81804637, C5NN7N048A, F718701030030, 339482X1, 3010151X91, 194145-11910, 971326, 30205, 30205M-TIM, 30205M (Item #: 185088, Ref: C5NN7N014A) $14.90

PTO Clutch Driving Plate - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8670, 8770, 8870, 8970, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, TV140, TV145, TV6070, Replaces OEM number 9824099, (Item #: 165271) $30.10

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91) $6.40

Reverse Idler Shaft - Used on Ford / New Holland 4 and 6 cylinder models with 8 speed transmissions, this shaft is 3.5 inches long. Replaces OEM numbers C7NN7140C, 81817885 (Item #: 182891, Ref: C7NN7140C) $52.00

Secondary Countershaft - With a teeth count of 16-35-16, this Secondary Countershaft replaces Ford part numbers D9NN7B281CA, 81822961, C9NN7113B. It is used on Ford models: 345C, 345D, 445, 5000, 5100, 5110, 5190, 5200, 5340, 545, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240 (Item #: 166071, Ref: C9NN7113B) $142.00

Secondary Output Shaft Bearing - With measurements of 19mm inside diameter, 53.9mm outside diameter, and 15.9mm this bearing and cone assembly replaces Ford / New Holland part numbers D0NN7N047A, D2NN7111A, 81823619, 81823620, 81822960, 82930758, E6NN7061BA, E6NN7106AA, D0NN7N048A (Item #: 182935, Ref: D0NN7N047A) $38.70

Secondary Transmission Countershaft - This Gear has 16-34-16 teeth. It replaces Ford part numbers 81823634, D0NN7113C. This gear is used on Ford models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710 (Item #: 180174, Ref: D0NN7113C) $411.00

Shift Knob - For tractor models Dexta, Super Dexta, (Major from 8/1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. 5/16 Inch - 24 UNF Thread. 81804882, 957E7213, NAA7209A Note, this part may arrive spherical as shown, or more flattened like BB7213A. This part is differentiated by 5/16 Inch - 24 UNF Thread. (Item #: 116912, Ref: C5NN7213A) $6.00

$Ford 7100 Transmission 3rd \ 7th Gear$
Transmission 3rd / 7th Gear - Part number D2NN7N315A is the third / seventh gear in 8 speed transmissions on Ford models: 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710. This gear has 34 teeth. Verify before ordering. Replaces D2NN7N315A, 81826596 (Item #: 182870, Ref: D2NN7N315A) $120.00

Transmission Mainshaft Front Bearing - Used in the transmissions of some of the following Ford models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 8010, 8240, this bearing has an inside diameter of 65mm, outside diameter of 100mm and is 18mm wide. This bearing has applications not list. It replaces OEM numbers; Ford / New Holland 81804635, C5NN7N046A, 5181866, Kubota 8101-06013. Landini SKF6013, 339673X1, Massey Ferguson 339673X1, Yanmar 24101-060134, Zetor 971014, 971019 (Item #: 182963, Ref: C5NN7N046A) $39.90

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Item #: 155727, Ref: C5NN77086A) $5.90

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Item #: 167824, Ref: E6NN7N072BA) $73.00

Electrical System

Alternator with Tach Drive - The is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. See kit 6X10300ALTH. Used on Ford Tractors 1965 and later. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $140.00

Battery Tray - 73 and 80 Amp Battery - For Ford tractor models 2000 (gas), 2100 (gas), 2110 (gas), 2120 (gas), 2300 (gas), 2310 (gas), 2310 (diesel), 2600 (diesel), 2610 (diesel), 2810 (diesel), 2910 (diesel), 3000 (gas), 3055 (gas), 3100 (gas), 3110 (gas), 3120 (gas), 3150 (gas), 3300 (gas), 3310 (gas), 3330 (gas), 3400 (gas), 3600 (diesel), 3610 (diesel), 3900 (diesel), 3910 (diesel), 4000 (gas), 4100 (gas and diesel), 4110 (gas and diesel), 4140 (gas), 4200 (gas), 4330 (gas), 4340 (gas), 4400 (gas), 4410 (gas), 4600 (diesel), 4600SU (diesel), 4610 (diesel), 4610SU (diesel), 5000 (gas), 5100 (gas), 5110 (diesel), 5200 (gas), 5340 (gas), 5600 (diesel), 5610 (diesel), 5900 (diesel), 6410 (diesel), 6600 (diesel), 6610 (diesel), 6810 (diesel), 7000 (diesel), 7100 (diesel), 7200 (diesel), 7600 (diesel all 1966-later), Compatible with Ford Construction and industrial models 230A (diesel), 231 (diesel), 233 (diesel), 234 (diesel), 333 (diesel), 334 (diesel), 335 (diesel), 420 (diesel), 515 (diesel), 530A (diesel), 531 (diesel), 532 (diesel), 535 (diesel), 3500 (gas), 3550 (gas), 4500 (gas all 1966-later), Replaces Ford OEM number D3NN10723A, 81837763, C5NN10N650A, C9NN10723B, For 73 or 80 amp battery, Dimensions: 17-1/2" x 8", Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155837) $71.00

Fuse Box Assembly - Eight amp, six fuse, fuse box. For tractor models (2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100 all 8/1970 and up without hazard warning indicators), (4330, 4340, 5000, 5100, 5340, 7000 all 8/1970 and up without cab or hazard warning indicator), (3110 5/1973 and up without cab or hazard warning indicator), (4140 5/1973 and up without hazard warning indicator) Replaces C9NN14N030B. (Item #: 172533, Ref: D2NN14N030A) $9.40

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Item #: 112273, Ref: 376852R91) $10.40

Hold-down, Battery Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600 (& N, R, V), 3000 (Series), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4500, 4600, 4600SU, 5000 (Series), 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000 (Series), 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 250C, 260C, 333, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 455, 455C, 455D, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, Replaces Ford OEM number D6NN10716C, 83925344, For 128Ah 4DLT Diesel Battery, (Item #: 176620) $92.00

Ignition Key Switch - 5 Position, 7 Terminal - For Ford tractor models TW10, TW30, 650, 2000 (3 Cyl), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3310, 3330, 3400, 3600, 3610, 3910, 3930, 4000 (3 Cyl), 4100, 4110, 4600, 4630, 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6600, 6610, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, Compatible with Ford Construction and industrial models 515, 531, 535, 550, 3500, 4400, 4500 Replaces Ford OEM number 82849085, C5NN11N572A, C5NN11N501A, D5NN11N501A, E8NN11N501AA, E7NN11N501AB, E7NN11N501AC, 82849165, D5NN11572A, , Compatible with New Holland tractor models 3010S, 8010, Replaces New Holland OEM number 82849085, For gas and diesel with or without cold start, 5 Position 7 spade Switch, Threaded stem measures 3/4 - 27, (Item #: 124296) $14.80

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $8.70

Ignition Switch, Keyed - This three position Ignition Switch has 5 terminals. Gas or diesel without cold start.It is widely used on Ford / New Holland Tractors 1965 and later. Comes with 2 keys. Replaces C5NN11N572A, D3NN11N572A, 81806736, 81838693, 82849165. (Item #: 185146, Ref: D3NN11N572A) $17.60

Starter, Diesel Engines - With single contact solenoid, 12 volt, 10 tooth, CW rotation. For tractor models TW10, TW20, TW25, TW30, TW35 1979-1983 with 6-401, 2000, 3000 1965-1975, 2310 1982-1985, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 with 3-158, 2910 1983-89 with 3-175, 3000 1965-68 with 3-175, 3230 1990-95 with 3-192, 3430 1990-98 with 3-192, 3610 1982-83 with 3-192, 3910 1983-90 with 3-192, 3930 1990-96 with 3-201, 4000 1965-72 with 3-192 or 3-201, 4100 1978-81 with 3-183, 4110 1977-83 with 3-201, 4630 1989-96 with 3-201, 1990-99 with 3-192 diesel, 5000 1965-76 with 4-256, 5030 1992-96 with 4-256, 5600 1975-81 with 4-256, 5610 1981992 with 4-256, 5900 1985-93 with 4-256, 6600 1975-81 with 4-256 diesel, 6610 1982-92 with 4-268, 6700 1975-81 with 4-256, 6710 1982-85 with 4-256, 7000, 7100, 7200 1971-75 with 4-256), 7400 1975-76 with 4-256, 7600, 7700 1975-81 with 4-256, 7710 1982-91 with 4-268, 7810 1978-91 with 6-401, 8000 1968-87 with 6-401, 8210 1978-91 with 6-401. Replaces 26395, 26211, 26339A, SLU003. (Item #: 100300, Ref: SLU0002) $150.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Item #: 181969, Ref: 80855520) $190.00

Starter Drive - Replaces; D2NN11350A, 2701E11005A on 4 1/2 inch starter. For tractor models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Item #: 182914, Ref: C5NF11005C) $11.40

Engine Bearings

No
Picture
Ball Bearing - Power Steer Gear Assembly - For Ford tractor models Dexta, Super Dexta, 2310, 2600, 2810, 2910, 3230, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5610, 6600, 6610, 6710, 7000, 7100, 7410, 7600, 7610, 7710, Compatible with Ford Construction and industrial models 234, 334, 532 Replaces Ford OEM number C9NN3647A, 119811ES, , Compatible with Massey Ferguson tractor models 35, 35X, 135, 148, 230, 240, 250, Replaces Massey Ferguson OEM number 3900187M1, 3711715M1, 354466X1, 2971X, Replaces New Holland OEM number 81822004, Size: 5/16", Material: Carbon Steel, (Item #: 168936) $0.50

Flywheel With Ring Gear - This Flywheel with Ring Gear is used with 13 inch clutches. It has 128 teeth. Used on engines: BSD332, BSD333, BSD444, BSD444T Replaces F1NN6375AA, 81871636 (Item #: 159169) $620.00

No
Picture
IPTO Clutch Kit - For Ford tractor models 5000 (2 Speed), 5100 (2 Speed), 5200 (2 Speed), 5600, 5700, 5900, 6600, 7000 (2 Speed), 7100 (2 Speed), 7200 (2 Speed), 7600, 7700, 7910 (2 Speed), 8210 (2 Speed), Includes: (4) Friction Discs, (4) Separator Plates, (1) Piston Ring, (1) Piston Seal, (3) Sealing Rings, (Item #: 176973) $206.00

LuK® Permium Clutch Pilot Bearing - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6500, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, Replaces OEM number F0NNN779AA, 83992560, C5NNN779B, For Standard Duty use Item #: 108005, (Item #: 169092) $28.76

Main Bearings - .020" Oversize - Set - For Ford tractor models Super Major, 4830, 5000 (1965-3/68), 5030, 5100, 5600 (1975-9/80), 5610 (1981-'93), 5900, 6600, 6610 (1981-93), 6710, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 555C, 555D, 575D, 650, 655, 655A, 655C, 750, 755, 755A, 755B, Compatible with Ford Engine (s) 268, 268T, Replaces Ford OEM number 87790359, 87790492, Sold in complete set, Bearing Size: .020", Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106418, (Item #: 106416) $75.00

Main Bearings - .030" Oversize - Set - For Ford tractor models Super Major, 4830, 5000 (1965-3/68), 5030, 5100, 5600 (1975-9/80), 5610 (1981-'93), 5900, 6600, 6610 (1981-93), 6710, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 555C, 555D, 575D, 650, 655, 655A, 655C, 750, 755, 755A, 755B, Compatible with Ford Engine (s) 268, 268T, Replaces Ford OEM number 87790360, 87790493, Sold in complete set, Bearing Size: .030", Full groove upper with slot and small oil hole, For Standard main bearing use Item #: 106418, (Item #: 106417) $57.00

