Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 2600 Tractor Parts

[ Show Pictures ]

[Categories]   [All Ford Models]   [Print]  


Brakes
Brake Backing Plate - Fits 2000, 3000, 4110 (Dec 1966 and newer), 2600, 3600, 231, 233, 333, 335, 531, 2310, 2610, 3610, 230A, 234, 334, 530A. Replaces 81815610, C5NN2212D (Part No: C5NN2212D)
$177.00

Brake Cable - This Brake Cable is 1855mm (72.3 Inches) overall length. Outer Cable length is 1697mm (66.81 Inches). This cable is used in single cable systems on Ford / New Holland: 230A, 2310, 233, 234, 2600, 2610, 2810, 2910, 333, 334, 335, 3600, 3610, 3910, 4100, 4110, 4600, 4610, 530A, 531, 5600, 5700, 6600, 6700, 6710, 7600, 7700, 7710, 7810, 7910, 8210. Replaces D6NN2853B, D5NN2853A, 83918382 (Part No: D6NN2853B)
$45.47

Brake Cross Shaft Bushing - Outside diameter 1 1/4 inches, inside diameter 1 1/8 inches, length 1 inch. Fits 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500. (Part No: C5NN2N477A)
$4.70

Brake Drum - Fits 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 334, 335, 530, 531. Additional $10 Shipping due to weight. This additional charge will be added to your order. (Part No: C5NN1126E)
$51.00

Brake Pedal Return Spring - Brake Pedal Return Spring measures 3 1/4 inches and wire thickness of .100. Fits tractors: 2000, 2300, 2310, 2600, 2610, 3000, 3610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 3400, 3500, 4110LGC, 530A, 531 (Part No: E1NN2472BA)
$3.36

Brake Rod - Cross shaft to actuator shaft, 7-3/4" from center of holes to end of shaft, 3/8" UNF thread. For tractor models 2000, 3000, 2600, 3600, 2310, 2610, 3610, 230A, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 4110LCG, 530A, 531. (Part No: C7NN2466A)
$11.26

Brake Shaft Felt Seal - This Brake Shaft Felt Seal measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)
$1.46

Brake Shaft Seal - This Brake Shaft Seal measures 1.565 inch outside diameter, 1-1/16 inch inside diameter. It replaces original part numbers C5NN2473F, C5NN2473H, C5NN2N258C, D2NN2N258A, D8NN2N289AA, D9NN2N289AA, 65968, 83924047. (Part No: D9NN2N289AA)
$2.76

Brake Shoe Retaining Pin Kit - This kit will do 1 set of brakes. 2 kits required per tractor. Contents for 1 kit is as pictured. For models 3500, Dexta, Super Dexta, 2000, 2100, 2110, 2120, 2150, 230A, 2300, 231, 2310, 233, 234, 2600, 2610, 3000. Replaces VPJ7300, 81717336, 81802465, 81802473, 82019841, 957E2069A, 957E2068, 957E2066 (Part No: 1810029M91)
$16.50

Brake Shoe Spring, Primary to Secondary - This Spring is 5-3/16 inches over all, has a 2-11/16 inch coil length and a 5/8 inch coil diameter. It is used on tractor models Dexta, Super Dexta, 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 4110LCG, 530A, 531. Replaces original part numbers 957E2035, 81717325, C5NN2B289A (Part No: 957E2035)
$2.30

Brake Shoe with Bonded Lining - This shoe is 1 1/2 inch wide, 13.25 inch diameter. Brake Shoe For 2000, 3000, 4110 (12/1966 & up), 2600, 3600. Replaces C5NN2218F. Also replaces F2NN2218A. Price is each. 4 used per tractor. (Part No: D9NN2218AA)
$22.00

Hand Brake Disc - Diameter 4 inches, 1-1/4 inch hub, 23 splines. Also replaces: D5NN2N625A and C5NN2N625B. Fits Tractors: (2000, 3000, 4000 all from 1965 and newer - UK), (2000, 3000, 4000 all from Jan/1972 and newer - USA), 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4610, 5600, 5610, 5900, 6600, 6610, 6700, 7600, 7610, 7700, 7710. Fits INDUSTRIALS: 230, 231, 233, 234, 333, 335, 340, 3500, 3550, 420, 4400, 4500, 445, 450, 515, 531, 532, 540, 540, 545, 5500, 5550. Replaces C5NN2N625B, D5NN2N625A, E9NN2N625AB, 83906199, 81867258 (Part No: E9NN2N625AB)
$27.76

Hand Brake Repair Kit - This Hand Brake Repair Kit contains Rod. Knob, Pawl and Spring. Replaces 81816243, C7NN2N606B, C7NN2N616D, C5NN2N615B, 81708853, E0A2744, 81819533, 81819534, 81876606 (Part No: S.66303)
$14.85

Clutch
Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7/8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Part No: AG15)
$20.76

Clutch Disc, 11 inch - Torsion Dampened, Organic, 1 inch Spline Diameter, 10 Spline. For tractor models 2000, 2100, 2110, 2300, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 333, 335, 3400, 3500, 3600, 3610, 3910, 4000, 4200, 4400, 4410, 4600. (Part No: 328015716)
$43.87

Clutch Disc, 11 Inch - 15-Spline, 1 inch Hub, Woven Facing. For Tractors including: (2000 and 3000 1965 to 9-1969) Replaces C7NN7550C. Models with 7 and 8 speed transmissions and PTO. Also fits the following models (less PTO): (4100, 4110, 4200 1965 to 9-1969), (4100 10-1971 and up). 83971425, C7NN7550V, E8NN7550BA, C7NN7550B (Part No: C7NN7550V)
$83.00

Clutch Disc, 11 Inch - 10-Spline, 1 inch Hub, Woven Facing. For 2000, 2600, 2610, 3000, 3600, 3610, 3900, 4000, 4100, 4110, 4600. Replaces 82006626, 87295808, D1NN7550A, E5NN7550BA, E5NN7550BB. (Part No: D1NN7550A)
$39.30

Clutch Disc, 11 Inch - This is a Rigid Disc, no Springs. It is 11 inch, 15 Spline, 1 inch Hub, Rigid Disc, Fiber type material. Replaces E8NN7550BA, C7NN7550V, 328024710, 3280247101. (Part No: 328024710)
$37.49

Clutch Kit - This single stage clutch kit contains a 11 inch, 10 spline rigid drive clutch disc (87295808), a 11 inch single pressure plate with six bolt mount, (used 1969 and later)(C9NN7563D), a pilot bearing which measures 1.575 inches OD, .669 inch ID, .472 inches wide (C5NN7600A), new release bearing which measures 4.0700 inches outside diameter, 2.4997 inches inside diameter, 0.8700 inches wide (83914247), and clutch alignment tool. **NOTE** Some tractors use a release bearing which measures 2.0625 inches inside diameter, 3.515 inches outside diameter and .840 inches in width. If you need this smaller bearing, also order part number N1087. For tractor models 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D. (Part No: D0NN7563A-KIT)
$180.91

Clutch Kit - This new double clutch kit contains a new 11 inch, 15 Spline Rigid Drive Disc E8NN7550BA. A new 11 inch, 29 Spline Double Pressure Plate D8NN7502AA. Pilot Bearing C5NN7600A and Release Bearing 83914247. Includes Pilot Tool. For tractor models (2000, 2100, 2110, 2310 3 cylinder dual clutch), 2120, 2150, 231, 234, 530A, 531, (230A, 233, 333 dual clutch), (2310, 2600, 2600N, 2610 1981-Dec 1984 dual clutch), (3000, 3100, 3400, 4000, 4110 1965-Sept 1975 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330 Jan 1965-Dec 1974), 3600 Oct 1975 and up dual clutch, 3610 Oct 1981-Dec 1984 dual clutch. (Part No: D8NN7502AA)
$349.14

Clutch Kit, 11 Inch IPTO - Kit contains 11" 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11" 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1" by 10 spline and 1-7/8" by 29 spline pilot tool. (Part No: 1112-6113)
$335.00

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Part No: FC563ZNKIT)
$360.00

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4" hub 82011593, 13" single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB Additional $10.00 shipping due to weight. This additional charge will be added to your order. (Part No: 11126087)
$247.22

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Part No: C7NN7N598A)
$4.46

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Part No: D8NN7563DB)
$144.00

Clutch Shaft Bushing - This clutch shaft bushing measures1.50 inches long, 1.2 inch outside diameter, 1.13 inch inside diameter. For tractor models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Part No: C5NN7A615A)
$3.76

Dual Clutch Kit with 10 spline RIGID disc - This new dual stage clutch kit contains a new 11 inch, 3 lever dual pressure plate assembly (D8NN7502AA), a new 11 inch 10 spline RIGID type clutch disc (E8NN7550HA), new release bearing, new pilot bearing and clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: Includes PTO Disc. (Part No: 1112-6089)
$370.04

Dual Clutch Kit with 10 spline SPRING disc - Kit contains 11 inch, 10 Spline 1 inch hub, Spring Drive Disc E8NN7550HA. 8 1/2 inch 29 Spline, 1 7/8 inch hub PTO Disc in Double Pressure Plate D8NN7502AA. Pilot and Release Bearings. Includes Pilot Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Additional $20.00 shipping due to weight. This additional charge will be added to your order. (Part No: 1112-6075)
$430.00

Dual Clutch Kit with 15 spline Spring disc - This Clutch Kit includes NEW parts: D8NN7502AA Pressure Plate is 11 inches and 29 Spline, 3 lever. C7NN7550B Clutch Disc with Springs is 11 inches and 15 Spline on a 1 inch hub. Release and Pilot Bearings and Clutch Alignment Tool. For 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. (Part No: 1112-6061)
$340.98