Main Bearings - .040" Oversize - Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2120 (1/65-12/74), 2300 (1/65-12/74), 2310 (1/65-12/74), 2310 (3/82-12/83), 2600 (1/75-12/81), 2600 (N, R, 1/75-12/81), 2600 (V, 10/75-9/96), 2610 (1/81-4/83), 2610 (V, 1/81-2/90), 2810 (1/84-2/90), 2910 (5/83-2/90), 3000 (1/65-12/74), 3055 (1/65-12/74), 3100 (1/65-12/74), 3120 (1/65-12/74), 3190 (1/65-12/74), 3230 (3/90-9/93), 3300 (1/65-12/74), 3310 (1/65-12/74), 3330 (1/65-12/74), 3400 (1/65-9/75), 3430 (3/90-1/98), 3500 (1/65-12/74), 3550 (1/65-12/74), 3600 (1/75-12/81), 3600 (N, NO, V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610 (V, 1/81-4/83), 3610 (8/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (5/83-2/90), 3910 (H, N, 1/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 3930 (3/90-7/99), 3930 (H, 3/90-8/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4110 (1/81-2/90), 4110 (V, 1/81-2/90), 4110 (NO, O, 1/81-2/90), 4110 (N, 12/81-2/90), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4140 (1/65-12/74), 4190 (1/65-12/74), 4200 (1/65-12/74), 4330 (1/65-12/74), 4340 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 4500 (1/65-12/74), 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-7/81), 4610 (1/81-2/90), 4610 (V, 1/81-2/90), 4610 (NO, O, 1/81-2/90), 4610 (N, 1/81-2/90), 4610SU (8/81-2/90), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-later), 4830 (7/90-5/94), 4830 (N, O, 7/90-5/94), 5000 (1/65-1/75), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), 5100 (1/65-12/74), 5110 (5/84-10/91), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (Mexico, 5/85-12/93), 6410 (UK, 1/81-12/91), 6500 (3/73-10/75), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 6810 (4/89-10/91), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7410 (4/89-10/91), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7610 (1/81-10/91), 7610 (O, 10/81-12/91), 7700 (1/75-12/80), 7710 (1/81-10/91), 7810 (2/88-10/91), 7810 (O, 2/88-10/91), 7910 (1/82-10/91), 8000 (1/68-12/98), 8200 (1/68-12/98), 8210 (1/82-10/91), 8400 (1/71-9/72), 8530 (3/90-12/93), 8600 (10/72-7/76), 8630 (3/90-12/93), 8700 (8/76-12/78), 8730 (3/90-12/93), 8830 (3/90-12/93), 9000 (1/69-12/78), 9200 (1/69-9/72), 9600 (10/72-7/76), 9700 (8/76-12/78), Compatible with Ford Construction and industrial models A62 (1/74-12/83), A62 (5, Europe, 1/74-12/84), A64 (1/74-12/83), A66 (1/74-12/83), 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 250C (9/89-12/94), 260C (9/89-12/94), 333 (1/75-12/81), 334 (1/81-4/83), 335 (Highway, 1/83-2/84), 335 (10/75-9/78), 340 (3/79-9/81), 340A (10/81-5/85), 340B (6/85-11/88), 345C (12/88-8/92), 345D (9/92-10/00), 420 (10/75-9/78), 445 (1/78-5/85), 445A (6/85-11/88), 445C (12/88-8/92), 445D, 450 (1/87-11/88), 455 (7/87-11/88), 455C (12/88-8/93), 455D (9/92-9/96), 515 (10/75-9/78), 530A (1/81-4/83), 531 (1/75-12/81), 532 (10/75-9/78), 535 (10/75-9/78), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (1/84-11/88), 545C (12/88-8/92), 545D (9/92-12/00), 550 (1/75-9/78), 555 (10/78-10/88), 555A (1/84-5/85), 555B (6/85-10/88), 555C (11/88-8/93), 555D (1/70-12/73), 555D (9/93-7/96), 575D (9/93-7/96), 650 (11/75-12/77), 655 (7/85-10/88), 655A (6/85-10/88), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), 750 (11/75-12/77), 755 (1/78-12/83), 755A (1/84-12/86), 755B (1/87-1/93), Compatible with Ford Engine (s) BSD332 (9/81-later), BSD333 (H, Diesel, 1/81-later), BSD333 (1/81-later), BSD442 (1/81-later), BSD444 (HT, 1/87-later), BSD444 (H, Diesel, 12/86-later), BSD444 (1/81-later), BSD4 (Item #: 166956) $48.50

No
Picture
PTO Drive Clutch Piston - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600 (& C, O), 6610 (& O, S), 6640 (& O), 6700, 6710, 6810 (& S), 7000, 7100, 7200, 7410, 7600 (& C), 7610 (& O, S), 7700, 7710, 7740 (& O), 7810 (& O, S), 7840 (& O), 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8670 (& A), 8700, 8730, 8770 (& A), 8830, 8870 (& A), 8970 (& A), 9000, 9030 (& E, V), 9200, 9600, 9700, Compatible with Ford Construction and industrial models 8400 Replaces Ford OEM number F1NNN786AA, D3NNN786A, C5NNN786C, C9NNN786A, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, TV6070, 7010, 8010, (Item #: 176508) $22.30

PTO Drive Shaft Bushing - Front - For Ford tractor models 5000, 5100, 5200, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810S, 7840, Replaces Ford OEM number C5NN798A, Inside Diameter: 1.131", Length: .94", (Item #: 165270) $5.96

Engine Gaskets

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Item #: 106352, Ref: D5NN6700A) $9.00

No
Picture
Exhaust Elbow Gasket - For Ford tractor models TW20, TW30, 6600, 7000, 7100, 7200, 7600, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 750, 755, 755A, 755B, 7500, 8400, Replaces Ford OEM number C9NN5B209A, Replaces manufacturer number VPE3952, (Item #: 176431) $7.90

Gasket Set, Lower - For 233/268 DIESEL or 256 GAS/DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Item #: 106347, Ref: CFPN6A008C) $55.00

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Item #: 106335, Ref: F0NN6710AA) $9.80

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.00

Engine Rebuild Kits

Engine Rebuild Kit with Valve Train - Less Bearings, BSD442T, 256T - For Ford tractor models 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-9/80), 7700 (1/75-9/80), Compatible with Ford Construction and industrial models A62 (1/74-12/80), 750 (11/75-12/77), 755 (1/78-10/80), 7500 (3/73-10/75), Compatible with Ford Engine (s) BSD442T, 256T, Bore: 4.4007", Stroke: 4.203", Models 10/71-12/80, 1.625" piston pin, Dished bowl, Keystone top ring, Ni-resist ring insert, Early rod, Kit includes: Pistons, Piston Ring Set, Connecting Rod Bushings, Gasket set with Crank Seals, and Valve Train Set, Kit does not include connecting rod or main bearings, For standard connecting rod bearing use Item #: 106417, (Item #: 130835) $456.00

Piston and Rings - .030" Oversize - For Ford tractor models 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models A62, Compatible with Ford Engine (s) 256, Replaces Ford OEM number D6NN6108A-30, (Item #: 167071) $101.00

Piston and Rings - .040" Oversize - For Ford tractor models 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models A62, Compatible with Ford Engine (s) 256, Replaces Ford OEM number D6NN6108A-40, (Item #: 167055) $85.00

Piston and Rings - Standard - For Ford tractor models 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models A62, Compatible with Ford Engine (s) BSD442T, 256, Replaces Ford OEM number D6NN6108A, F2NN6K100GA, 81877566, Standard, (Item #: 167066) $111.00

Engine Parts

Clutch Disc - For Ford tractor models 5000, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, 8000, 8200, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 8400, Replaces Ford OEM number D2NN7R000A, C9NN7R000A, 6.820" Major / 6.640" Minor Inner Diameter, 9.005" Outer Diameter, 0.082" Width, 80 Teeth, (Item #: 155517) $77.00

Connecting Rod - This Connecting Rod replaces rods with casting numbers C9NN6205C, E1NN6205EA. Used on Ford / New Holland: TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700. Fits Ford Construction and Industrials A62, A66, 575, 750, 755. 1.625 Inch piston pin. Replaces original part numbers E1NN6205, C9NN6205C, E1NN6205EA, 87801220. (Item #: 128699, Ref: C9NN6205C) $96.00

Connecting Rod - Used on Turbo-Charged Engines with 1.625 Inch Piston Pins, this connecting rod replaces Ford, New Holland part numbers 81819490, 81864273, 81875652, 83947560, 83955929, 83959784, 83973859, 87770983, C9NN6200C, E4HN6200AC, E4NN6200BA, E4NN6200BB, E8NN6200AA, E9NN6200DA, F2NN6200EA. It is used on Turbo charged engines, 1969-1988. 7000, 7100, 7200, 7600, 7700, 7410, 7610, 7710, TW15, TW20, TW25, TW35, 9000, 9600, 9700, TW30, 8630, 8730, 8830, 9200, 276V, 9030E, 9030V, 276VII, 750, 755, 555C, 655C, A62, A66, 555D, 575D, 655D, 675D, 7500, 755A, 755B. Engines BSD442, BSD666T, BSD666TI, BSD444HT, and BSD444T (Item #: 128699, Ref: F2NN6200EA) $96.00

No
Picture
Connecting Rod, Remanufactured, E1NN6205 - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 7000, 7100, 7200, 7400, 7600, 7610, 7700, 7710, 8630, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 575, 750, 755, Replaces Ford OEM number E1NN6205, C9NN6205C, E1NN6205EA, 1.625" Piston Pin Size, For a New version of this sku use Item #: 128699, (Item #: 210295) $119.01

Connecting Rod, Used - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 5610 (Turbo), 5900 (Turbo), 6410 (Turbo), 6610 (Turbo), 6710 (Turbo), 6810 (Turbo), 7000, 7100, 7200, 7410 (Turbo), 7600, 7610 (Turbo), 7700, 7710 (Turbo), 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 555C (Turbo), 555D (Turbo), 575D (Turbo), 655C (Turbo), 655D (Turbo), 675D (Turbo), 750, 755, 755A, 755B, 7500 Replaces Ford OEM number E9NN6200DA, F2NN6200EA, E8NN6200AA, E4HN6200AC, E4NN6200BB, E4NN6200BA, C9NN6200C, , Compatible with New Holland Hay Cutting(s) 1118, Replaces New Holland OEM nos 3973859, 81875652, 81864273, 83973859, 83959784, 3959784, 3955929, 87770983, 502164, 83955929, 83947560, 81819490, 87801220, Wrist pin bushing ID: 1.625", Squared - Non-tapered wrist pin end, Oil port drill through length of beam, For a new version of this item use Item #: 210295, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446696) $50.01

Crankshaft - 4 cylinder, 4.2 inch stroke, 12.5 mm 78 tooth Balancer Gear. Uses 36 mm wide Rod Bearings. NOTE: Measure Balancer Drive Gear before ordering. Do not mix sizes. Used on 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Fits Ford Construction and Industrial (s) A62, 650, 655, 750, 5500, 5550, 7500. Replaces 81804029, C5NE6303K, F0NN6300FB (Item #: 100552, Ref: C5NE6303K) $604.00

Crankshaft - 76 Tooth Gear - Late - For Ford tractor models Super Major, 5000, 5100, 5190, 5200, 5600, 5610, 5700, 6000, 6500, 6600, 6610, 6700, 6710, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 650, 655, 750, 5500, 5550, 7500, Compatible with Ford Engine (s) BSD442, 256, Replaces Ford OEM number 81804029, C5NE6303K, F0NN6300FB, Replaces Casting number 6110A, Engine: 256 CID - 4.2 Stroke, 4 Cylinder, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Balance Drive Gear: 76 Tooth Right Hand Helix, 15MM Wide - Installed, Snout: 1 Bolt Hole, 1 Keyway, Verify gear tooth count before ordering, Additional Handling and Oversize Fees Apply To This Item, (Item #: 100553) $452.00

Crankshaft - 76 Tooth Gear - Late - For Ford tractor models 6000, 6600, 6610, 6700, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 7500, Compatible with Ford Engine (s) BSD444, 268, Replaces Ford OEM number E5NN6303DA, Replaces Casting number 1598N, D9NN6110AA, D9NN6303A, D9NN6303AA, E5NN6303CA, D5NN6303FA, Engine: BSD444, 268, 4 Cylinder, 4.4" Stroke, Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole, Snout: 1 Bolt Hole, 1 Keyway, Teeth: 76 helix cut left to right if looking from rear, Verify gear tooth count before ordering, For a Remanufactured version of this sku use Item #: 205186, (Item #: 102101) $497.00

Crankshaft Pulley - Used on Ford / New equipment built 1965 and later. This is a single groove pulley. This pulley is not for Shibaura built compacts. Replaces D5NN6A312A, 83903583 (Item #: 154921, Ref: D5NN6A312A) $125.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Item #: 154924, Ref: C5NE6B306A) $20.30

Engine Balancer - For 2000 3 cylinder gas, 3000 gas, 4000 3 cylinder gas, 5000 gas and diesel, 5600, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710. Replaces 87802137, D9NN6A311AD, 83924287. Used through 8/1986. 1/2 inch wide gears. (Item #: 168875, Ref: D9NN6A311AD) $378.00

Ford, 87801220, New Holland, 3973859, Used - For Ford tractor models TW15, TW20, TW25, TW30, TW35, 5610 (Turbo), 5900 (Turbo), 6410 (Turbo), 6610 (Turbo), 6710 (Turbo), 6810 (Turbo), 7000, 7100, 7200, 7410 (Turbo), 7600, 7610 (Turbo), 7700, 7710 (Turbo), 8630, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A66, 555C (Turbo), 555D (Turbo), 575D (Turbo), 655C (Turbo), 655D (Turbo), 675D (Turbo), 750, 755, 755A, 755B, 7500 Replaces Ford OEM nos 87801220, F2NN6200EA, E9NN6200DA, E8NN6200AA, E4HN6200AC, E4NN6200BB, E4NN6200BA, C9NN6200C, , Compatible with New Holland Hay Cutting(s) 1118, Replaces New Holland OEM nos 3973859, 81875652, 81864273, 83973859, 83959784, 3959784, 3955929, 87770983, 502164, 83955929, 83947560, 81819490, Replaces Casting nos F2HN6205AA, Wrist Pin: 1 5/8", Tapered Wrist Pin Bushing End, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443995) $175.01

Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 8240, 8340, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, 650, 655C, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, 256 Replaces Ford OEM nos E5NN6C044A, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, 5610S, 6610S, 6640, 6810S, 7010, 7610S, 7740, 7840, 8010, 8340, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044A, 83956700, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434395) $36.01

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Push Rod, Used - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 5550, 6500, 7500, Compatible with Ford Engine(s) BSD332, BSD333, BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM nos 81813399, , Compatible with New Holland Skid Steer Loader(s) L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1118, 1499 Replaces New Holland OEM nos 81813399, , Compatible with Versatile Hay Cutting(s) 4750, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 443449) $3.86

Rocker Arm Screw - Used on Ford Tractors, 1955 and later, this screw replaces E7NN6549AA, 83963749, 87801302 (Item #: 131473) $46.80

No
Picture
Rocker Arm Shaft Support - For Ford tractor models TW10, TW20, TW30, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 5500, 5550, 6500, 7500, 8400, Replaces Ford OEM number 83952459, C7NN6531A, (Item #: 176429) $18.80

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5500, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7500, 7600, 7610, 7700, 7710, 7810, 7840, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Item #: 183437, Ref: C5NE6306A) $61.00

Engine Pistons and Sleeves

Piston and Rings .020 - Used on BSD442T Turbocharged (256 CID), (10/71-12/80), 1.625 inch piston pin, dished bowl, keystone top ring, ni-resist ring insert, Early rod. 7000, 7100, 7200, 7600, 7700. Replaces D6NN6108A-20, YTO PRKF258-020 (Item #: 166370, Ref: PRKF258-020) $119.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished straight (non-flanged) sleeve for 4.4 inch bore engines. It is used when boring non sleeved engines. Length 8.21 inches, Inside Diameter 4.4 inches and Outside Diameter 4.6 inches. Replaces 81823241, 83912946, C9NN6055A, D0NN6055B, D7NN6055A (Item #: 108763, Ref: D7NN6055A) $66.00

Piston Sleeve, 4.4 Inch Bore - This is a semi-finished flanged sleeve for 4.4 inch bore engines. Inside diameter of 4.4 inches, outside diameter 4.50 inches, Flange lip .100 inches, diameter at flange 4.738 inches and overall length is 8.21 inches. This sleeve is for boring non-sleeved engines. Block must be counterbored for sleeve flange. Replaces 83912946, 81823241, 81829308, C9NN6055A, D7NN6055A (Item #: 160021, Ref: D7NN6055AFL) $34.60

Engine Rings

No
Picture
Piston Ring Set - Standard - 4 Cylinder Set - For Ford tractor models 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models A62, 675D, 750, 755, 755A, 755B, Compatible with Ford Engine (s) BSD442T, BSD444T, 256T, 268T Replaces Ford OEM number 83905823, 81824112, 83904265, 83918842, 87295236, 87554740, DAPN6149A, DFPN6149BE, DFPN6149E, DKPN6149A, , Compatible with New Holland Hay Cutting (s) 1118, Bore: 4.4007", Ring Size: Standard, Compression Rings per Piston: (1) @ .125" and (2) @ .094”, Oil Rings per Piston: (1) @ .188", Top Groove Size: .125", Top Groove Style: Keystone Torsional Chrome 15 Degree, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .094", 3rd Groove Style: Reverse Torsional Taper Face, 4th Groove Size: .188", 4th Groove Style: Chromed Cast Iron / Coiled Spring, Sold as 4 Cylinder Piston Ring Set, Piston Ring Set - Standard - Single Cylinder use Item #: 120796, (Item #: 174324) $127.00

Exhaust System

Manifold - Vertical Exhaust for diesel model: Fits [Industrial 750, 755, 755A, 755B and 7500 All Diesel - All End Date 9/30/75] Agriculture 7000, 7100, 7200 Diesel. Replaces D1NN9430A and 81827151, 81837151 and 81824284. Gasket (part number C5NE9448B) not included. (Item #: 113733, Ref: D1NN9430A) $235.00

Muffler - For models 5610, 6610, 6710 after 1981, 7500, 750, 755 with cab. Muffler, Highest Quality. Black Enamel Finish. Replaces 83908348, 83919568, 83932274, 83910404, 83949814, 83919567, 87295250, 87704570, D5NN5230R, D9NN5230GA, D9NN5230FA, E4NN5230DA17M (Item #: 100589, Ref: E4NN5230DA) $98.00

Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 1/2 inch, overall length 38 inches. For 5110, 7000, 7100, 7200, 7600 with 4 Cylinder Diesel Engine. OEM part numbers D5NN5230V, D9NN5230FA. Use MC212 clamp. Use R1802 rain cap. (Item #: 100589, Ref: R1633) $98.00

Muffler - Vertical Exhaust. Inlet inside diameter 2 3/8 inch. Outlet outside diameter 2 1/2 inch. Overall Length 36 inches. For 7000, 7100, 7200 with 4 Cylinder Diesel Engine. Uses R1753 Clamp, Uses R1802 Rain Cap. (R1634) (Item #: 100587, Ref: D2NN5230A) $81.00

Fuel System / Air Intake

Air Filter, Outer - For tractor models (550, 555 from 1975 to 7/1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4/1976 and later). Measures 11.45 inches long, 5.30 inch outside diameter, 3.03 inch inside diameter. Replaces D5NN9601A, D5NN9601B, D6NN9601A, E6NN9601A, E9NN9601BA, 83908364, 3414560, 0003414560, AZA194, 9583, CR9583, 9583M, P526500, LAF8551 (Item #: 121138, Ref: D6NN9601A) $15.50

Banjo Bolt - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 420, 445, 445A, 450, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B, Replaces Ford OEM number 21470ES80, D1NN9R523A, D1NNR523A, 81825730, Replaces Case IH OEM number 81825730, D1NN9R523A, (Item #: 181440) $7.80

Foot Accelerator Control Kit - For Ford tractor models 5100, 5600, 6100, 6600, 7100, 7600, Replaces Ford OEM number D2NN9735C, 81827473, (Item #: 154927) $42.00

Friction Disc for Throttle Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Item #: 111446, Ref: C5NN518B) $2.00

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5530, 5600, 5610, 5640, 5700, 5900, 6000, 6000 Commander, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8400, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Item #: 184806, Ref: C5NN9030D) $10.30

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Item #: 183733, Ref: 1446017M91) $35.00

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Ford: 2000, 2100, 2110, 2120, 2300, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210 (Item #: 179631, Ref: D2NN9N090B) $13.10

Fuel Injections Line Set - Used on equipment with Simms in line injection pumps. This kit contains C5NE9A555F, C5NE9A556F, C5NE9A557G, C5NE9A558B. Replaces C5NE9A556B, C5NE9A557B, C5NE9A558A. Used on 5000, 5100, 5200, 5340, 5500, 5550, 5900, 6500, 7000, 7100, 7200, 7500. Verify Injection system on your tractor before ordering. (Item #: 162824, Ref: FPL300) $64.00

Fuel Injector Pipe, #3 - For Ford tractor models Super Dexta, 3000, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 5000, 5100, 5110, 5190, 5200, 5340, 5550, 5610, 5900, 6410, 6500, 6610, 6710, 6810, 7000, 7100, 7200, 7410, 7610, 7710, Compatible with Ford Construction and industrial models 750, 755, 755A, 755B, 5500, 6500, 7500, Compatible with Ford Engine (s) 256, Replaces Ford OEM number C5NE9A557G, 81814457, (Item #: 164111) $16.90

Fuel Injector, Remanufactured, C9NN9F593B - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 3000 (3 Cylinder), 3055 (3 Cylinder), 3100 (3 Cylinder), 3120 (3 Cylinder), 3150 (3 Cylinder), 3190 (3 Cylinder), 3300 (3 Cylinder), 3310 (3 Cylinder), 3330 (3 Cylinder), 3400 (3 Cylinder), 3500 (3 Cylinder), 3550 (3 Cylinder), 5000 (4 Cylinder), 5100 (4 Cylinder), 5190 (4 Cylinder), 5200 (4 Cylinder), 5340 (4 Cylinder), 7000 (4 Cylinder), 7100 (4 Cylinder), 7200 (4 Cylinder), 8000 (6 Cylinder), 8200 (6 Cylinder), 8400 (6 Cylinder), 8600 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9200 (6 Cylinder), 9600 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models A62, A64, A66, Replaces Ford OEM number C9NN9F593B, C9NN9F595A, C9NN9F593BR, For a New version of this sku use Item #: 119912, (Item #: 210595) $87.01

Fuel Lift Pump Repair Kit - Used to repair original equipment fuel lift pumps on Ford / New Holland models: 2150, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4600, 5000, 5100, 5110, 5200, 532, 5340, 5500, 5550, 5610, 5900, 6410, 650, 6500, 655, 655A, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 750, 7500, 755, 755A, 755B, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, Major, Super Major, TW10, TW15, TW20, TW25, TW30, TW35, TW5. This repair kit replaces OEM numbers 81458909, 500093, 693F9K340AA, B1016 (Item #: 172699, Ref: 693F9K340AA) $20.60

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. (Item #: 172699, Ref: S40569) $20.60

Fuel Transfer Pump - Lift Pump, 2-bolt. Mounts to Injection Pump. For Super Major (8-1961/1964), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Transfer Pump. Used on 3, 4 and 6 Cylinder Diesel Engines. Replaces: 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. Uses S40569 Repair Kit. (Item #: 106200, Ref: D8NN9350AB) $22.50

No
Picture
Injection Line - #1 Cylinder - For Ford tractor models 5000 (1/65-later with Simms In-Line Injection Pump), 5100 (1/65-later with Simms In-Line Injection Pump), 5200 (1/65-later with Simms In-Line Injection Pump), 5900 (5/1/85-later), 7000 (1/65-later with Simms In-Line Injection Pump), 7100 (1/65-later with Simms In-Line Injection Pump), 7200 (1/65-later with Simms In-Line Injection Pump), Compatible with Ford Construction and industrial models 5500 (1/1/67-later), 5550 (1/1/67-later), 6500 (1/1/73-9/30/75), 7500 (1/1/73-9/30/75), Compatible with Ford Engine (s) 256, Replaces Ford OEM number C5NE9A555F, 81814453, 87762780, (Item #: 171584) $16.90