Dual Clutch Kit with Triangular disc - This new dual stage clutch kit includes a new 11 inch, 3 lever, 29 spline double pressure plate assembly (D8NN7502AA), a new 11 inch, 10 spline, triangular clutch disc (E8NN7550BA), new release bearing, new pilot bearing, and a clutch alignment tool. For 3-cylinder tractors: 2000, 2310, 231, 233, 234, 2600, 2610, 3000, 333, 334, 340A, 3600, 3610, 4000, 4100, 530A, 531. VERIFY DISC TYPE BEFORE ORDERING. Note: PTO disc included. (Part No: 1112-6076)
$455.00

Pilot Bearing - For tractor models 1800, 1801, 1821, 1841, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3610, 3630, 3910, 3930, 4031, 4100. 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. Replaces 81805417, B7600A3, C5NN7600A (Part No: C5NN7600A)
$3.44

Pressure Plate Assembly - Pressure Plate Assembly, 11 inch Single Clutch. For tractor models 2000, 233, 2600, 3000, 321, 3600, 5000. (Part No: D0NN7563A)
$120.26

Pressure Plate Assembly - This is an 11 inch Double Clutch with a 29 Spline 8 1/2 inch PTO Disc with 1 7/8 inch hub, and a 1.750 inch Flywheel Step. It replaces part numbers 86634451, D8NN7502AA, D8NN7502BA, D8NNY502AA and 83939291. (Part No: D8NN7502BA)
$315.00

PTO Clutch Disc - PTO Disc 8-1/2 inch, 29-Spline, 1-7/8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12/1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12/1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1/1965-12/1974), (335 utility 10/1975-9/1978), 3500, 3550, (3600 10/1975 and up), 3600N Narrow, (3610 10/1981-12/1984), 3910, 4600, 4600O, 4600SU, 530A. (Part No: C5NN77641B)
$65.00

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Part No: N1585)
$18.26

Release Bearing - This Sealed Release Bearing measures Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. For tractor models 1800, 2130, 2131, (2600, 2600N, 2610 1981 to 12/1984), (3000, 3100 1965 to 9/1975), (3120, 3150, 3190, 3300, 3310 1/1965 to 12/1974), (Dexta, Super Dexta 1/1958 to 12/1964), Major, Power Major. Replaces 787580A8. (Part No: N1087)
$20.33

Cooling System
Blower Motor - This Blower Motor is 4 wire, 12 volt 3/8 inch x 4 1/4 inch shaft, 3 speed, body length 4 1/8 inches, body diameter 3 1/2 inches. It is used on Ford New Holland 8400, 8530, 8600, 8630, 8700, 9200, 9600, 9700, 9710, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 230A, 2310, 233, 234, 2600, 2610, 2910, 335, 3600, 3610, 3910, 4610, 530A, 5600, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8730, 8830, 9000. Replaces D2NN19N581B, D5NN18527AA, D5NN18527AA, V103596, V18380, V35513. (Part No: 72162089)
$76.00

Fan Belt - Fits 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 230A, 231, 334, 335, 420, 515, 530A, 531, 532, 535, 545D 650, 750, 755, 755A, 755B. Some of these tractors used more than one type of belt. Verify part number before ordering. 1/2 Inch (13 mm) x 55 7/16 Inches (1408 mm) raw edge v-belt. (Part No: D4NN10C318A)
$10.10

Fan Blade - 4 Blade - Fan Assembly, 4 Blade, 16 inch diameter, 0.625 inch pilot hole, and mounting holes on 2.5 inch center. For tractor models 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3900, 3910, 4000, 4100, 4110, 420, 4400, 4500, 4600, 4610, 5100, 515, 531, 535, 5600, 6600. Replaces 87017802, 81805721, C5NN8600B, C5NN8600A (Part No: C5NN8600A)
$31.00

Fan Blade - 8 Blade - For 3 and 4 Cylinder 1965 and up: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7000, 7600. 8 Blade, blue PLASTIC 5/8 inch pilot hole, 4 bolt with 2 1/2 inch center to center on opposite holes, 16 inch outside diameter. (Part No: S.60579)
$15.90

Radiator - Core size (the finned part) is 17 3/8 inches wide, 16 1/2 inches high with 3 rows of tubes and 9 fins per inch. Also replaces EONN8005MA15M, EONN8005KA15M, EONN8005LA15M, EONN8005MB15M, EONN8005MD15M, C7NN8005N. For 3-cylinder engines (1965 and newer) on: 2000, 2100, 2120, 2300, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4140, 4400, 4600, 4610. (Part No: C7NN8005H)
$172.00

Radiator Cap - 13 PSI Radiator CAP (FOR 2000, 3000, 4000, 5000, 7000 1965 TO 1975), (2600, 3600, 4100 4600, 5600, 5700, 6600, 6700, 7600, 7700 1975 TO 1981), (2610, 3610, 4110, 4610, 5610 6610, 7610, 7710 1981 and up). REPLACES D2AE8100A1A. (Part No: E2NN8100BA)
$5.10

Radiator Hose, Bottom - Inside diameter 1.725 inches. Fits GAS and DIESEL MODELS: 2000 (3 Cylinder), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420, 4600. GAS ONLY MODELS: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Part No: C5NN8286B)
$6.60

Radiator Hose, Upper - This Upper Hose is for Gas engines. Hose inside diameter 1.5 inch. Fits radiator upper. For 2000, 2310, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 532, 535, 5600, 5700, 6700, 7600, 7700. (Part No: C5NN8260D)
$10.86

Radiator Hose, Upper - Hose inside diameter 1.5 inch. FITS: 2000 (3 Cylinder DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D5NN8260D)
$5.46

Radiator Mounting Pads, Pack of 2 - This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 180705M1)
$1.90

Thermostat - Thermostat, 168 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Dexta, Super Dexta. (Part No: D8NN8575AAWG)
$9.77

Thermostat - 172 degree with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Part No: D8NN8575CAWG)
$9.00

Water Outlet Housing - Housing, Water Outlet Connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700. (Part No: C7NN8594B)
$10.86

Water Pump - USE EAPN8A513E (Part No: FAPN8A513DD)
$67.00

Water Pump - For tractor models 340A, 340B, 345C, (4500 diesel), (540, 550, 555, 555A, 555B, 3930, 4000, 4130, 4600, 4610H all with BSD333 engine), (2000, 2600, with BSD326 engine), (3000, 3600, 3900 with BSD329 engine), 3230, 3430, 3910H with BSD332). Water Pump with Single Pulley, Back Housing and Gasket. Replaces 87800115, C5NE8501A, C5NN8501A, D3NN8501A, D5NN8501E, D8NN8501CA, D8NN8501UA, D8NN8501UB. (Part No: D8NN8501UC)
$75.00

Water Pump - This water pump comes with a dual belt pulley. For 340A, 340B, 420, 445, 445A, 450, 515, 535, 540, 540A, 545, 545A, 555E, 6500, 750, 2600, 3600, 4600, 5600, 6600, 6700, 7600, 7700, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 6810, 7410, 7610, 7710 (1/1981-10/1988). Replaces EGPN8A513CA, FAPN8A513DD. Water Pump with Dual Pulley & Gasket. The proper fan for this pump is part number D9NN8600AA. Bolt pattern on the hub for the pulley is 2.5 inches center-to-center across. (Part No: EAPN8A513E)
$80.93

Water Pump - This Water Pump comes with Single Groove Pulley and Gasket. Does not come with back housing. Comes with back housing gasket. Replaces FAPN8A513GG. For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5710, 5610, 6610, 6710, 7610, 7710. Also replaces FAPN8A513GG. Uses Fan blade with 2-1/2 inch bolt spacing center-to-center. (Part No: EAPN8A513F)
$39.26

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Part No: E5NN8507AB)
$1.16

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford/New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Part No: E6NN8513AA)
$1.70

Decals and Emblems
Decal Set - Hood only For model 2600. (Part No: R0517)
$29.26

Shift Pattern Decal - For tractor models 2000, 3000, 2600, 3600 all with 6 speed transmissions. (Part No: S.67193)
$9.51

Drive Train
Ball Bearing Assembly - The is an open, deep groove bearing. It has applications in transmissions as well and is CAR MFWD front ends. It measures: 60mm (2.362 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces manufacturer part numbers: 6212, 32306, ST269A, 3114946R91, K261879, 83930318, 20141040, CAR25813, 28996590, C5NN7127B, 81804781, 80996590, 20140, 253072272, 8101-06212, 1440545X1, 24101-62124, 971043 (Part No: C5NN7127B)
$27.26

Bearing, Main Input Shaft - Measures 40mm inside diameter, 90mm outside diameter, 23mm wide. Replaces 20943310, 63082RS, 6308, 86511837, 81805130, 81808853, C5NN7A452A, N115069A, 391068X1 (Part No: C5NN7A452A)
$14.70

Center Housing Gasket - Used on the following, all built 1965 or later: 2000, 2110LCG, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 333, 335, 340, 3400, 340A, 340B, 3500, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 445, 450, 4600, 4610, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 655, 655A. Replaces D4NN4N507A, C5NN4N507A, 86569738 (Part No: D4NN4N507A)
$9.50

Countershaft - Hollow for tractor models with 6 speed and Trans PTO: 2000, 3000, 2600, 3600, 231, 233, 335, 2110, 3400, 3500, 4500. (Part No: C5NN7111B)
$188.87

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Part No: C5NN7113B)
$265.00

Coupling, Counter Shaft Sliding Gear - 21 teeth, 16 spline. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5640, 5700, 5900, 655, 655A, 6600, 6610, 6610S, 6640, 6700, 6710, 7010, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810S, 7840, 8010, 8240, TS100, TS90 all with 8 speed transmission. Replaces C5NN7106B, C7NN7106E, C5NN7102F, D2NN7106B, C5NN7106D, 81819184, 81826589, 81823632, 81813478, E0NN7106BA, 83934545 (Part No: E0NN7106BA)
$70.00

Deep Groove Ball Bearing Single Row - This bearing measures 50mm inside diameter, 90mm outside diameter, 20mm wide. It is used as PTO Input Shaft Bearing with live PTO. It also has other applications. Confirm by OEM part numbers. Replaces: 6210, 26794660, C5NN7N166B, C0NN7C246B, N115069B, 81854759, 83908455, 84330059, 255090201, 8101-06210, 391162X1, 24101-62104, 971041, 979537, 971129 (Part No: C5NN7N166B)
$32.85

Differential Bearing - For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Dexta, Super Dexta, TS100, TS110, TS115, TS80, TS90. Replaces 957E4222, 957E4221, 81803413, 81803420 (Part No: 185251M1)
$139.00

Differential Lock Nut - For tractor models 2000, 231, 233, 2600, 3000, 333, 335, 3600, 4110, 531. (Part No: C5NN4N001A)
$23.00

Gear, 1st - 49/28 teeth, 1.775 inch inside diameter, 7.125 inch outside diameter. For tractor models 2000, 2110, 2120, 2300, 2310, 2600, 3000, 3055, 3330, 3400, 3500, 3600, 4000, 4110, 4140, 4330, 4340, 4400, 4410, 4500. (Part No: C5NN7100A)
$206.00

Gear, 1st - 46/28 tooth. For tractor models 2100, 2600, 2610, 2810, 2910, 3055, 3100, 3400, 3550, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4410, 4500, 4600, 4610, 5100, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N100A, E6NN7N100AA, C5NN7N100C, 81813521, 83960019 (Part No: 83960019)
$150.00

Gear, 2nd & 5th - 41/28 Tooth, 1.775 inch inside diameter, 6.125 inch outside diameter. For tractor models 2000, 2110LCG, 231, 233, 2600, 3000, 335, 3400, 3500, 3600, 4110LCG, 4400, 4500, 531, Dexta, Super Dexta. All with 6 speed transmissions. Replaces 957E7101B (Part No: 957E7101B)
$118.00

Gear, 3rd, 8 Speed Transmission - 28/35 teeth. For tractor models 2000, 3000, 3600, 3610 all with 8 speed transmission. (Part No: C5NN7B340A)
$177.00

Gear, Differential Side - Part 1 in the picture. For tractor models (2000, 3000, 4000 all 1965-1975 LH with diff. lock, LH or RH without locks), (5000, 7000 all 1965-1975 RH with Diff. lock, LH/RH without diff locks), (2600, 3600, 4100, 4600 all 1975-1981 LH with diff. lock, LH/RH without locks), (5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 RH with Diff. lock, LH/RH without locks), (2610, 3610, 4110 all 1981 and up LH with diff lock, LH/RH without locks), (5610, 6610, 6710, 7610, 7710 all 1981 and up RH with diff lock, LH/RH without locks). (Part No: C5NN4236A)
$105.00

Gear, Differential Side - Part 2 in picture. For tractor models (2000, 3000, 4000 all 1965-1975 RH with diff. lock), (2600, 3600, 4100, 4600 all 1975-1981 RH with diff. lock), (2610, 3610, 4110, 4610 all 1981 and up RH with diff. lock). (Part No: C5NN4239A)
$120.00

Gear, Secondary Output Shaft - 45 big teeth, 28 small teeth. For tractor models 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 2600, 3000, 3055, 3100, 3330, 335, 3400, 3500, 3600, 4000, 4100, 4110LCG, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 531, Dexta, Super Dexta. Replaces E49GA9 (Part No: E49GA9)
$105.29

Gear Shift Boot - This Gear Shift Boot can be used on multiple Ford/New Holland Tractors built 1965 and later. The top holes is 5/8 inch and the bottom hole is 2 1/2 inches. It replaces original part numbers C5NN27534, C5NN275394, C5NN7277D, D4NN7N309A, 82007346. (Part No: C5NN27534)
$3.26

Gear Shift Coupler, Rear - 28 teeth, 20 spline. For tractor models 2600, 2610, 2810, 2910, 3100, 340, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4600, 4610, 5100, 5110, 5200, 5610, 5640, 5900, 6410, 6600, 6610, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710, 7740. Replaces D6NN7N072B, E6NN7N072BA. (Part No: 82983825)
$67.00

Gear Shift Knob - This Gear Shift Knob fits 5/16 inch x 24 thread and approx. 1.299 inch diameter. It replaces original part numbers E440GB9, 81800669 (Part No: E440GB9)
$3.50

Gear Shift, Rail - High/Low. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 340B, 3430, 345D, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5030. (Part No: C5NN7240AD)
$48.76

Input Drive Shaft - This Input Drive Shaft is 17.66 inches long, has 10 splines and 19 teeth. Replaces original part numbers C5NN7017AC, C7NN7017AB, 81813988, 81820864 (Part No: C7NN7017AB)
$108.00

Input Shaft - This Input Shaft is used on Step Up Step Down Transmissions. It is 9 inches in length. Used in the following tractors, 1965 and later: 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500. Replaces C5NN7015T. (Part No: C5NN7015T)
$220.31

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Part No: E6NN7106AA)
$61.00

Main Shaft Pilot Needle Bearing - This Main Shaft Pilot Needle Bearing is used on 2000, 2110LCG, 230A, 231, 2310, 233, 234, 2600, 2610, 3000, 333, 334, 335, 3400, 3600, 3610, 530A, 531, Super Dexta. Measures 0.9973 inches inside diameter x 1.3735 inches outside diameter x 0.875 inches wide. Replaces 960E7120, C5NN7120B, 81821350, C9NN7120A (Part No: C5NN7120B)
$22.06

Mainshaft, Transmission, Rear - 30 teeth, 17 and 28 splines. For tractor models (2000, 3000, 3600, 3610 all with 8 speed transmission.) Replaces C5NN7C095D, 81804717 (Part No: C5NN7C095D)
$158.00

Oil Filler Plug - For transmission and rear end. For tractor models 2000 3 cylinder, 231, 233, 234, 2600V, 333, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 2100, 2110, 2120, 2150, 2300, 2600, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000 3 cylinder, 4100, 4110, 4140, 4190, 4200, 4300, 4340, 4400, 4410, 4500, 4600, Dexta, Power Major, Super Dexta, Super Major. Please verify the thread size before ordering. This plug measures 1-5/8 inch x 12 thread. Does not come with gasket. Use NAA9160A for gasket. (Part No: 957E7010)
$13.76

Oil Seal, Secondary Output Shaft - For tractor models 2000, 2600, 3000, 3600, 4000 all with 6 Speed Transmission, Dexta, Super Dexta. Measures 83mm outside diameter x 46mm inside diameter x 14.8mm width. Replaces E42GA9, 81717023 (Part No: E42GA9)
$6.84

Output Shaft Bearing - Measures 41.3mm inside diameter, 73.4mm outside diameter and 19.8mm wide. Replaces: LM501349/501310, 663558R1, 81277C1, 81278C1, GHB142, 663557R91, 86512015, 5132342, 4999261, WAA4221A, 860270, 860297, WAA4222A, WAA4220A, 05132342, 67370, 67371, 644321, 81803417, 860299, 860301, 860302, 860304, 81803412, 860295, 86512015, 5132342, 83992412, 81854761, 81854361, JD8237, JD8902, 663556R91, 663558R1, 86512015, 663557R91, 109706396, GHB142, MBU1044, 113571M1 (Part No: 86512015)
$10.05

Output Shaft Gear - Gear has 28 and 49 Teeth. It is used an many Ford / New Holland Models with 8 speed and 6x4 Manual Reversing Transmissions. Replaces OEM part numbers C5NN7145A, 83960022, E6NN7145BA, 81804812, E6NN7145AA (Part No: E6NN7145AA)
$330.00

PTO Input Bearing Retainer Seal - The Seal Measures Oil seal, 1.878 inches inside diameter, 3.130 inches outside diameter, 0.5000 inches wide. It replaces OEM numbers E59GE9, 83924923, D9NNC729BA, 87712923 (Part No: D9NNC729BA)
$5.20

PTO Input Housing Gasket - Used on many Ford / New Holland tractors, 1965 and later. It replaces OEM part numbers 81804647, 81804648, 83959976, C5NN7N051A, C5NN7N051B, E7NN7N051AA (Part No: C5NN7N051B)
$0.55

Rear Axle - This is a Collar Type Rear Axle used on the following 1965 or later: 2000, 2100, 2110, 2110LCG, 2120, 2150, 2300, 231, 2310, 233, 234, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 3400, 3500, 3610, 4000, 4110, 4110LCG, 531. Additional $10 shipping due to size and weight. This additional charge will be added to your order. Replaces D7NN4244A, C5NN4244A, 83912192 (Part No: C5NN4244A)
$226.38

Rear Axle Inner Seal - This inner rear axle seal is for tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. (Part No: C9NN4N109A)
$4.00

Rear Axle Outer Seal - For tractor models 2000, 2600, 2610, 3000, 3400, 3600, 3610. Replaces C5NN4115B, 86531999, 81803352 (Part No: C5NN4115B)
$4.30

Secondary Output Shaft Bearing - This Secondary Output Shaft Bearing measures 1.5000 inches inside diameter, 3.2500 inches outside diameter, 0.7500 inches width. Replaces original part numbers E53GA9, 81800632, SKF RLS 12 (Part No: E53GA9)
$26.06

Shift Cover Gasket - This Transmission Shift Cover Gasket is used on multiple Ford Tractors, 1965 an later with 6, 7 or 8 speed transmissions. It replaces original part numbers 82004680, 83959206, C5NN7N225C, D5NN7223B, D8NN7223AA, E6NN7223AA, E8NN7223AA. (Part No: C5NN7N225A)
$4.06

Shifter Assembly, Cast Iron - For tractor models with 6, 7 and 8 speed transmissions from 10/1966 to 1975. Complete Shift Cover Assembly includes cover, shifter boots. DOES NOT INCLUDE GASKET, KNOBS BOOTS OR PLUGS. We do not have plugs available. Order C5NN7N225A gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Part No: C5NN7211E)
$113.50

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10/1966. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Part No: S.66211-LG)
$62.00