No
Picture
Injection Line - #2 Cylinder - For Ford tractor models 2000 (3 cyl, 1/65-12/74), 2100 (3 cyl, 3/65-12/74), 2110 (3 cyl, 1/65-12/74), 2120 (3 cyl, 1/65-12/74), 2300 (3 cyl, 1/65-12/74), 2310 (3 cyl, 1/65-12/74), 3000 (3 cyl, 1/65-12/74), 3055 (3 cyl, 1/65-12/74), 3100 (3 cyl, 1/65-12/74), 3110 (3 cyl, 1/65-12/74), 3120 (3 cyl, 1/65-12/74), 3150 (3 cyl, 1/65-12/74), 3190 (3 cyl, 1/65-12/74), 3300 (3 cyl, 1/65-12/74), 3310 (3 cyl, 1/65-12/74), 3330 (3 cyl, 1/65-12/74), 3400 (3 cyl, 1/65-9/75), 3500 (3 cyl, 1/65-12/74), 3550 (3 cyl, 1/65-12/74), 4000 (3 cyl, 1/65-12/74), 4100 (3 cyl, 1/65-12/74), 4110 (3 cyl, 1/65-12/74), 4140 (3 cyl, 1/65-12/74), 4190 (3 cyl, 1/65-12/74), 4200 (3 cyl, 1/65-12/74), 4330 (3 cyl, 1/65-12/74), 4340 (3 cyl, 1/65-12/74), 4400 (3 cyl, 1/65-12/74), 4410 (3 cyl, 1/65-12/74), 4500 (3 cyl, 1/65-12/74), 5000 (4 cyl, 1/65-1/75), 5100 (4 cyl, 1/65-12/74), 5190 (4 cyl, 1/65-12/74), 5200 (4 cyl, 1/67-12/74), 5340 (4 cyl, 6/68-12/74), 7000 (4 cyl, 10/71-12/74), 7100 (4 cyl, 10/71-12/74), 7200 (4 cyl, 10/71-12/74), Replaces Ford OEM number C5NE9A556D, Ford #2 injector line, Fits 3 cylinder engines with CAV fuel injection pump, Fits some 4 cylinder engines with CAV fuel injection pump, (Item #: 169914) $17.90

No
Picture
Injection Line - #2 Cylinder - For Ford tractor models 5000 (1/65-later with Simms In-Line Injection Pump), 5100 (1/65-later with Simms In-Line Injection Pump), 5200 (1/65-later with Simms In-Line Injection Pump), 5900 (5/1/85-later), 7000 (1/65-later with Simms In-Line Injection Pump), 7100 (1/65-later with Simms In-Line Injection Pump), 7200 (1/65-later with Simms In-Line Injection Pump), Compatible with Ford Construction and industrial models 5500 (1/1/67-later), 5550 (1/1/67-later), 6500 (1/1/73-9/30/75), 7500 (1/1/73-9/30/75), Compatible with Ford Engine (s) 256, Replaces Ford OEM number C5NE9A556F, C5NE9A556B, 81814454, (Item #: 171586) $17.30

No
Picture
Injection Line - #4 Cylinder - For Ford tractor models 5000 (1/65-later with Simms In-Line Injection Pump), 5100 (1/65-later with Simms In-Line Injection Pump), 5200 (1/65-later with Simms In-Line Injection Pump), 5900 (5/1/85-later), 7000 (1/65-later with Simms In-Line Injection Pump), 7100 (1/65-later with Simms In-Line Injection Pump), 7200 (1/65-later with Simms In-Line Injection Pump), Compatible with Ford Construction and industrial models 5500 (1/1/67-later), 5550 (1/1/67-later), 6500 (1/1/73-9/30/75), 7500 (1/1/73-9/30/75), Compatible with Ford Engine (s) 256, Replaces Ford OEM number C5NE9A558B, (Item #: 171589) $17.60

Injector - New Fuel Injector. For tractor models: 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4400, 4500, 5500, 5550, 4000, 4000SU, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4410, 5000, 5100, 5190, 5200, 5340, 7000, 7100, and 7200. Uses C5NE9F596A seal and washer set, not included. Replaces C5NE9F593B, C5NE9F595A, C5NE9F595B, D0NN9F593AR, D0NN9F593ARDS, 81825599. (Item #: 119903, Ref: D0NN9F593A) $47.00

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $11.30

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Fuel Sending Unit - For tractor models 5000, 5100, (5110, 5610, 5900, 6410, 6610, 6810, 7610, before 11/1983), 5600, 6600, 7000, 7100, 7600. Used on Tank D8NN9002HA. C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal, each sold separately. Replaces C5NN9A316A, D8NN9A316DA, D8NN9A316DB, D8NN9A316JA, D8NN9A3316DB, 81805895, 83914076, 83917491, 83917697 (Item #: 119734, Ref: D8NN9A316JA) $47.90

Fuel Sending Unit Lock Ring Seal - This Fuel Sending Unit Lock Ring Seal is used with C5NN9N283A Lock Ring and on tanks E2NN9002BA, C5NN9002AC and D8NN9002HA. Replaces original part number E2NN9276AA (Item #: 178193, Ref: E2NN9276AA) $3.80

Sending Unit Lock Ring - For various fuel tanks such as E2NN9002BA, C5NN9002AC and D8NN9002HA which use a lock ring to secure the fuel sender (like the D8NN9A316KA). Fits many Ford Models, 1965 and later. Order Seal E2NN9276AA separately if needed. Replaces C5NN9N283A, 81811218. (Item #: 152001, Ref: C5NN9N283A) $4.80

Hitch / Drawbar

Castle Nut - This is a 1 inch UNF Thread Castle Nut. It is used with E4NNF537AA Lower Link Pin and other applications where a 1 inch UNF thread Castle Nut is needed. It replaces 390767S36, 83958917, 14H920 (Item #: 158239, Ref: 390767S36) $3.90

Draft Control Plunger - For Ford tractor models 5000, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number D0NN541A, 81823982, (Item #: 155007) $44.80

Draft Control Plunger - For Ford tractor models 5000, 5100, 5200, 5340, 7000, 7100, 7200, Replaces Ford OEM number C5NN541B, (Item #: 155008) $19.33

Draft Control Yoke - Long - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Replaces Ford OEM number D2NN546A, 81827128, (Item #: 155009) $78.00

Draft Control Yoke - Short - For Ford tractor models 5000, 5100, 5200, 5340, 7000, 7100, 7200, Replaces Ford OEM number C5NN546B, (Item #: 155010) $46.20

Drawbar Clevis Spring Pin - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2100, 2110, 2111, 2131, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3150, 3230, 3300, 3310, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4031, 4120, 4130, 4131, 4200, 4330, 4340, 4400, 4410, 4500, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 4140, Compatible with Ford Baler (s) 530, Replaces Ford OEM number 311920, 81813066, (Item #: 115372) $1.20

Hydraulic Cylinder Piston - For Ford tractor models TW5, TW15, TW25, TW35, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, Replaces Ford OEM number D5NN530A, (Item #: 155012) $38.90

Hydraulic Lift Rocker - For Ford tractor models 5000, 5100, 5110 (2 pin), 5200, 5340, 5600, 5610, 5700, 6600, 6610 (2 pin), 6700, 6710 (2 pin), 6810 (2 pin), 7100, 7200, 7410 (2 pin), 7600, 7610 (2 pin), 7700, 7710 (2 pin), 7810, 7910, 8210, Replaces Ford OEM number E0NN535DA, For models with 2 speed PTO, (Item #: 162982) $109.00

Hydraulic Lift Rod - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, 8240, 8340 Replaces Ford OEM number C7NN526D, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number 81817891, (Item #: 155016) $37.30

No
Picture
Leveling Arm - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7810, 7910, 8210, Replaces Ford OEM number C5NNB863C, C7NNA935C, Left hand, Adjusts from 25" to 31", Catagory 2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115657) $123.00

No
Picture
Leveling Arm - For Ford tractor models 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, Replaces Ford OEM number 81802073, C5NNB863C, E0NNA935AA, Left hand, Adjusts from 28" to 34", Catagory 2, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115659) $95.00

No
Picture
Lift Arm - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number D2NN555E, C7NN555C, C7NN555K, D1NN555B, D1NN555E, Left hand / Right Hand, Category 2, Length: 35" Center to center, Additional Handling and Oversize Fees Apply To This Item, (Item #: 122630) $78.00

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.70

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

Lower Lift Link Pin - Replaces original part number 83949240, E4NNF537AA. It uses 390767S36, 1 inch UNF Thread Castle Nut, not included. (Item #: 170281, Ref: E4NNF537AA) $29.20

Pin - For Ford tractor models 5000, 5100, 5110 (4 Cylinder), 5200, 5600, 5610 (4 Cylinder), 5900 (4 Cylinder), 6600, 6610, 6700, 6710 (4 Cylinder), 6810 (4 Cylinder), 7100, 7200, 7410 (4 Cylinder), 7600, 7610 (4 Cylinder), 7700, 7710 (4 Cylinder), 7810 (6 Cylinder), 7910 (6 Cylinder), 8000 (6 Cylinder), 8200 (6 Cylinder), 8210 (6 Cylinder), 8600 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9200 (6 Cylinder), 9600 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models 8400 (6 Cylinder), Replaces Ford OEM number C5NNN936A, 83976556, (Item #: 170276) $13.30

Pin, Lift Link, Lower - For Ford tractor models 2810, 2910, 3000, 3055, 3230, 3430, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 420, 515, 532, 535, 3550, 4400, 4500, Replaces Ford OEM number C0NNC893A, 81812094, 3/4" x 2-1/2", (Item #: 170308) $21.10

Stabilizer Chain Assembly - For Ford tractor models 3055, 4600, 5000, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, Replaces Ford OEM number 81813319, CFPND36B, 87554774, VPL3205, VPL3225, Adjustment Length: 3", Closed Length: 24", (Item #: 152140) $32.70

Stabilizer Pin - For Ford tractor models 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3430, 3500, 3910, 3930, 4000, 4110, 4130, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 340, 340A, 340B, 445, 515, 532, 540, 545, Replaces Ford OEM number C5NNN873B, 81813606, (Item #: 166191) $9.80

Stabilizer Pin - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3910, 4000, 4000SU, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Replaces Ford OEM number C5NNN873A, 81802085, Pin Diameter: 7/8", Working Length: 1/2", Thread Length: 1-3/16", (Item #: 168888) $11.00

Telescopic Bar Hole Stabilizer, Right Hand - For Ford tractor models 600, 700, 2310, 2600, 2610, 2810, 2910, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4200, 4600, 4610, 5000, 5100, 5110, 5200, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8100, 8200, 8210, 8600, 8700, 9200, 9600, 9700, Replaces OEM number FTS15610, Max Length: 28 -3/4", Min Length: 18 -5/16", Additional Handling and Oversize Fees Apply To This Item, (Item #: 169818) $112.00

Top Link Ball End - Cat. II Left Hand threaded repair end. 1 1/4 Inch Left Hand Thread, 1 Inch Ball ID, 13 Inch Overall Length. Replaces DONNA914B, 82001389 (Item #: 168087, Ref: D0NNA914B) $55.65

Turnbuckle - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3430, 3600, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5010, 5030, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Compatible with Ford Construction and industrial models 3500, Replaces Ford OEM number E1NNR837AA, 82005860, 83933118, (Item #: 155031) $13.00

Hydraulic System

Hydraulic Filter - Hydraulic Filter is used on 5000, 5100, 5200, 5500, 7000, 7100, 7200, Major, Power Major, Super Major. Replaces 81802003, 84277202, C5NNN832C (Item #: 170936, Ref: C5NNN832C) $10.00