Shift Knob - For tractor models Dexta, Super Dexta, (Major from 8/1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. 5/16 Inch - 24 UNF Thread. 81804882, 957E7213, NAA7209A Note, this part may arrive spherical as shown, or more flattened like BB7213A. This part is differentiated by 5/16 Inch - 24 UNF Thread. (Part No: C5NN7213A)
$2.10

Sliding Coupling - This Sliding Coupling is used in Ford tractors 1965 and later with 6 speed transmission. Replaces C5NN7106A, 81804736 (Part No: C5NN7106A)
$47.98

Spider Cross, Differential - For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. Replaces C5NN4211B, E1NN4211AA, E1NN4211AB, 81876885, 83929928 (Part No: E1NN4211AA)
$48.00

Spider Gear - Gear, Differential Spider. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Major, Super Dexta, Super Major. Replaces 81728114, 957E4292B, E1ADDN4213B. (Part No: DDN4213B)
$38.76

Transmission Countershaft Seal - This Transmission Countershaft Seal replaces original part number E62GE9. New Holland 81717077. It measures 2.885 inches x 1.649 inches x 0.625 inches. (Part No: E62GE9)
$5.36

Transmission Front Plate Gasket - This gasket is used on 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 2610, 2910, 3610, 2910, 4610, 5610, 6610, 7610, 7710. Replaces E6NN7N057AA. (Part No: E6NN7N057AA)
$7.96

Transmission Gasket Set - Transmission Gasket Set for 3 cylinder Fords, 1965 and up with 6 or 8 speed Non-Synchro Transmissions. (Part No: S.65396)
$18.21

Transmission Mainshaft - 28/28 teeth, 17 spline, 12 inches long. For tractor models: 2000, 2110, 2120, 231, 2600, 4000, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, Super Dexta. (Part No: 960E7061A)
$239.00

Transmission Oil Cooler - For tractor models (231, 233, 333, 335, 531, 532, 2600, 3600, 4600 less cab), (7000 6/1973 and up). (Part No: D3NNH860A)
$271.25

Transmission Oil Cooler - For tractor models (233, 333, 335, 532, 2600, 3600 all with cab), 230A, 234, 334, 530A, 2310, 2610, 2810, 2910, 3610, 3910, 3930, 4110, 4130, 4610, 4630, 4830, 5030, 5600, 6600, 7600. (Part No: D4NNH860A)
$158.00

Transmission Oil Dipstick - Also replaces E1NN7A020BA, D3NN7A020B and 81842758. For models: 340A, 340B, 345C, 345D, 515, 535, 540, 545, 230A, 231, 2310, 233, 234, 250C, 260C, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 445A, 4600, 4610, 4630, 4830, 5030, 530A, 531, 532. (Part No: 83929967)
$7.76

Transmission Output Shaft Seal - Measures 39.4mm inside diameter x 60.3mm outside diameter x 12.7mm wide. It replaces C5NN77086A, 81808572, D66412, D40772, 363514R93, 70800166, ATY3988, ATY4067, AM848T, AP19243H, ATY4124, 1860325M1, 195506M1, 1077452M1 (Part No: C5NN77086A)
$4.40

Transmission Rear Coupling - This a a paired set used on many Ford New Holland Models. Replaces OEM part numbers 83908698, 82983825, 83960027, E6NN7N072BA, D6NN7N072B (Part No: E6NN7N072BA)
$55.79

Electrical System
Alternator - 12 volt, 37 amp. For tractor models 230A, 231, 233, 234, 2600N, 2600R, 2600V, 333, 334, (335 from 1975-1978 & 1983-1984), 340, 340A, 340B, 3600N, 3600NO, 3600R, 3600V, 3610NO, 3900, 3910H, 3910N, 3910R, 4110N, 420, 445, 445A, 4600NO, 4600O, 4600SU, 4610O, 4610SU, 515, 530A, 531, 532, 535, 550, 6410, 6600C, 6600O, 6610O, 4600C, 7610O, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700, A62, A64, A66, TW10, TW20, TW30. Replaces 89NY10300AA, D5NN10300A, D5NN10300BA, D5NN10300D, D5NN10300E, D5NN10300ER, 8AL2049K, 8AL2056K (Part No: D5NN10300E)
$108.00

Battery Cable - Battery Cable less boot, 36-1/2 inches long, battery to relay, 2 Gauge. For tractor models 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5200, 5600, 5610, 6600, 6610, 7000, 7610. (Part No: D2NN14300C)
$18.00

Battery Cable - This Battery Cable is 34 inch, 2 Gauge, and usually used as battery to ground. For 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4600, 4610, 5000, 5110, 5600, 5610, 5910, 6410, 6600, 6610, 6810, 7600. (Part No: C7NN14301C)
$8.96

Distributor Assembly, Complete - This new, Complete Distributor is an improved design using a Mechanical Advance. Fits Ford 3 cylinder tractors from 1965-1980. Fits 2000, 2100, 2110, 2120, 2150, 2300, 230A, 2310, 234, 2600N, 2600R, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3910H, 3910N, 3910R, 4000, 4100, 4110, 4110N, 4140, 420, 4200, 4330, 4340, 4400, 445, 445A, 450, 4500, 4600NO, 4600O, 4600SU, 4610N, 4610NO, 4610O, 4610SU. Tune-up parts interchange with the original. Replaces 47573265, 47821367, C7NF12127D, F0NN12100AA, F1NN12100AA. (Part No: F1NN12100AA)
$141.00

Distributor Cap - Distributor Cap for 3-cylinder engine on: 2000, 2600, 3000, 3600, 4000, 4100, 4600. (Part No: C5NF12106A)
$10.16

Distributor Dust Cover Assembly - Dust Cover Assembly for Distributor Breaker. For 3 and 4 cylinder gas engines. Tractors with Motorcraft Distributor: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 and up). Replaces C5NF12239A. (Part No: C7NF12239A)
$22.00

Distributor Dust Cover Seal - Seal for part number C7NF12239A. Replaces: 238-5147; 47107952; 70926559; V120471; X3430402; 190003120871; 379225S91; 383018R1; 81816534; 83972230; 87148S91; 87759736; 87760685; V48164 (Part No: S.11453)
$1.38

Distributor Rotor - Rotor. Fits 2000, 3000 and 4000 1965 and up. Fits 2600, 3600, 4100 and 4600 1975 and up. Fits 5000 1965-1975. Fits 5600, 6000 1975 and up. Replaces 21A355, C5NF12200A, 500868, C5NF12200AGV. (Part No: C5NF12200A)
$3.80

Dust Cover - Automatic dust covers. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 5900, 600, 6600, 700, 800, 900 (Part No: 9507-4-1H)
$17.50

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Part No: E7NN11N501AB)
$10.86

Ignition Switch, Keyed - This three position Ignition Switch has 5 terminals. Gas or diesel without cold start.It is widely used on Ford / New Holland Tractors 1965 and later. Comes with 2 keys. Replaces C5NN11N572A, D3NN11N572A, 81806736, 81838693, 82849165. (Part No: D3NN11N572A)
$23.00

Ignition Tune Up Kit, Complete, 3-Cylinder - Fits original Motorcraft Distributor. Kit includes, points, condenser, rotor, distributor cap, dust cover, custom fit spark plug wires, 3 Autolite AL405 spark plugs. For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. 3 cylinder models only. Replaces S.66642, Verify correct spark plug size and type (Part No: FD3CYLTK)
$65.99

Manifold Heater - Thermostart Intake Manifold Heater. Diesel cold weather starting aid. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710. Replaces C5NE9A436A, E1NN9A436AA, 603922, 87800843, 83933675, 81806046 (Part No: 3583543M2)
$14.26

Spark Plug - Replaces Autolite AL216, AL7, AL295 and Champion H8, H8J, H10, H11, H12, J8 spark plugs. For tractor models 1965 and up 2000, 3000, 4000, 1975 and up 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch gas engines. Price is for 1 plug. If you need 4, you need to order 4. Verify correct spark plug size and type. (Part No: AL295)
$1.86

Spark Plug - For 3 cylinder engines For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. (Part No: AL405)
$2.20

Spark Plug - 3 Cylinder Engines. For 1965 and up: 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Price shown is for each, sold only in multiples of 4 items. (Part No: AL216)
$2.00

Spark Plug Wire Set - 3 Cylinder, Custom - Premium quality leads have OEM style boots, are silicone with stainless steel core and are custom cut to length for 3-cylinder gas engines (1965 and newer) on: 2000, 2600, 3000, 3600, 3610, 4000, 4600. (Part No: DHPN12259A)
$33.99

Starter - New Starter with Drive for Gas Engine 1965 and later, on: 2000, 2030, 3000, 4000, 4110, 2600, 3600, 4600, 2610, 3610, 4610, 230A, 231, 234, 334, 335, 340, 340A, 3400, 3500, 420, 4400, 4500, 445, 530A, 531, 535, 540A, 545, 550, 555. Replaces S-2014, SFD0089, C5NF-11001-B, C5NF11001B, C7NF-11001-B, C7NF11001B, D0NF-11001-A, D0NF11001A, D1NN-11001-A, D1NN11001A, D7NN-11001-A, D7NN11001ARXL, HD7NN11001AR, SA-640, SA640, SG-0060R, S4531, 1100-0112, 2-1813-FD, 3130, 3139, 3139N, 41-3139, 410-14005R, 44-4232, 62006, 72-3139, 91-02-5799, 99000 (Part No: D7NN11001A)
$123.16

Starter, DIESEL engines - *** USE SLU0002 **** New Starter with Drive for most DIESEL Engines in models 2000 thru 8830. 5 inch diameter Starter. Note difference in Solenoid end of part number 83981923. Bendix has 10 teeth. May replace 9 tooth Starters. Verify part number before ordering. (Part No: D8NN11000CE)
$143.00

Starter, Diesel, Gear Reduction - Gear Reduction Starters offer higher torque than a direct drive starter. This can be useful for diesel engines. This is a gear reduction replacement for our part SLU0002. Replaces 81833782, 81859494, C7NN11000C, D4NN11000A, D0NN11000A, D2NN11000A, 81859398, 81826488, D7NN11000A, D6NN11000A, D8NN11000CD, D8NN11000CB, D8NN11000CA, E2NN11000AA, D2NN11000B, D5NN11001A, D4NN11000B, D7NN11000B, D8NN11000DA29Z, D8NN11000CE, E3NN11000AA, D9NN11000AA, K262761, K308650, LRS212, 26395, 26211, 26339A (Part No: 80855520)
$165.23

Starter Drive - Starter Drive for original Ford and Tisco 5 inch diameter starter D8NN11000CE. For tractor models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Part No: E4NN11350AA)
$25.00

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Part No: C7NN7A247A)
$10.90

Starter Safety Wire Assembly - For tractor models (2000, 3000, 4000 with 6 or 8 speed trasnmissions 10/1966 to 1975), 2600, 3600, 4600, 2610, 2810, 2910, 3610, 3910, 4610, 230A, 231, 250C, 260C, 335, 340, 340A, 340B, 345D, 420, 445, 445A, 445C, 445D, 530A, 531, 540, 540A. Replaces D4NN7A488B, D4NN7A488BB, E4NN7A488BB, E4NN7A488CA, 81827298, 83948129, 83963950 (Part No: D4NN7A488BB)
$21.50

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford / New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford / New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Part No: E2NN11390AA)
$18.26

Starter Solenoid - For Starter D8NN11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12/1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (1981-1983), 2810 (1984-1990), 2910 (1983-1990), 3310 (1965-1974), 4000 series (1965-1974), 4100 (1975-1981), 4110 (1981-1990), 4600 (1975-1981), 4610 (1981-1990), 5340 (1968-1974) 6600 gas 1975-1981, 7000 series (1971-1974). NOT FOR D8NN11000CE 5 inch starter. (Part No: D7NN11390A)
$23.00

Starter Solenoid, 12-Volt - Relay assembly, 12 volt, 4 terminal. For most 12 volt GAS models 1955 and later including: 1100, 2000, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 3500, 360, 3610, 3900, 3910, 4110, 4140, 420, 4330, 4340, 4400, 4410, 445, 450, 4500, 4600, 4610, 5000, 5110, 515, 530, 531, 5340, 535, 540, 545, 550, 5600, 5610, 5700, 5900, 6410, 655, 6600, 6610, 6710, 6810, 7000, 7410, 7600, 7700, 7710. Replaces 311007FR. I terminal DOES ground through the base. (Part No: D2AF11450AA)
$9.90

Tune Kit, Basic - This Basic Tune Kit contains points, condenser, rotor. For 3 cylinder gas tractor models: 2000, 3000, 4000 from 1965 and up, 2600, 3600, 4100, 4600 from 1975 and up. (Part No: ATK6FXR)
$14.76

Tune Kit, Basic - This Basic Ignition Tune Kit is for 3 cylinder gas tractor models 1965 and later. 2000, 3000, 4000. 1975 and up: 2600, 3600, 4100, 4600. Engine size: 158, 175, 192, and 201 cubic inch GAS. Tune up kit, contains point set, condenser, rotor and (3) Autolite AL405 spark plugs. Verify correct spark plug size and type. (Part No: 309788)
$21.62

Voltage Instrument Stabilizer - For (2000, 3000, 4000, 5000, 7000, 1965-1975), (2600, 3600, 4100, 4600, 5600, 6600, 7600, 1976 to 1981). Voltage Stabilizer for instrument cluster replaces C5NN10N507A. (Part No: C7NN10N507A)
$16.76

Voltage Regulator, 12 Volt - Voltage Regulators for Motorola Style Alternator, numbers D5NN10300E, D5NN10300D, D6NN10300A, D7NN10300B or D5NN10300D used on models 231, 2310, 233, 234, 2600, 2610, 340, 340A, 3600, 3900, 4100, 420, 445, 4600, 515, 531, 532, 535, 540, 540A, 545, 550, 555, 555A, 555B, 5600, 5700, 650, 655A, 6600, 6700, 755, 755A, 755B, 7700, 8700, 9700. All with diesel engines and an alternator. Replaces D1NN10316A, D1NN10316B, 21A656, D7NN10316B, D3NN10316A. (Part No: D1NN10316A)
$32.26

Engine Bearings
Camshaft Bearing - Single Camshaft Bearing fits the following gas and diesel tractors 1965 and up: 2000, 3000, 2600, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 7610, 7710, 8000, 8200, 8600, 8700, TW10, 9000, 9200, 9600, 9700. (Part No: C5NE6261B)
$4.96

Main Bearing Set, 158, 175 & 201 Gas or Diesel & 192 Gas, .020 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. For tractor models 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633-020)
$56.58

Main Bearing Set, 158, 175 & 201 Gas or Diesel & 192 Gas, .030 - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. For 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633-030)
$78.51

Main Bearing Set, 158, 175 & 201 Gas or Diesel & 192 Gas, STD - Replaces 3-CFPN6333B and 1-EBPN6337B. 1 kit used per engine. Non-Flanged Main Bearings. Flanged Thrust Bearing. For 2000, 2600, 3000, 3600, 4000, 4600. (Part No: MBK633)
$74.00

Rod Bearing, .010 - SINGLE Rod Bearing (.010 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Part No: DFPN6211D)
$9.16

Rod Bearing, .020 - SINGLE Rod Bearing (.020 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Part No: DFPN6211E)
$9.16

Rod Bearing, .030 - SINGLE Rod Bearing (.030 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Part No: DFPN6211F)
$9.16

Rod Bearing, .040 - SINGLE Rod Bearing (.040 size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Part No: DFPN6211G)
$7.16

Rod Bearing, Standard - SINGLE Rod Bearing (standard size) for the following 3-Cylinder Gas or Diesel Engines: 158, 175, 192, 201 and the following 4-Cylinder Diesel Engines: 233, 256 and the 401 6-Cylinder Diesel Engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10. (Part No: DFPN6211B)
$8.70

Engine Gaskets
Block to Rear Engine Plate Gasket - Block to Rear Engine Plate. Fits Ford tractors 1965 and later, gas and diesel. Replaces original part numbers C7NN6N008B, 81820964, C7NN6N008A, VPC5310, 1820964. (Part No: C7NN6N008B)
$4.40

Bottom Gasket Set, 158 or 175 CID Gas-Diesel - Lower gasket set fits 3 cylinder gas or diesel engines. Contains Front and Rear Crankshaft Seals. For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600. (Part No: EAPN6A008A)
$37.76

Crank Seal, Front - Fits 3, 4 and 6 Cylinder Engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. 60MM X 89MM X 12MM. Replaces 81813951, 81815927, 83999512, 1815927, F0NN6700CA, 83908809, 87800348, 87800696, 87802755, C5NN6700A, D5NN6700A (Part No: D5NN6700A)
$7.46

Crankshaft Seal, Rear - This Rear Crankshaft Seal is for 3, 4 and 6 Cylinder Engines (some gas and some diesel- not all) in models 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30. Replaces D5NN6701A, D4NN6701A, C5NE6701A, C5NE6701C2, E5NN6701AA, E5NN6701BA, F0NN6701AA, 3955247, D8NN6701BA, 87802757, 83934345, 83934611, 83955247, 81869937, 83905794, 3952004, 87357537, 83904709, E2NN6010AC, E2NN6010BD, E2NN6701BA, E1NN6010KE, E1NN6010ME, 83952004, E4HN6701AA, E3NN6701BA, E2NN6010CD, E1NN6010GD, E1NN6010FE, 83943999, 83916918, 87800322, 83999513, 81813207 (Part No: E5NN6701BA)
$11.56

Head Gasket - For tractor models 2600, 3600. (Part No: D3NN6051E)
$22.50

Head Gasket Set, 158 or 175 CID Gas & Diesel - Cylinder head gasket set with head gasket. Fits 158 or 175 CID 3-cyl 4.2 inch bore Gas & Diesel engine in: 231, 233, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, & 3910. (Part No: HS2300)
$23.40

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Part No: F0NN6710AA)
$7.76

Overhaul Gasket Set - For tractor models 2600 1976-1980, 2610 1981 & up, 3600 1976-1980, all with Diesel Engine. Overhaul Gasket Set includes Head Gasket, Upper Set and Lower Set (Part No: FS2302)
$92.92

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Part No: E9NN6N305AB)
$3.56

Top Gasket Set - Top gasket set For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. All with 158 CID diesel engine. Does NOT include head gasket. (Part No: CFPN6008A)
$52.00

Top Gasket Set - Top Gasket Set For 2000, 2600, 3000, 3600, 4000, 4600. All with 3 Cylinder Gas or Diesel Engine. Does NOT include Head Gasket. (Part No: CFPN6008B)
$24.50

Upper Gasket - Cylinder head gasket set with head gasket. For 2600, 3600, gas 3 cylinder 158 and 175 CID Engines. (Part No: HS2302)
$41.14

Valve Cover Gasket, 3 CYL - Gasket, Valve Cover. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 420, 4600, 4610, 515, 530A, 531, 532, 535. (Part No: C7NN6584B)
$3.06

Engine Rebuild Kits
Basic In-Frame Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Basic in frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1750G)
$520.33

Basic In-Frame Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Basic in-frame kit with .020 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1752G)
$550.83

Basic In-Frame Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore Basic in-frame kit with .040 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600, 3600. (Part No: BIFF1754G)
$542.84

Basic In-Frame Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic in-frame kit. Contains standard pistons, rings, valve grind gasket kit, oil pan gasket. (D4NN6108A) For 2600. (Part No: BIFF1590D)
$383.64

Basic In-Frame Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic in-frame kit. Contains .020 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1592D)
$506.31

Basic In-Frame Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic in-frame kit. Contains .030 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1593D)
$402.26

Basic In-Frame Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic in-frame kit. Contains .040 inch oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 2600. (Part No: BIFF1594D)
$393.88