No
Picture
Hydraulic Lift Cover and Cylinder O-Ring Kit - 3-3/4" Piston - For Ford tractor models 5000, 5100, 5190, 5200, 7000, 7100, 7200, Replaces Ford OEM number 81825773, E2152T9, B5001, 1934245, Lift Cover and Cylinder for 3-3/4 Piston only, (Item #: 169492) $9.40

Hydraulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Item #: 113703, Ref: 957E7010) $13.20

Hydraulic Pump - For tractor models 5000, 5100, 5200, 7000, 7100, 7200. ALL with Dual Power. (Item #: 119383, Ref: D2NN600B) $465.00

Hydraulic Pump - Fits 5000, 5100, 5200, 7000, 7100, 7200 all 1965-1975 with transmission mounted pump. Hydraulic Pump. Gear style unit, trans mount, less dual power. 28 GPM at 2000 RPM. (Item #: 104226, Ref: D0NN600G) $300.00

Hydraulic Pump - For tractor models 5100, 5600, 5610, 6600, 6610, 6710, 7100, 7600, 7610, 7700, 7710, 7810, 7910, 8210, all with transmission mounted, Gear Type Pump. Also replaces E0NN600AB. Hydraulic Pump. (Item #: 103150, Ref: E0NN600AC) $380.00

Hydraulic Pump - Dynamatic - For Ford tractor models 5000, 5100, 5200, 7000, 7100, 7200, Replaces Ford OEM number D0NN600G, 81823983, 87540836, D0NN600G-E, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 104226, (Item #: 157617) $720.00

No
Picture
Hydraulic Pump - Dynamatic - For Ford tractor models 5000, 5100, 5200, 7000, 7100, 7200, Replaces Ford OEM number D2NN600B, 81826808, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 119383, (Item #: 157702) $550.00

Hydraulic Pump Gasket - For Ford tractor models 5000, 5100, 5200, 5340, 5900, 7000, 7100, 7200, 7700, Replaces Ford OEM number 81802128, C5NN915A, 83963582, 83901199, D3NN915A, E7NN915BA, (Item #: 165041) $5.40

Hydraulic Pump, Used - For Ford tractor models 5000, 5100, 5200, 7000, 7100, 7200, Replaces Ford OEM number 81823983, D0NN600E, D0NN600G, Transmission mount, Gear style unit, 28 GPM (at 2000 RPM), For a new version of this item use Item #: 104226, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404226) $196.01

Hydraulic Pump, Used - For Ford tractor models 5000, 5100, 5200, 5340, 7000, 7100, 7200, Replaces Ford OEM number D2NN600B, 81826808, VPK1013, Tractors with dual power, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For a new version of this item use Item #: 119383, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 419383) $290.01

Hydraulic Relief Valve - For tractor models 2000, 3000, 4000, 5000, 6000 (1965-1975). This valve is for piston or gear type in center housing. Replaces C7NN638E, 81818413 (Item #: 157746, Ref: C7NN638E) $53.00

Hydraulic Valve Seal Kit - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 681, 700, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230 (no cab), 3300, 3310, 3330, 3400, 3430 (no cab), 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130 (no cab), 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830 (no cab), 5000, 5030 (no cab), 5100, 5200, 5340, 7000, 7100, 7200, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 335, 530A, 531, 3550, 4140, 4400, 4500, Replaces Ford OEM number 83900081, (Item #: 161249) $3.20

Lift Cylinder Safety Valve - This Lift Cylinder Safety Valve has 3/4 x 16UNF Right Hand Threads. It is used on Ford / New Holland 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TS100, TS90, TW15, TW25, TW35, TW5. Replaces 81838679, D3NN984C, D5NN984A, 83911832 (Item #: 170948, Ref: D5NN984A) $40.70

Rock Shaft Bushing - This Rock Shaft Bushing is used on FORD 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710, 5640, 6640, 7740, 7840, 8240, 8340. Associated seal is part number C5NNC944A and is sold separately. Replaces C5NN531A, E2NN531AA, 83933328. (Item #: 170952, Ref: E2NN531AA) $10.50

Rockshaft Seal - This Rockshaft Seal is used with E2NN531AA Bushing. (Item #: 180345, Ref: C5NNC944A) $2.70

No
Picture
Valve Assembly - Blue - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 6710, 7000, 7100, 7200, 7600, 7700, 7710, Replaces Ford OEM number C7NN488J, C7NN481E, C7NN488H, 82847532, 81819038, 81819039, 81819030, Valve Assembly - Blue, (Item #: 170943) $111.00

No
Picture
Valve Assembly - Green - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C7NN481G, C7NN418G, DDN481E, C7NN488M, C7NN488N, C5NN488T, 81819043, 81819032, 81819042, Valve Assembly - Green, (Item #: 170945) $83.00

No
Picture
Valve Assembly - White - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819036, C5NN488L, 81819029, 81819037, 82847531, 82847550, C7NN481D, C7NN488G, C7NN488F, Valve Assembly - White, (Item #: 170942) $86.00

No
Picture
Valve Assembly - Yellow - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 5000, 5100, 5200, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 81819031, 81819040, 81819041, 82847559, C5NN488N, C7NN488L, C7NN488K, C7NN588K, C7NN481F, Valve Assembly - Yellow, (Item #: 170944) $86.00

Lights

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Item #: 111329, Ref: FAA13102A) $6.10

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $18.50

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $27.40

Miscellaneous

No
Picture
Drive Clutch Piston Spring Retainer Snap Ring - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 501, 541, 600, 601, 611, 620, 621, 631, 641, 651, 661, 671, 681, 700, 800, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3600, 4000, 4000SU, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600, 5000, 5100, 5110, 5200, 5600, 5610, 5610S, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8200, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3500, 3550, 4400, 4500, 8400 Replaces Ford OEM number PBB77517A, , Compatible with New Holland tractor models TB100, TB110, TS90, TS100, TS110, TS115, TV140, TV145, Replaces New Holland OEM number PBB77517A, (Item #: 176669) $5.40

Hydraulic Shaft - For Ford tractor models 5000, 5100, 5110, 5200, 5340, 5600, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7700, 7710, 7810, 7910, 8210, Replaces Ford OEM number 81801593, C5NN544B, (Item #: 119855) $107.55

Lift Arm - Left - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C5NN839F, E3NN839AA, (Item #: 154997) $91.00

Lift Arm - Right - For Ford tractor models 5000, 5100, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number C5NN838F, E3NN838AA, (Item #: 154995) $91.00

Shift Top with Levers - For Ford tractor models 5000, 5100, 5110, 5190, 5200, 5340, 5550, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610, Replaces Ford OEM number C5NN7222R, E4NN7222AA, E4NN7222AA20M, (Item #: 153640) $291.90

Oil System

Dipstick, Engine Oil - Length is approximately 10 inches overall length and 6 1/2 inches from the base of cap to end. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3190, 3300, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 5500, 650, 6500, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B. (Item #: 165076, Ref: C5NE6750D) $9.00

Filter Adapter, Spin-On - With seal. Fits (2000, 3000 and 4000 series 3 cylinder), (5000 4 cylinder) (tractors from 1965 to 10/1969). For use with spin on filter E7NN6714AA. (Item #: 113542, Ref: 309825) $34.10

No
Picture
Ford, C7NN6A605A, 81817359, Used - For Ford tractor models TW5, TW10, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4610SU, 4830, 5000, 5030, 5100, 5190, 5200, 5340, 5550, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 230A, 231, 233, 234, 250C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 675D, 750, 755, 755A, 755B, 5500, 6500, 7500, Compatible with Ford Engine(s) 158, 175, 192, 201, 233, 256, 268, 401 Replaces Ford OEM number C7NN6A605A, 81817359, C7NN6A605, , Compatible with New Holland Skid Steer Loader(s) L783, L785, LS180, Compatible with New Holland Hay Cutting(s) 907, 909, 910, 912, 1100, 1112, 1114, 1118, 1495, 1499, For a new version of this item use Item #: 169650, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 444465) $6.01

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825. (40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

No
Picture
Oil Pan - Cast - For Ford tractor models 4000, 5000, 5030, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 650, 750, 755, 755A, 755B, 5500, 6500, 7500, Replaces Ford OEM number E2NN6676AA, 87800105, 87546750, 83936297, 500444, 81825236, C9NN6676E, D1NN6676A, Drain plug not included, (Item #: 140614) $417.00

$Ford 7100 Pump Gear\Shaft Assembly$
Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: TW5, TW15, TW25, TW35, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, 230A, 233, 234, 250C, 260C, 333, 334, 335, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 550, 555, 555A, 555B, 555C, 555D, 650, 655, 655A, 655C, 655D, 750, 755, 755A, 755B. Replaces E9NN6A820AA, 87800008, C7NN6A820C, D3NN6A820E, 3984954, 81845748, 73345660, 81822957, 81837148, 83984954, 81843777, 81834095, D3NN6A820F, D3NN6A820G, C7NN6A820A, D0NN6A820A, C7NN6A820B, D3NN6A820A, D3NN6A820D, 87764586, 87764587, 81859340, 81844832, 81845749, 81818742, 87763956, D3NN6A820B (Item #: 140555, Ref: E9NN6A820AA) $32.40

PTO / Driveline

Clutch Pack Assembly, Independent PTO - Includes 3 Discs and 3 Plates. For tractor models 5000, 7000. Replaces D5NNN751D, D5NNN751A, D3NNN786A, D3NNP743A, D5NNN751B, D3NNN751D, C3NN7D211A, PBB77573A, C0NN7B421A, 83908229, E3NN7R007AA, 373227S. (Item #: 152062, Ref: D5NNN751D) $234.00

Idler Gear Support - Hydraulic Pump Idler Gear Support part number C7NN7049D has a 2.999 inch bearing outside diameter. The tube is 2.060 inches in length. It is used on the following, all 01/01/1965 through 04/30/1971: 5000, 5100, 5200, 7000, 7100, 7200, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710 It replaces original part number C7NN7049D C7NN7N085B, D9NN7N087A. (Item #: 179989, Ref: C7NN7049D) $45.60

Idler Gear Support - Hydraulic Pump Idler Gear Support part number C7NN7049D has a 2.890 inch Bearing outside diameter. The tube is 1.610 inches in length. This is used on (5000, 5100, 5200, 7000, 7100, 7200, All 05/01/1971 and up) 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, 6710, 7710. Replaces C9NN7049C. (Item #: 170969, Ref: C9NN7049C) $72.00

PTO Cap - This PTO Cap is 4 inches long. It will not work on 5 inch PTO shafts. It has 65mm outside threads. It replaces OEM numbers: C5NN726B C5NN726A, SBA378110020, 81801856, 47811118 (Item #: 155020, Ref: C5NN726A) $22.60

PTO Drive Clutch Housing - Is some applications require replacing OE C9NN7R007A with OE D5NN7R007A when used with single speed PTO. Used on 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5700, 5900, 6600, 6700, 7000, 7100, 7200, 7600, 7700. This part replaces Ford New Holland part numbers: D5NNN707A, D5NNN07A, 83903939, 81827131 (Item #: 151874, Ref: D5NNN707A) $248.00

PTO Drive Clutch Valve - This PTO Drive Clutch Valve is used C7NNN776C PTO Shaft Support on Ford 5000, 5100, 5190, 5200, 5340, 7000, 7100, 7200. Replaces original part numbers 81827441, C7NNN700C, D2NNN700B (Item #: 158973, Ref: D2NNN700B) $237.00