Basic Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Basic Engine Kit contains, standard pistons, rings, pin bushings, complete gasket kit. Less rod and main bearings. Order bearings separately. For 2600, 3600. (Part No: BEKF1750G-LCB)
$569.03

Basic Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Basic Engine Kit, less rod and main bearings with .020 inch oversize pistons C5NN6108H, rings, pin bushings, complete gasket kit. Order bearings separately. For 2600, 3600. (Part No: BEKF1752G-LCB)
$632.68

Basic Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Basic Engine Kit, less rod and main bearings with .040 inch oversize pistons D2NN6108D, rings, pin bushings, complete gasket kit. Order bearings separately. For 2600, 3600. (Part No: BEKF1754G-LCB)
$591.55

Basic Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic Engine Kit. Contains, standard pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1590D-LCB)
$413.96

Basic Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic Engine Kit. Contains, .020 inch oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1592D-LCB)
$513.48

Basic Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic Engine Kit. Contains, .030 inch oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1593D-LCB)
$429.55

Basic Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Basic Engine Kit. Contains, .040 inch oversize pistons, rings, pin bushings, complete gasket kit. For 2600. (Part No: BEKF1594D-LCB)
$421.60

Engine Overhaul Kit with Crankshaft - Used on 158 CID Three Cylinder Diesel Engine. 4.2007 inch standard bore. This kit includes: Pistons, Pins, Rings, Retainers, overhaul gaskets set with crankshaft seals, new crankshaft, rod bearings and main bearings. This is a non-sleeved engine. If you need to sleeve your engine back to standard, sleeves are available as part number C5NN6055A. The crankshaft in this kit is a 4.20 inch stroke. This will replace the original 3.8 inch stroke crankshaft found in many 158 CID diesel engines because the piston compression height in this kit are matched to the stroke of the crankshaft. (Part No: EKMC27)
$863.69

In-Frame Engine Kit - For 2600 Series, 3600 Series, both with 158 and 175 CID gas 3 cylinder engine, 4.2 inch standard bore 3.8 inch stroke. Contains: pistons with pins, rings, upper gasket set, head gasket, carburetor base gasket and oil pan gasket. Specify Piston size of Standard, .020 inch oversize or .040 inch oversize in comments section when ordering. (Part No: BIFF175xG)
$542.84

In-Frame Engine Kit - For 2600 series tractors with 158 CID Diesel 3 cylinderr 4.2 inch standard bore engines 1975 to 1981. Contains pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify piston size of: Standard, .020 inch, .030 inch or .040 inch oversize in comments section when ordering. (Part No: BIFF159xD)
$345.76

Overhaul Kit - Complete overhaul kit for Diesel 2600 With 158 cubic inch engine. Contains complete gasket set, piston and ring set (available in Std., .020 .030 or .040 oversize), rod bearings (available in Std., .010, .020 .030 or .040) and main bearings (available in Std., .010, .020, or .030), standard camshaft bearings, intake and exhaust valves. (Part No: EOKF1590D)
$663.97

Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Engine overhaul kit with standard pistons, rings, pin bushings, complete gasket kit, cam bearings, intake and exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1750G-LCB)
$692.48

Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas. Engine overhaul kit with .020 inch oversize pistons, rings, pin bushings, complete gasket kit, cam bearings, intake and exhaust valves, springs, valve keys. Less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1752G-LCB)
$644.88

Overhaul Kit, 158, 175 Gas - 158 or 175 CID 3 cylinder gas, 4.2 inch standard bore. Engine overhaul kit with .040 inch oversize pistons, rings, pin bushings, complete gasket kit, cam bearings, intake and exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 2600, 3600. (Part No: EOKF1754G-LCB)
$716.28

Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Engine overhaul kit. Contains: standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1590D-LCB)
$497.34

Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Engine overhaul kit. Contains: .020 inch oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1592D-LCB)
$566.63

Overhaul Kit, 158 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Engine overhaul kit. Contains: .040 inch oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1594D-LCB)
$506.96

Overhaul Kit, 159 Diesel - 158 CID 3 cylinder diesel 4.2 inch standard bore. Engine overhaul kit. Contains: .030 inch oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake and exhaust valves, springs, valve keys. For 2600. (Part No: EOKF1593D-LCB)
$514.91

Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, .015 O/S Valve Stem - 158 CID, 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with 3 intake valves, 3 exhaust valves, 6 valve springs, 12 valve keepers. For tractor models 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: VTK158-15)
$107.00

Valve Overhaul Kit, 175, 192, 201 Gas or Diesel, Std. Valve Stem - 175 CID, 192 CID, 201 CID gas or diesel engines. Kit comes with 3 intake valves, 3 exhaust valves, 6 valve springs, 12 valve keepers. For tractor models 2000, 2600, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: VTK158)
$69.33

Engine Parts
Ball Type Governor with Umbrella - For the following Ford models made after 1965: 2000 (3 cylinder), 2600, 3000, 3600, 4000 (3 cylinder), 4600, 5000, 5600. Replaces 377509-S, 500901, 81806923, 81817221, 83417081, C5NE12471A, and C5NE12B462A. (Part No: C7NN12471A)
$151.80

Camshaft - For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610, 4100, 3055, 3100, 335, 340, 3400, 3500, 3550, 3900, 3910, 4110, 4140, 420, 4200, 4400, 4410, 4500, 515, 532, 535, 545, 550, 555, ALL 3 CYLINDER DIESELS. 3610, 3910, BOTH GAS ENGINES. Camshaft also replaces C7NN6250E, 87800323. (Part No: E8NN6250AA)
$137.00

Camshaft Plug - Used on Ford engines: 158, 175, 192, 201, 233, 256, 268, 401 this camshaft plug replaces part numbers C5NND851B, 83994133, C5NND851A, 1816594 (Part No: C5NND851B)
$33.76

Connecting Rod Assembly (36mm Journal) - New. Replaces C7NN6200A, E3HN6200AC, E4NN6200AB, E9NN6200AB, E9NN6200CA, F9NN6200AB, 81864279, 81875622, E3HN6200AC42, F2NN6200BA (*NOTE: Replace the complete set when replacing C5NE6200A Gas 1965-3/1968).C7NN6200A (Part No: C7NN6205)
$87.00

Connecting Rod Bolt - These Connecting Rod Bolts are for gas and diesel Models: 1965 to 1975 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 7/16 diameter. Priced each. (Part No: E4TN6214AA)
$3.00

Crankshaft Pulley Spacer - Used on many Ford / New Holland models, 1965 and later, this is a keyed spacer. It fits behind the crankshaft pulley. Replaces OEM part numbers 83995427, 1811427, 81811427, C5NE6B306A, C5NE6C306A (Part No: C5NE6B306A)
$15.00

Crankshaft Repair Kit - Speedi Sleeve Crankshaft Repair Kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: 99472)
$125.59

Flywheel With Ring Gear - This new flywheel includes E2NN6384AA - 128 tooth ring gear. It is used on tractors with 11 inch clutches. Replaces C7NN6375H, E0NN6375LA. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: E0NN6375LA)
$870.00

Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Part No: 390625S)
$1.66

Idler Pulley With Bracket - This Idler Pulley With Bracket is used on multiple Ford / New Holland Agriculture and Industrial models. It replaces part numbers 83986807, E6NN8A614AB (Part No: E6NN8A614AB)
$132.00

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Part No: C5NE6571A)
$4.40

Push Rod - For 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7700, 231, 233, 333, 420, 515, 532, 535. All with 3 or 4 cylinder Diesel from 1975 to 1981. Push Rod 12.17 inches long. (Part No: C5NE6567B)
$7.94

Rear Engine Seal Retainer - Used Ford / New Holland engines BSD442, BSD444, BSD444T, BSD666, BSD666T on equipment 1975 and later. The retainer is used with E5NN6701BA crankshaft seal and E9NN6N305AB gasket, sold separately. This part replaces original part numbers E5HN6N306AB, E5HN6N306AC, 81868536 (Part No: E5HN6N306AB)
$133.00

Ring Gear, Flywheel - This New Starter Flywheel Ring Gear has a 14.634 inside diameter, a 16.245 outside diameter and 162 teeth. It is used on the following gas tractors built 1965 and later: 2000, 230, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 3500, 3600, 3610, 4000, 4100, 4110, 420, 4400, 445, 4500, 4600, 4610, 5000, 530, 531, 532, 535, 540, 545, 550, 5500, 555, 5550, It replaces original part number C5NE6384B. (Part No: C5NE6384B)
$144.00

Ring Gear, Flywheel - For gas and diesel. Measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Part No: E2NN6384AA)
$27.26

Rocker Arm - Rocker Arm for Exhaust Valve. For 3 -4 and 6 cylinder tractor models, 1965 and later. 2000 3 cylinder, 3000, 4000 3 cylinder, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. Replaces 81804316, C5NE6529A, D5NE6529A (Part No: C5NE6529A)
$16.53

Rocker Arm - Rocker Arm, for Intake Valve. Replaces D9NN6529AA. For 3 cylinder tractor models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Part No: D9NN6529AB)
$25.98

Tappet, Diesel Engines - Tappet, 2.06 inches long, .990 inch diameter. DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. (Part No: C5NE6500C2)
$7.86

Timing Gear, Crankshaft - 26 Teeth, Internal Keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401 and 401T Engines. For tractor models 231, 233, 234, 333, 334, 335, 340, 420, 445, 515, 531, 532, 535, 540, 545, 550, 555, 655, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3310, 3330, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330. Replaces E3NN6306BA, C5NE6306A, E3NN6306BA, 3NN6306BA. (Part No: C5NE6306A)
$42.51

Valve, Exhaust - Standard Exhaust Valve for tractor models 2600, 3600, 4600, 5600, 5700, 6600. (Part No: D3NN6505A)
$9.77

Valve, Exhaust Oversize - Oversize Exhaust Valve, .003 inch oversize stem. For tractor models 2600, 3600, 4600, 5600, 5700, 6600. (Part No: D3NN6505B)
$16.76

Valve, Intake - Standard Intake Valve for 2600, 3600, 4600, 5600, 5700, 6600, 6610, 6700, 6710, 8700, TW10. (Part No: D3NN6507A)
$3.10

Valve, Intake Oversize - Intake Valve, .003 inch oversize stem. For 2600, 3600, 4600, 5600, 5700, 6600, 6610, 6700, 6710, 8700, TW10. (Part No: D3NN6507B)
$10.39

Valve Service Kit - This Valve Service Kit is for tractor models 2000, 2600, 3000, 3600, 4000, 4600. Contains: springs and locks, (no valves). (Part No: VSKF158)
$33.12

Valve Spring - Used on for 158, 175, 192, 201, 256, 268 and 401 CID gas and diesel engines. One used per valve. It replaces C7NN6513A, D6NN6513A, 81817098, 83911693. (Part No: D6NN6513A)
$2.06

Engine Pistons and Sleeves
Piston - .040 inch oversize, standard bore 4.2 inch. For tractor models 2000, 2600, 3000, 3600 with either 158 or 175 CID 3 cylinder gas engines. Piston compression height of 2.939 inches. Includes Rings. (Part No: D2NN6108D)
$156.04

Piston, .020 - Piston with pin and rings .020 inch oversize. For tractor models 2000, 2600, 3000, 3600. 158 Gas Engine. 4.2 inch bore + .020. Piston compression height of 2.939 inches. Verify compression height before ordering. (Part No: C5NN6108H)
$162.18

Piston, 158 Diesel, .020 - .020 inch oversize piston. For tractor models 2000, 2600. Contains: (1) Piston with pins and retainers. (Part No: D4NN6108C)
$169.91

Piston, 158 Diesel, .030 - .030 inch oversize piston. For tractor models 2000, 2600. Contains: (1) Piston with pins and retainers. (Part No: D4NN6108D)
$93.87

Piston, 158 Diesel, .040 - .040 inch oversize piston for 158 Diesel on 2000, 2600. Contains: (1) Piston with pins and retainers. 2.964 inch compression height. (Part No: D4NN6108E)
$117.71

Piston, 158 Diesel STD - Standard bore piston For 158 Diesel on 2000, 2600. Contains: (1) Piston with pins & retainers. (Part No: D4NN6108A)
$93.87

Piston and Ring Kit - 158 Diesel .020 - .020 inch oversize piston and ring kit for 158 Diesel (4.2 inch Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-020)
$327.96

Piston and Ring Kit - 158 Diesel .030 - .030 inch oversize piston and ring kit for 158 Diesel (4.2 inch Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-030)
$363.40

Piston and Ring Kit - 158 Diesel .040 - 040 inch inch oversize piston and ring kit for 158 Diesel (4.2 inch Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158-040)
$363.40

Piston and Ring Kit - 158 Diesel STD - Standard size piston and ring kit for 158 Diesel (4.2 inch Std bore) on 2000, 2600. Contains: (3) pistons with rings pins and retainers. (Part No: PRK158)
$319.95

Piston Pin Bushing - Fits 158 CID gas and diesel, 175 CID gas and diesel, 192 CID gas, 201 CID diesel, 233 CID diesel, 256 CID gas and diesel and 268 CID diesel. For tractor models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710. (Part No: C5NE6207A)
$4.30

Piston Sleeve, 4.2 Inch Bore - This is a semi-finished straight sleeve (no lip) for 4.2 inch bore engines. It is used when boring non sleeved engines. Inside diameter 105.530mm (4.200 inches). Outside diameter 110.870mm (4.362 inches). Overall height 209.550mm (8.250 inches). Replaces 81815327, 87295246, C5NN6055A (Part No: C5NN6055A)
$30.76

Piston Sleeve, Semi Finished, 4.2 Inch Bore - Used when boring Non Sleeved Engine. Liner inside diameter 4.2 inch, outside diameter 4.35 inch. For tractor models 175 CID Diesel on; (2000 1965-1975), (2600 1975-1981), (3000 1965-1975), (4000 1965-3/1968). 192 GAS engine on; (3610 1981-4/1982), (3910 1981-4/1982), 233 Diesel engine on; (5000 1965-3/1968). (Part No: SD756)
$36.84

Piston with Pin - Standard piston bore size 4.2 inches. For tractor models 2000, 2600, 3000, 3600. All with either 158 CID or 175 CID 3 cylinder gas engines and piston compression height of 2.939 inches. Verify compression height before ordering. (Part No: C5NN6108F)
$151.37

Piston with Rings - 4.2 inch standard bore. For tractor models (2000, 3000 1965-1975), (2600, 3600 1975-1981). All with either 158 CID or 175 CID 3 cylinder gas engines and piston compression height of 2.939 inches. Verify compression height before ordering. (Part No: RK150)
$260.00

Engine Rings
Piston Rings, Diesel, .020 - Piston Rings FOR 1 PISTON, Diesel 4.2 inch bore, 3 and 4 Cylinder Engines, 158, 175 and 233 CID. .020 inch Oversize Ring Kit for 1 Piston. For: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AT)
$24.65

Piston Ring Set, Diesel, .030 - Diesel 4.2 inch bore, 3 and 4 Cylinder Engines, 158, 175 and 233 CID. .030 inch Oversize Ring Kit for 1 Piston. For: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AU)
$29.45

Piston Ring Set, Diesel, .040 - Diesel 4.2 inch bore, 3 and 4 Cylinder Engines, 158, 175 and 233 CID. .040 inch Oversize Ring Kit for 1 Piston. For: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AV)
$21.75

Piston Ring Set, Diesel, STD - Diesel 4.2 inch bore, 3 and 4 Cylinder Engines, 158, 175 and 233 CID. Contains 3 Compression Rings at 3/32 and 1 Oil Ring at 3/16. Standard Ring Kit for 1 Piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AS)
$11.93

Piston Ring Set, Gas, .020 - For tractor models 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 & 175 CID 3-Cylinder gas engine with. This a set for one piston. Three sets needed per engine. (Part No: CFPN6149AZ)
$23.78

Piston Ring Set, Gas, .040 - For tractor models 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 and 175 CID 3-cylinder gas engines. This is a set for one piston. Three sets needed per engine. (Part No: CFPN6149BB)
$6.02

Piston Ring Set, Gas, STD - For tractor models 2000, 3000 (1965-1975), 2600, 3600 (1975-1981) with 158 and 175 CID 3-cylinder gas engines. This is a set for one piston. Three sets needed per engine. (Part No: CFPN6149AY)
$9.50

Exhaust System
Exhaust Manifold Gasket - For tractor models 550, 555, TW10, TW15, TW20, TW25, TW30, TW35, TW5, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 4000, 4600 with C5NE9430A manifold uses 1 gasket and models 8000, 8600, 9000, 9600 with C9NN9430B & C9NN9431B manifolds uses 2 gaskets. (Part No: C5NE9448A)
$4.11

Exhaust Manifold, Vertical - This Vertical Exhaust Manifold fits 3-cylinder tractors 1975 and newer models: 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 535, 540, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630. Does not come with gaskets. Mounting Gasket available as part number C5NE9448A. (Part No: D3NN9430A)
$38.00

Exhaust Pipe Gasket - This gasket is used with D6NN5246N Exhaust Pipe. (Part No: E0NN5C250BA)
$1.96

Exhaust Pipe, Horizontal - This Horizontal Exhaust Pipe measures 2 inches on the inside diameter of the inlet, 1 3/4 inches on the outside diameter of the outlet, is 24 inches in the vertical length and 47 inches on the horizontal length. For Diesel 2000, 3000 except 2300, 2310, 3300, 3310, all 1965 and up. For Gas 2000, 3000, 1965 and up. For 2600, 3600, 1975 and up. Underslung Exhaust Pipe, Manifold to Muffler Pipe. Use with MC200 Muffler Clamp. (Part No: C7NN5245B)
$32.00

Manifold, Exhaust, Horizontal - Horizontal Exhaust for the following 1965 and newer tractors with 3 Cylinder Gas or diesel: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 4000, 4600. Exhaust pipe fits over manifold outlet. **DOES NOT COME WITH GASKET** Order Gasket part number C5NE9448A. (Part No: C5NE9430A)
$34.50

Muffler - Horizontal Oval Muffler, Aluminized. Inlet 1-3/4 inch inside diameter, Outlet 1-3/4 inch outside diameter, Outlet Pipe length 8 inches, overall length 20-1/2 inches. For 2000, 2600, 3000, 3600, 4000, 5000. (Part No: C7NN5230G)
$41.76

Muffler - Vertical Round Muffler, Aluminized. This high quality Muffler has Internal Baffles. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter. Dimension A = 29 inches overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A and FO17. (Part No: C7NN5230JM)
$35.87

Muffler - Oval muffler, for vertical exhaust, black. Inlet 1-7/8 inch inside diameter, outlet 2 inch outside diameter, 49 inches overall length. For 2000, 230A, 231, 2600, 2610, 2810, 2910, 3000, 335, 3600, 3610, 3910, 420, 532. (Part No: E4NN5230FA17M)
$114.40

Muffler - For 2000, 3000, 2600, 3600, 2610, 3610, 340, 445, 540, 335, 420, 230A. Muffler - Highest Quality. Black Enamel Finish. (S.14518) (Part No: E4NN523OFA)
$83.00

Muffler, Black Enamel - Round muffler, black enamel. This high quality muffler has internal baffles. Inlet 1-7/8" I.D. Outlet 2" O.D., DIM A = 29" overall length. Inlet is not offset. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A & FO17. (Part No: C7NN5230JM-B)
$31.26

Fuel System / Air Intake
Air Cleaner Assembly - For tractor models 2000, 3000. Air Cleaner Assembly 6 inch diameter. Replaces C5NE9600A. These originally came in 6 inch or 7 inch diameter. (Part No: C5NE9600F)
$57.00

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 531, 5600, 5610, 5700, 540, 6000, 6600, 3600V, 4000SU, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600SU, 5100, 5200, 5340, 5900, 6610, 6700. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794. (Part No: R28794)
$15.45