PTO Drive Hub, Used - For Ford tractor models 2000 (Single Clutch Assembly), 2100 (Single Clutch Assembly), 2110 (Single Clutch Assembly), 2120 (Single Clutch Assembly), 2300 (Single Clutch Assembly), 3000 (Single Clutch Assembly), 3055 (Single Clutch Assembly), 3100 (Single Clutch Assembly), 3110 (Single Clutch Assembly), 3120 (Single Clutch Assembly), 3190 (Single Clutch Assembly), 3300 (Single Clutch Assembly), 3310 (Single Clutch Assembly), 4000 (Single Clutch Assembly), 4100 (Single Clutch Assembly), 4110 (Single Clutch Assembly), 4140 (Single Clutch Assembly), 4190 (Single Clutch Assembly), 4200 (Single Clutch Assembly), 4330 (Single Clutch Assembly), 4340 (Single Clutch Assembly), 5000 (Single Clutch Assembly), 5100 (Single Clutch Assembly), 5110 (Non Sync), 5190 (Single Clutch Assembly), 5200 (Single Clutch Assembly), 5340 (Single Clutch Assembly), 5610 (Non Sync), 6610 (Non Sync), 6710 (Non Sync), 6810 (Non Sync), 7000 (Single Clutch Assembly), 7100 (Single Clutch Assembly), 7200 (Single Clutch Assembly), 7600, 7610 (Non Sync), 7700, 7710 (Non Sync), 7810 (Non Sync), Replaces Ford OEM nos E2NNN777AA, 81801947, C5NNN777A, C5NNN778A, Internal Splines: 15, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498500) $95.01

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Item #: 179414, Ref: C5NN7086A) $4.50

PTO Output Shaft Seal - Note that two size seals were used on the output shaft on many of the models listed. Verify measurements or OEM number before ordering. This seal measures 74.62mm inside diameter x 95.24mm outside diameter x 9.5mm wide (3.75 inches x 2.85 inches x 0.375 inches wide). Used on Ford 3600, 4600, 5000, 5100, 5110, 5190, 5200, 532, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8010, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces Ford / New Holland part numbers D9NNN710BB, D9NNN710B, 83944032 (Item #: 189274, Ref: D9NNN710B) $15.20

PTO Piston Return Spring - Replacing Ford / New Holland part numbers 81871420, 83935173, C0NN7C151A, 9823824, D7NNC732A, 81804819, this Spring is used in tractors with independent PTOs. Used on Ford / New Holland models: 5000, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9600, 9700, TS100, TS90, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Item #: 124549, Ref: D7NNC732A) $19.50

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 Speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600, 7700, all with 2 speed after 1975). PTO Shaft 540 RPM. 11.475 inches Long. 36 and 38 tooth splines. (Item #: 109834, Ref: D2NNB728A) $95.00

PTO Shaft - For tractor models (5100, 5200, 7100, 7200, all with 2 speed after 6/1973), (8000, 9000, both with 2 speed 1968-1978), (5600, 5700, 6600, 6700, 7600 both with 2 speed 1975 and later). PTO Shaft 1000 RPM. 11.475 inches long, 38 tooth splines on tractor side, 21 splines on implement side. Replaces D2NNB728B, C7NNB728E, 81827171 (Item #: 110628, Ref: D2NNB728B) $202.00

PTO Shaft - For tractor models 5100, 5200, 7100, 7200, (5000, 7000 both with ind. PTO 1965-1973). PTO Shaft 540 RPM. 10.89 inches long, 29 Tooth Drive Splines. Replaces D2NNN752AA, D2NNN752C, D2NN-N752C, 81827062. (Item #: 111992, Ref: D2NNN752C) $83.00

PTO Shaft - For tractor models (5110, 5610, 5900, 6410, 5410 UK, 6610, 6710, 6810, 7610, 7710, all with single speed PTO 10/1989 and later), (5640, 6650, 7740 all with single speed 11/1990 and later). PTO Shaft 540 RPM. 11.764 inches long, 28 tooth drive splines. (Item #: 111990, Ref: E8NN710AA) $335.00

PTO Shaft - For 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, all less sync trans. PTO Shaft 39.87 inches long, 20 and 25 spline. (Item #: 111991, Ref: E1NN7A684AB) $157.00

PTO Shaft Seal - This new PTO Shaft Seal fits the following tractors with single speed PTO's: 5000, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7600, 7610, 7700, 7710. It has an inside diameter of 1.42 inches (36.07 mm), outside diameter of 2.5 inches (63.65 mm) and a thickness of 0.30 inch (7.84 mm). It replaces original part numbers C5NN701B, C5NN710B, C5NNN710A, C5NNN710B, D9NNN710CA, D9NNN710DA, 81819064. (Item #: 164442, Ref: C5NN710B) $4.70

PTO Shaft Support - Support, for PTO Shaft and Drive Clutch Valve. DOES have relief oil hole in support. For tractor models 5000, 5100, 5200, 7000, 7100, 7200. Replaces C7NNN766C, C7NNN776C, E7NNN776C, 81818776. (Item #: 111896, Ref: C7NNN776C) $24.00

Seats

Seat Back - Blue Vinyl on steel For 4330, 4340, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6810, 7000, 7100, 7200, 7600, 7610, 7700 with Custom Deluxe Seat. mounting bolts 10 3/8 inches apart on back. (Item #: 178475, Ref: R0862) $298.00

Seat Cushion, Black - This Black Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces D1NNA405B, D2NNA405B, D2NNA405BAK, E2NNA405AA99B. (Item #: 101228, Ref: E2NNA405AA99M) $108.00

Seat Cushion, Blue - This Pan and Cushion Assembly for deluxe suspension seat fits tractor models: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces C7NNA405R, D0NNA405C, D1NNA405A, D1NNA405B, D2NNA405B, D2NNA405BAK, D8NN400BABB, E2NNA405AA99B, E2NNA405AA99M, E7NN400GA, E7NN420AA. (Item #: 101227, Ref: E2NNA405AA99MBL) $100.00

Suspension Seat - New Ford/New Holland replacement seat. Complete seat with suspension, blue. Fits Ford / New Holland Compact tractor models: 1110, 1210, 1310, 1510, 1710, 1910; Fits Industrial/Construction models: 340A, 340B, 345D, 3500, 445, 445A, 445C, 445D, 450, 515, 540A, 540B, 545A, 545C, 545D; Tractor models: 2100, 2110, 2120, 2150, 2300, 231, 2310, 234, 2600, 2810, 2910, 3000, 3055, 3100 3300, 3310, 3330, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 5000, 5100, 5200, 531, 532, 5600, 5900, 6600, 6700, 7000, 7100, 7200. There is a plate on the bottom that is 4 inches wide and 8 1/4 inches long. In the center of this plate are 2 slots that are 3/8 inches wide, 1/4 inch from each edge and 1/2 inch apart and they are about 4 inches long. Overall width is 19.5 inches, overall length of base is 15.25 inches, overall height of base is 9.25 inches. (Item #: 101226, Ref: CSA698-8V) $215.00

Sheet Metal / Body Parts

Front Bumper - Frame Mount - For Ford tractor models 4000, 4500, 5000, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610, Replaces Ford OEM number C5NN17750C, 8391579, 87045743, Frame mount, Measurements 21-1/8 " inside bracket to inside bracket, Bolt Hole Pattern 4 " on C to C, Comes primered (color may vary). Prior to painting check fitment, Additional Handling and Oversize Fees Apply To This Item, (Item #: 109631) $135.00

Grill, Front, with Inset Headlights - For tractor models (2000, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3500, 3550, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4500, 5000, 5100 all built between 1/1965 to 12/1974), (2150 from 1/1970 to 12/1974), (3400 from 1/1965 to 9/1975), (4410 from 1/1969 to 12/1974), (5340 from 6/1968 to 12/1974), (7000, 7100, 7200 from 10/1971 to 12/1974). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 160785, Ref: D1NN8151B) $34.70

Hood - Hood Panel, engine left hand side, Vertical Exhaust, without cab. 41 3/4 inches long. For 5100, 5110, 5600, 5610, 5900, 6400, 6410, 6600, 6610, 7100, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155812, Ref: D5NN16626B) $73.00

Hood Latch - Right Hand - For Ford tractor models Dexta, Power Major, Super Dexta, Super Major, 2000, 3000, 4000, 5000, 7000, 7100, 7200, Replaces Ford OEM number 85700110, E1ADKN16658, DKN16658, Without Handle, Fits Right Hand Side, (Item #: 163647) $14.30

Hood, RH - 41.750 inches long. For tractor models 5100, 5600, 6600, 7100, 7600. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155815, Ref: D5NN16N768B) $78.00

Instrument Panel - For tractor models 2310, 2600V, 4110, 420, 4400, 4410, 445, 4500, 4610SU, 5100, 5110, 515, 531, 532, 535, 540, 540A, 545, 5600, 5610, 5900, 6600, 6610, 6810, 7100, 7600, 7610, (2110 from 1965 to 1975). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 172723, Ref: D8NN16948DB) $280.00

Steering Sector Cover - For Ford tractor models 3120, 4000, 5100, 5600, 6600, 7100, 7600, Replaces Ford OEM number C7NN3R654A, 81822068, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 159308) $100.00

Step Plate Set - Step plate with running board set. Fits Ford tractors 5000, 5100, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610. Replaces D5NN16472C, D4NN16472C, D3NN16473C, 83907222, 87769508, 87764817 (Item #: 140506, Ref: D3NN16473C) $390.00

Tool Box - For Ford tractor models Dexta, FW20, FW30, FW40, NAA, Super Dexta, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 256V, 611, 621, 631, 651, 850, 851, 861, 901, 941, 950, 951, 961, 971, 981, 1000, 1100, 1110, 1120, 1200, 1210, 1215, 1220, 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1700, 1710, 1715, 1720, 1800, 1900, 1910, 1920, 2000, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2250, 2255, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3320, 3330, 3400, 3415, 3420, 3430, 3500, 3510, 3600, 3610, 3830, 3900, 3910, 3930, 4000, 4030, 4031, 4100, 4110, 4120, 4121, 4130, 4131, 4190, 4200, 4230, 4330, 4340, 4400, 4410, 4430, 4500, 4600, 4610, 4630, 4635, 4830, 4910, 5000, 5010, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 5910, 6000, 6010, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7400, 7410, 7530, 7600, 7610, 7700, 7710, 7740, 7800, 7810, 7840, 7910, 8000, 8100, 8200, 8210, 8240, 8340, 8400, 8530, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8870, 8970, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A64, A66, 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 345, 345C, 345D, 420, 445, 445C, 445D, 450, 455, 515, 530A, 531, 532, 535, 540, 541, 545, 545C, 545D, 550, 555, 575, 655, 675, 755, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 3550, 4010, 4040, 4140, 5500, 5550, 6500 Replaces Ford OEM number C5NN17005F11M, 81844199, 83935318, C5NN17005F, C5NN17005FFD, D3NN17005B, , Compatible with New Holland tractor models TC18, TC25, TC27, TC29, TC30, TC33, TC35, TC40, TC45, TG210, TG230, TG255, TG285, TJ275, TJ325, TJ375, TJ425, TJ450, TJ500, TN55, TN55D, TN65, TN65D, TN65F, TN70, TN70D, TN70F, TN75, TN75D, TN75F, TN80F, TN90F, TN95F, TS90, TS100, TS110, 1530, 1630, 1725, 1925, 4835, 5635, 7010, 7635, 8010, 8160, 8260, 8360, 8560, Fender Mount, Blue Tool Box, 16" x 4" x 4", Comes primered (color may vary). Prior to painting check fitment, (Item #: 112634) $30.00

Steering

Axle Pin, Front - This Heavy Duty Front Axle Pin is threaded. 1.750 inch outside diameter, 4.71 inch long, 4.00 inch usable length. For the following models built after 7/1958: 601, 701, 801, 901, 2000, 2100, 2600, 2610, 2810, 2910, 3100, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5100, 5600, 5610, 6600, 6610, 7100, 7600, 7610. Uses C5NN3128B Flange. (Item #: 172932, Ref: 312659) $73.00

Axle Pin Locking Plate - This locking plate is used with 312659 Pin. Replaces C5NN3128B. (Item #: 153968, Ref: C5NN3128B) $12.00

Axle Pivot Pin Bushing - For Ford tractor models TW10, TW20, TW30, 3500, 4400, 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740, 8000, 8240, 8340, 8600, 8700, 9000, 9600, 9700, Compatible with Ford Construction and industrial models 3550, Replaces Ford OEM number C5NN3446A, 81802940, 81941357, 1.50" O.D., 1.247" I.D., 1.375" Long, Rear Bushing, (Item #: 111730) $3.20

Bushing - Steering Rocker Shaft - For Ford tractor models Super Major, 2000, 2600, 3000, 3600, 5100, 5110, 5600, 5610, 5900, 6410, 6610, 7100, Replaces Ford OEM number C5NN3N652A, E27N3109A, E27N3110A, 81717388, 81717391, 81803198, 81803202, 87295840, O.D.: 1.625", I.D.: 1.498", Length: 2.0", (Item #: 146687) $8.40

Center Arm Shaft - For Ford tractor models 5100, 5340, 7100, Compatible with Ford Construction and industrial models 535, 4400, 4500, Replaces Ford OEM number D1NN3N703A, Length: 4.090", Outside Diameter: 1.494", (Item #: 163781) $105.00

Drag Link Assembly - Front - For Ford tractor models 5000, 5100, 5340, 7000, 7100, Replaces Ford OEM number C5NN3304U, Length 51.250", Diameter 1.250", Additional Handling and Oversize Fees Apply To This Item, (Item #: 104614) $139.00

Drag Link End - Front - For Ford tractor models 5000, 5100, 5600, 5610, 6410, 6600, 6610 (81 with manual steering), 7000 (68 - 75), 7100 (with manual steering), 7600 (75 - 81 with manual steering), Replaces Ford OEM number C7NN3A300A, 81825395, 877554825, C5NN3A300D, Front Drag Link End, Length 7.875", Diameter .935", (Item #: 104617) $29.00

Drag Link End - Rear - For Ford tractor models 5000 (65-75 replacement thread style link used 65-12/67), 5100 (with manual steering), 5600 (71-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6600 (71-81 with manual steering), 6610 (81 with manual steering), 7000 (65-75 replacement thread style link used 65-12/67), 7100 (with manual steering), 7600 (71-81 with manual steering), Replaces Ford OEM number C7NN3304C, C5NN3304T, Length 47.500" long from center of ball joint to end, (Item #: 104615) $125.00

Drag Link End - Rear - For Ford tractor models 5000 (68-75 and 65-12/67 when replacing non thread link), 5100 (with manual steering), 5600 (75-81 with manual steering), 5610 (81 with manual steering), 6410 (with manual steering), 6610 (81 with manual steering), 7000 (68-75 and 65-12/67 when replacing non thread link), 7100 (with manual steering), 7600 (75-81 with manual steering), 7610 (with manual steering), Replaces Ford OEM number C5NN3307N, C7NN3307B, Rear Drag Link End, Length 47.500", (Item #: 104619) $76.00

Front Axle Bushing - This Front Axle Pin Bushing is used on 5000, 5100, 7000, 7100, 5600, 6600, 7600, 5610, 6610, 7610, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 3500, 4400. It has a 2.132 inch outside diameter, a 1.893 inch inside diameter and is 2 inches long. It replaces original part number C5NN3153A (Item #: 111728, Ref: C5NN3153A) $5.20

Power Steering Cylinder End - Power Steering End right hand (inner), .875 inch-14 thread female, 3.625 inches long to center of post. Tractors: 3010S, 4010S, 5100, 5110, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6710, 6810, 6810S, 7010, 7100, 7600, 7610, 7610S, 7810, 7810S, 8010. Verify Part number to ensure proper fit. (Item #: 100683, Ref: E3NN3B539AA) $32.00

Power Steering Cylinder Seal Kit - This Power Steering Cylinder Seal Kit is used on C5NN3N500C and C5NN3N500D cylnders. It contains: 86629540, C5NN3N509A, C5NN3B543A, 2 - 87149S94, C5NN3N548A, 87037S94 (C5NN3N558A), C5NN3N574A, 511836, 9849109 (Item #: 169538, Ref: CFPN3301C) $49.50

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $497.60

Power Steering Pump - This power steering pump used with flair fitting on models using Steering Gear Box, pump has Relief Valve. For tractor models 2310, 234, 2610, 2810, 2910, 3230, 334, 335, 3430, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 5100, 5600, 5610, 5900, 6600, 6610, 6710, 7100, 7600, 7610, 7710. Rated Pressure 725-1305 at 500-2000rpm. Safety valve Opening Pressure 942-1087 PSI, Safety Valve Full Open: 1087-1305 PSI. Unit designed for o-ring fitting, not supplied w/pump. This pump fits tractors with JIC fittings. Replaces 82858430, E6NN3K514PA99M (Item #: 113208, Ref: E6NN3K514PA99M) $255.00

Power Steering Pump - For tractor models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Output capacity is 1250 PSI, 4.2 gallons at 1000 RPM. Also replaces 81816585. (Item #: 114294, Ref: C7NN3A674F) $401.00

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $170.00

Power Steering Pump - Dynamatic, C7NN3A674F - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 3000 (1/65-12/74), 3100 (1/65-12/74), 3400 (1/65-9/75), 4000 (1/65-12/74), 4100 (1/65-12/74), 4110 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/65-12/74), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 7000 (10/71-12/74), 7100 (1/65-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), Compatible with Ford Construction and industrial models 535, 3500, 4500, Replaces Ford OEM number C7NN3A674F, 81816585, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 114294, (Item #: 157640) $390.00

Power Steering Pump - Dynamatic, E6NN3K514CA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (R (1/75-12/81), 2600 (N (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3600 (R (1/75-12/77), 3600 (1/75-12/81), 3600 (N (1/75-12/81), 3600 (NO, V (1/75-12/81), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600 (NO (10/75-12/81), 4600SU (1/75-7/78), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5600 (1/75-12/81), 5700 (7/78-9/80), 6600 (1/75-12/81), 6600 (O (1/75-12/81), 6600 (C (1/75-9/76), 6700 (1/75-12/80), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C (1/75-9/76), 7700 (1/75-12/80), Compatible with Ford Construction and industrial models 231 (1/75-12/81), 233 (1/75-12/81), 333 (1/75-12/81), 335 (10/75-9/78), 420 (10/75-9/78), 515 (10/75-9/78), 531 (1/75-12/81), 532 (10/75-9/78), Replaces Ford OEM number E6NN3K514CA, 83959550, 2.74 GPM, 850 PSI at 1000 RPM, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157811) $360.00

Power Steering Pump - Dynamatic, E6NN3K514EA99M, E6NN3K514EA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (N, R (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3400 (1/65-9/75), 3600 (1/75-12/81), 3600 (N, R (1/75-12/81), 3600 (NO, V (1/75-12/81), 3600 (R (1/75-12/77), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4410 (1/69-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5700 (7/78-9/80), 6600 (1/75-12/81), 6600 (O (1/75-12/81), 6600 (C (1/75-9/76), 6700 (1/75-12/80), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C (1/75-9/76), 7700 (1/75-12/80), Compatible with Ford Construction and industrial models 231 (1/75-12/81), 233 (1/75-12/81), 333 (1/75-12/81), 420 (10/75-9/78), 515 (10/75-9/78), 531 (1/75-12/81), 532 (10/75-9/78), 3500 (1/65-12/74), 3550 (1/65-12/74), 4400 (1/65-12/74), Replaces Ford OEM number E6NN3K514EA99M, E6NN3K514EA, 81822403, 83911577, 83917191, 83923736, 83924995, 83959533, 87759440, C9NN3A674D, D7NN3A674C, D8NN3K514GA, D8NN3K514GB, D8NN3K574GA, D8NN3K514GC, Replaces manufacturer number 002165, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157712) $498.00

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. Note, this kit contains 1 -Double Lip Seal. If your pump uses 2 - Single Lip Seals, use part number DHPN3A674B (Item #: 187034, Ref: 83910651) $13.60

No
Picture
Power Steering Pump, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number E6NN3K514DA, 83959532, Replaces Ford Casting nos C7NN3K514A, For a new version of this item use Item #: 170931, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457518) $291.01

Power Steering Pump, Used - For Ford tractor models 2110, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3150, 3330, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4110, 4140, 4410, 4600, 5000, 5100, 5600, 5700, 6600, 7100, 7600 (1975 to 1985), Compatible with Ford Construction and industrial models 231, 233, 333, 420, 3500, 3550, 4010, Replaces Ford OEM number E6NN3K514EA, 81822403, 83911577, 83917191, 83923736, 83924995, 83959533, 87759440, C9NN3A674D, D7NN3A674C, D8NN3K514GA, D8NN3K514GB, D8NN3K574GA, E6NN3K514EA99M, D8NN3K514GC, Replaces Mfg nos 002165, For a new version of this item use Item #: 157712, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457712) $297.01

Power Steering Seal Kit - Orbital Control Valve and Gear Box Gasket and Seal Kit. For tractor models (4000, 5000 from 7/1970 and up), 4600, 5600. 5610, 6600, 6610, 7000, 7600, 7610. NOTE If you are working on a 5600, 6600, 7600, 5610, 6610 or 7610 you will also need three E0NN3A590AA Teflon seals, sold seperately. Replaces EGPN3N503AA, C9NN3R668A, E1NN3N632AA, C9NN3N598A, C9NN3R669A, C9NN3C615A, 81803034. (Item #: 164631, Ref: EDPN3500A) $14.75

Power Steering Seal Kit - This Power Steering Seal Kit is used on steering gear assemblies. It contains (1) C9NN3747A, (1) C9NN3E614A, (2) C9NN3A590A, (2) C9NN3D624B, (1) E1NN3N632AA. Replaces EGPN3N503AA, 83957121 (Item #: 168433, Ref: EGPN3N503AA) $8.80

Power Steering Seal Kit - For Ford tractor models 4000, 4100, 5000, 5100, 7000, 7100, Replaces Ford OEM number EDPN3500A, 83936975, (Item #: 158421) $18.40

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Spindle Bushing, Bearing and Seal Kit - This Spindle Bushing, Bearing and Seal Kit contains: 2 - C5NN3109A (1 5/8 inch X 2 inch X 1 7/8 inch) Bushings, 2 - C5NN3110A (1 3/4 inch X 2 inch X 1 7/8 inch) Bushings, 2 C0NN3A299A (2 inch ID X 2 7/8 inch OD) Thrust Bearings, 2 - C0NN3A208A (1 1/2 inch X 2 inch X 1/4 inch) Dust Seals. Used on Ford New Holland 5000, 5100, 5110, 5200, 5600, 6410, 6600, 6610, 6810, 7000, 7100, 7200, 7600, 7610 (Item #: 104568, Ref: SBBSKIT05) $31.30

Spindle Bushing, Lower - This Lower Spindle Bushing is measures 2.004 inch outside diameter, 1.760 inch inside diameter, wall thickness .119 inch, 1.860 inch long. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802797, C5NN3110A (Item #: 100641, Ref: C5NN3110A) $4.70

Spindle Bushing, Upper - This Upper Spindle Bushing measures 2 inch outside diameter, 1.645 inch inside diameter, 1.856 inch long, and wall thickness .176 inches. It is used on Ford / New Holland 3010S, 4010S, 5000, 5100, 5110, 5340, 5600, 5610, 5610S, 5900, 6410, 6600, 6610, 6610S, 6810, 6810S, 7000, 7100, 7600, 7610, 7610S, 7700, 7810, 7810S, 8000, 8400, 8600, 9000, 9200, 9600. Replaces 81802792, C5NN3109A (Item #: 100640, Ref: C5NN3109A) $5.10

Spindle, Heat Treated - Left Hand - For Ford tractor models 5100, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number D6NN3106A, Dimension A: 16.000", Dimension B: 1.498", Dimension C: 1.638", Dimension D: 1.784", Dimension E: 1.625", Dimension F: .842", Left Side, Front wheel bearing kit use Item #: 100663, (Item #: 104547) $281.00

Spindle, High Clearance - LH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3106K, Length: 16", Diameter: 1.75", Stem Diameter: 1.625", Stem Diameter: .843", Fits Left Hand Side, (Item #: 161169) $450.00

Spindle, High Clearance - RH - For Ford tractor models 5100 (1/1968-later), 5200, 5340 (1/1968-later), 5600 (1/1975-10/31/75), 6600 (1/1975-10/31/75), 7000 (10/1971-12/74), 7100 (1/1968-later), 7200, 7600 (1/1975-10/31/75), Replaces Ford OEM number C5NN3105N, Length: 16", Diameter: 1.75", Stem Diameter; 1.625", Stem Diameter: 0.843", Fits Right hand side, (Item #: 160192) $593.00

Spindle Left Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the left hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100639, Ref: D2NN3106C) $319.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle, Right Hand - If you are using 10.00 x 16 inch tires on your Ford Tractor, this may be the right hand spindle you need. The measurements are A - 10.687 inches, B - 1.498 inches, C - 1.748 inches, D - 1.797 inches, E - 1.125\ inches. This spindle uses C0NN3A299A Thrust Bearing, C5NN3109A Upper Bushing, C5NN3110A Lower Bushing, -WBKFD7 Wheel Bearing Kit and 313020 Front Wheel Hub, 6 Bolt. Used on some of the following models: 3600, 4100, 4600, 5000, 5100, 5600, 6600, 7000, 7100, 7600. (Item #: 100638, Ref: D2NN3105C) $268.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures: 2 3/64 inch (51mm) inside diameter, 2 15/16 inch (75mm) outside diameter, 5/8 inch (16mm) wide. Replaces 81802870, C0NN3A299A, 138712, 00138712, VPJ2403 (Item #: 100629, Ref: C0NN3A299A) $7.50

Steering Arm Dust Seal - This Steering Arm Dust Seal fits between the Steering Arm and the Spindle. It measures 1 7/8 Inches (48mm) Outside Diameter, 1 1/2 Inches (38mm) Inside Diameter, 1/4 Inches (6mm) Thick. Replaces 81802845, C0NN3A208A (Item #: 104573, Ref: C0NN3A208A) $4.00

Steering Arm - Left Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, (Item #: 100665) $65.00

Steering Arm - Left Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, LH Steering Arm, (Item #: 104739) $119.00

Steering Arm, Left Hand - This Left Hand Steering Arm is used on Ford / New Holland Tractors: 5000, 5100, 5340, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600. Replaces C5NN3131B, C5NN3131J, 81813163 (Item #: 104737, Ref: C5NN3131B) $166.00

Steering Arm - Left Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3131A, All Models With Power Steering, Left Side, Tie Rod attaches from bottom of steering arm, For a new version of this item use Item #: 100665, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410665) $33.01

Steering Arm - Left Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, Replaces Ford OEM number E3NN3131AA, Left Hand Steering Arm, For a new version of this item use Item #: 104739, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446689) $70.01

Steering Arm - Right Hand - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Right Side, Tie Rod attaches from bottom of steering arm, (Item #: 100666) $71.00

Steering Arm - Right Hand - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, RH Steering Arm, Tie rod attaches to top of steering arm, (Item #: 104738) $141.00

Steering Arm - Right Hand, Used - For Ford tractor models 5000, 5100, 5340, 5600, 5610, 5900, 6600, 6610, 7000, 7100, 7600, 7610, Replaces Ford OEM number C5NN3130A, With Power Steering, Tie Rod attaches from bottom of steering arm, Right Hand, For a new version of this item use Item #: 100666, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410666) $44.01

Steering Arm - Right Hand, Used - For Ford tractor models 5100, 5110, 5600, 5610, 5900, 6410, 6600, 6610, 6810, 7100, 7600, 7610, Replaces Ford OEM number E3NN3130AA, Tie rod attaches to top of steering arm, Right Hand Steering Arm, For a new version of this item use Item #: 104738, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446688) $78.01

Steering Gear Assembly, Manual - Manual Steering Gear, does not include drop arm. (Fits some models with power assist steering). Fits: 5100, 5110, 5340, 5600, 5610, 5900, 6410, 6600, 6600C, 6600O, 6700, 7100, 7600, 7600C, 7600O. Replaces D2NN3503A, D7NN3503A, D5NN3503D, 83912775, C5NN3503F. Note: When making a right hand turn, the steering are moves counter clockwise. (Item #: 161569, Ref: D7NN3503A) $640.00

Steering Shaft and Nut Assembly - Left Hand Spiral. For models: 5000, 5100, 7000 and 7100, 1965 to 8/1970 with power steering. Power steering cylinder in front support. This shaft is approximately 28 13/16 inches long. It replaces C5NN3A710A. (Item #: 114038, Ref: C5NN3A710A) $137.00

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.30

Tie Rod End - For Ford tractor models 4400, 4410, 5000, 5100, 5200, 5600, 5610, 6000, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Replaces Ford OEM number E3NN3307AA, C5NN3307F, 3.812" Long, 1" Diameter, 16 Right Hand Thread, (Item #: 100687) $20.50

Tie Rod, Outer, LH - Used on the outer left side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replace 81802856, C5NN3281C (Item #: 104620, Ref: C5NN3281C) $38.60

Tie Rod, Outer, rh - Used on the outer right side of manual steering models 5000, 5100, 5340, 7000, 7100, 7200 all from 1965-1967 with manual steering. This part measures 17.500 inches from the center of the ball joint to the end of the shaft. The shaft diameter is 0.940 inches. Replaces 81802851, C5NN3280F (Item #: 100678, Ref: C5NN3280F) $35.00

Wheels

No
Picture
15" x 30" 8 Loop Rear Rim, Silver Mist - For Ford tractor models 2310, 2600, 2610, 2910, 3000, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5190, 5200, 5600, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 234, 334, 335, 420, 515, 530, 532, 535, Replaces Ford OEM number C5NN1100AE, D2NN1150L, D9NN1036GA, D9NN1050GA, Width: 15", Diameter: 30", Type: 8 Loop, Bolt Circle of Loops: 24.25", From Centerline to inside of Loop: 2.062", From Centerline to outside of Loop: 3.625", Valve stem side: 1, Rim Thickness: .187", Rim Color: Silver Mist, (Item #: 110436) $410.00

$Ford 7100 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $72.00

Front Rim - This is a 5.5 inch x 18 inch Front Wheel Rim. Used with 7.50 x 18 Tires. It has a pilot hole of 4.656 inches. It uses 6 bolts in a 6 inch bolt pattern. Verify size of old rim before ordering. Replace 3121425R91, 804711R91, K301046, K949731, 3121425R91, 83960329, C7NN1007B, 83918556, 81825697, 81820016, D1NN1007C, D8NN1007CA, 82005057, 82033932, E6NN1007CA, D4NN1007N, JD3211, AL82491, 3827583M91, 186319M91, 1861319M91 (Item #: 167680, Ref: FW55186) $138.00

Front Wheel Bearing Seal - This seal measures 2.047 inches inside diameter, 2.953 inches outside diameter, 0.354 inches wide. It replaces part numbers C5NN1190E, C5NN1190B, 83924930, 82964655, 83902586, 83958356, 83956524, 81823079, D8NN1190CA, E0NN1190AA, D8NN1190AA (Item #: 112061, Ref: E0NN1190AA) $4.70

Front Wheel Hub - 6 Bolt - For Ford tractor models 5000, 5100, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, Replaces Ford OEM number C9NN1104D, 6 bolt, (Item #: 100663) $49.80

Front Wheel Hub Cap - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW35, 3400 ('65-74), 3500, 3910, 4030, 4400, 4410, 4610, 5000 ('63-75 w/10"x16" tires), 5100, 5110, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000 ('63-75 w/10"x16" tires), 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8240, 8340, 8700, 9000, 9700, Compatible with Ford Construction and industrial models 250C, 260C (340), 340, 345, 420, 445, 450, 540, 545, 2030, 3550, Replaces Ford OEM number 249127, (Item #: 104571) $5.60

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $78.00

Rear Axle Stud - This Rear Axle Stud connects the rear axle to the wheel center disc. It is used with C5NN1120E nut. 3/4 inch x 2 5/16 inch 16 (UNF) Thread. Replaces C5NN1N118J, C5NN1N118H, 81815740, 81815607, 81815739 (Item #: 115382, Ref: C5NN1N118H) $3.40

Rear Spinout Rim Stop - For 90 degree drilled rim rail. For spin out rims with 4 sided rectangle shaped stops. Limited applications, verify style before ordering. Will NOT fit the spinout rims that we offer. Replaces 232274, 1755060M1, 230832, 70230832, 7023227, E5NN1057BA, K917337, T14751 (Item #: 152053, Ref: 1755060M1) $16.20

Rim Clamp, Used - For Ford tractor models 3230, 3430, 3930, 4000, 4030, 4100, 4110, 4130, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8240, 8340, 8400, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with New Holland tractor models TS90, TS100, TS110, TS115, Replaces OEM nos 81821553, Replaces Casting nos C9NN1043F, For Power Adjust Wheels, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497001) $37.01

Rim Stop Screw - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5640, 5700, 5900, 6000, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7840, 8000, 8200, 8210, 8340, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9030, 9600, 9700, Compatible with Ford Construction and industrial models 256V, 276, Compatible with New Holland tractor models TS100, TS110, Replaces New Holland OEM number 81811263, C0NN1058A, Screw for stop body, Use with power adjust rims PAR10X28, C5NN1050J, and C5NN1050H, Rear rim stop screw, (Item #: 151948) $6.20

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.516 inch outside diameter, 0.78 inch inside diameter, 0.089 inch thick. It replaces original part numbers C5NN1N195A, 81811561, 9N1195. (Item #: 164443, Ref: C5NN1N195A) $1.40

Spindle Tab Washer - This Tab Washer is used on some Ford Tractors 1939-and later. Measures 1.50 inches (38.20mm) outside diameter, .775 inch (19.70mm) inside diameter, 0.0625 (1.23mm) inch thick. It replaces original part numbers 957E1195, 81802388, 83910701, 898349M2, 180010M1, 180010M2 (Item #: 173191, Ref: 957E1195) $1.50

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 81811263, C0NN1058A. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Bearing Kit - Used on many Ford / New Holland models using 10.00 x 16 inch front wheels, this kit contains 25590 bearing cone, 25521 bearing cup, 02474 bearing cone, 02420 bearing cup, 412920 seal (not shown). Replaces EAPN1200B, EHPN1190A, EHPN1200B, 8A411. Used on some of the following models: 3400, 3500, 3550, 4120, 4140, 4400, 4410, 4500, 5100, 5110, 5190, 5200, 5610, 6000, 7100, 7200, 8000, 8200, 8240, 8340, 8400, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35 (Item #: 100657, Ref: WBKFD7) $44.30

Wheel Hub Kit - For Ford tractor models 5000, 5100, 5110, 5600, 5610, 5640, 5700, 5900, 6410, 6640, 6700, 6710, 6810, 7000, 7100, 7600, 7610, 7700, Replaces Ford OEM number C9NN1104D, C5NN1130A, E2156T9, EHPN1200D, C5NN1107F, (Item #: 113372) $84.00

Wheel Nut - This Cone Wheel Nut is 3/4 - 16 Thread (UNF). It is used for the center disc to rear axle. It is used with C5NN1N118H Studs. Replaces 81816136, 81833776, C5NN1120E, D3NN1120B (Item #: 156987, Ref: C5NN1120E) $3.50

No
Picture
Wheel Nut and and Stud Pack (6) - For Ford tractor models Dexta, NAA, Super Dexta, 8N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2300, 2600, 2610, 2810, 2910, 3000, 3055, 3230, 3300, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 4630, 5110, 5200, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, Replaces OEM number 81816580, 81815739, Sold in Packs of 6, (Item #: 177012) $20.50

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.20

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.40

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.20

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.40

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 7100 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Ford 7100 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 7100 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Ford 7100 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Ford 7100 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Ford 7100 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.70

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $10.70

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $40.60

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $19.00

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.27

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.20

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $64.00

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $24.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $32.10

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $75.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $30.30

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $49.00

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $270.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $53.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.50

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $24.00

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.70

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $86.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.60

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $8.50

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $21.40

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $9.10

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.00

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $90.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $35.00

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $46.60

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $76.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $76.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $37.90

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $31.30

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Item #: 183819, Ref: WHS064) $82.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.20

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $112.00