Air Cleaner Cover - Twist locks into top of air cleaner. Diameter 6 1/4 inches. For tractor models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND: 230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS/DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS/DIESEL), 445, (515 GAS/DIESEL), 530A, 531, (532 GAS/DIESEL), 545. NOTE: FORD HAD MORE THEN ONE COVER PLEASE COMPARE YOUR TAB DEPTH AND DIAMETER BEFORE ORDERING. (Part No: C5NE9661A)
$63.00

Air Cleaner Cover Assembly - For tractor models 230, 231, 233, 234, 2600, 2600N, 2600V, 333, 334, 335, 3600, 3600N, 3600V, 3900, 4100, 4600, 515, 530, 531, 532, 5600, 6600, 7600. Replaces D0NN9661B, D1NN9661A, D5NN9661A, D8NN9661BA (Part No: D8NN9661AA)
$89.00

Air Cleaner Cover Assembly - This is an Air Cleaner Cover Assembly which measures 9 1/2 inch Diameter. For 3 cylinder tractor models 2600, 3600, 3900, 4100, 4600, 230A, 234, 333, 334, 340, 340A, 340B, 515, 530A, 531, 532, 540, 540A, 540B. Replaces D0NN9661B, D1NN9661A, D5NN9661A, D8NN9661BA (Part No: D8NN9643BA11Z)
$102.34

Air Cleaner Dust Collector - This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple Ford/New Holland models. It replaces original part numbers 81870839, D2NN9C673B, F0NN9C673AA. (Part No: T23262)
$8.36

Air Filter Element, Inner - Outside diameter top is 2-1/8 inches, outside diameter bottom 2-9/16 inches, inside diameter top 3/8 inches, inside diameter bottom 1 7/8 inches, height 10-5/16 inches. Inner Filter fits GAS tractors: (2000, 3000, 4000 all 1/1973>) 2600, 3600, 4600, 2610, 3610, 4610. Industrials: (2110LCG, 3400, 3550, 4110LCG, 4400, 4500 all 1/1973>), 230A, 231, 335, 340A, 420, 445A, 515, 531, 532, 535, 545. DIESELS: (3400, 3500, 3550 all 1/1973>), 335 (up to 5/1976), 420, (515, 531, 532, all up to 5/1976), 535, 550, 6500. Replaces D2NN9R500A515. (Part No: E6NN9R500DA)
$42.50

Air Filter Element, Outer - Outside diameter 4 1/2 inches, inside diameter 2 1/4 inches, height 10 11/16 inches. Outer Filter fits GAS tractors: 2000, 3000, 4000, 2600, 3600, 4600, 2610, 3610, 4610. Industrials: 2110LCG, 230A, 231, 3400, 3500, 3550, 335, 340A, 4110LCG, 4400, 4500, 420, 445A, 515, 531, 532, 535, 545. DIESELS: 3400, 3500, 3550, 335 (up to 6/1976), 420, (515, 531, 532, all up to 5/1976), 535. Replaces 1026131M92, D0NN9B618B, AF492, D0NN9B618B, C5NE9A641A, E6NN9B618AB, 81823386, E6NN9B618AA, C7NN9A641A, C7NN9A641C, D2NN9R500A. (Part No: E6NN9B618AA)
$19.49

Air Filter, Inner - 9-15/16 inches tall x 3 inches in diameter. For tractor models (550, 555 from 1975 to 7/1981), (555A, 555B from 1975 and later), (2600, 3600, 3900, 4100, 4600 from 4/1976 and later). (Part No: D6NN9R500A)
$31.50

Breather Cap - For Dry-Type Air Cleaners on gas tractors (2000, 3000, 4000, all 1965-1975), (2600, 3600, 4600, 231, 335, 515, 531, 532, all 1975-1981). For Oil Bath Cleaners on Diesel Tractors 2000, 3000 except 3500 and 3550, 4000 except 4500, all 1965-1975. For 2600, 3600, 231, 233, 333, all 1975 to 1981. Breather Cap for 2 inch air Intake Pipe. Cap is 6 1/2 inches tall. (Part No: C5NN9A660B)
$6.50

Carburetor Float, Holley - This Carburetor Float is for Holly Carburetors: 2871, 2871-1, 3257, R3210, R3656A, R3657, R3658, R4111, R4111A, R4119, R4119A, R4120, R4120-1, R6852, R6853, R7867, R7896, R8552, R8553, R8554. Tractors: 2000 (3 cylinder), 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3310, 3330, 3600, 3610, 4000 (3 cylinder), 4100, 4110, 4600, 4610, 5000, 5100, 5200, 6600. Industrials: 230A, 231, 335, 340, 420, 445, 530A, 531, 535, 545, 550, 555A, 555B, 3400, 3500, 4400, 4500. Replaces: 81810964, C5NE9550A, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA. (Part No: C5NE9550A)
$37.50

Carburetor Kit, Basic - Kit for Zenith carbs used on 2000 3 cylinder, 3000 3 cylinder, 4000 3 cylinder, 2600, 3600. Used on the following caburetors: 11637, 13358, 13466, 13486, 13501, 13502, 13519, 13520, 13521, 13524, 13550, 13584, 13596, 13628, 13628D, 13630, 13631, 13641, 13644, 13652, 13652C, 13683, 13700, 13707, 13724, 13745, 13758, 13760, 13760A, 13772, 13775, 13786, 13807, 13867, 13868, 13869, 13886, 13891, 13912, 13913, 13914, 13914A, 13915, 13916, 13917, 13920, 13940, 13958, 13963, 13974, 13987, 13999, 14000, 14001, 14022, 14023, 14034, 14039, 14039A, 14041, 14126, 14140, 14143, 14151, 14155, 14171, 14172, 14200, 14997, E1NN9510AA, E1NN9510BA, E1NN9510CA, E1NN9510DA, E1NN9510EA, E1NN9510FA (Part No: Z107)
$33.60

Carburetor Kit, Basic - For all Holley carburetors on Models Ford / New Holland TRACTOR: 2000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656, Ford / New Holland TRACTOR: 3000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656, Ford / New Holland TRACTOR: 4000 (1965-9/1966 with Holley Carb. numbers: R3657, R3656. CKPN9590B R3210, R3656A, R3657, R3658, R4111A, R4119A, R4120-1, R6852, R6853, R7867, R7896, C7NN9510A, C7NN9510B, C7NN9510C, D8NN9510AA, D8NN9510BA, D8NN9510CA, R3589B, ; Ford models with Holley carb number: LIST6852, R3012, R3013-4A, R3158A, R3210, R3658, R3658A, R4111, R4111-1A, R4119, R4119-1A, R4120, R4120-1, R4120-1A, R6863, R8552, R8553, R8554 (Part No: ABC427)
$41.78

Carburetor Kit, Basic - For 2000, 3000, 2600, 3600, 2610, 3610 all with Holley R4119, R4120, R8552 or R8553. (Part No: HCK02)
$30.00

Carburetor, New - This New Zenith Style carburetor outperforms the original carbs used on: 2600, 3000, 3400, 3600. New replacement Zenith carburetor. For 3 cylinder 175 CID engine. Replaces OEM# 13916, 13914, C5NE9510C, C5NN9510M, C7NN9510C, C9NN9510B, D3NN9510B, D6NN9510B, D8NN9510BA, D8NN9510C, E1NN9510BA, E1NN9510EA, R4100, R4120, R4120-1, R6863, R7893, R7896, R8553. Center to center on the 2 mounting bolts is 2 11/16 inches. Throttle linkage 3/4 inch from center of ball to center of shaft. (Part No: 13914B)
$236.41

Carburetor, New - Zenith carburetor outperforms the original carbs used on: 2600, 3600N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 340, 3400, 3500, 3600, 3600R, 3600V, 3610, 3610N, 3610V, 420. New replacement Zenith carburetor. For 3 cylinder 158 and 175 CID engine. Replaces OEM# C5NE9510C, C5NN9510M, C7NN9510C, C9NN9510B, D3NN9510B, D6NN9510B, D8NN9510BA, D8NN9510C, E1NN9510BA, E1NN9510EA, LIST6852, R3013-3, R4100, R4120, R4120-1, R6863, R7893, R7896, R8553 . Center to center on the 2 mounting bolts is 2 11/16 inches. The throttle linkage 3/4 inch from center of ball to center of shaft. Made in USA, 1 year warranty. (Part No: 13914)
$580.00

Choke Cable - 48.00 inch total length. For tractor models 2000, 3000, 4000, 2600, 3600, 4600, 231, 2110LCG, 335, 3400, 3500, 420, 4110LCG, 4400, 4500, 515, 535. (Part No: C5NN9700C)
$13.00

Diesel Injection Pump - For tractor models 2000 3 cylinder, 2310, 2600, 2810, 2910 with single filter, 231, 233. All with 158 CID Diesel engine. Replaces D6NN9A543F, E2NN9A543TA, E2NN9A543TB, CAV3233F661 and CAV3233F660. (Part No: 3233F661)
$678.20

Friction Disk for Hydraulic Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Part No: C5NN518B)
$1.00

Fuel Cap, Vented - 2-5/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3430, 3600, 3600V, 3610, 3900, 3910, 3930, 4000, 4030, 4031, 4040, 4100, 4110, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4500, 4600, 4600SU, 4610, 4630. (Part No: C5NN9030D)
$6.60

Fuel Cap, Vented - This silver Fuel Cap is for Under Hood Fuel Tank. 2-7/8 inch outside diameter, 1/4 inch tall, Zinc finish, 1.788 inch edge of tang to edge of tang. Vented Verify OEM number for tractor models 1100, 1120, 1120, 1200, 1210, 1215, 1220, 1300, 1210, 1320, 1500, 1510, 1520, 1620, 1700, 1710, 1715, 1720, 1900, 1910, 2110, 2120, 3415, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6000, 6600, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8530, 8630, 8700, 8700, 8830, 9000, 9200, 9700. Replaces 83961128, SBA360300080, E7NN9030AA. There are other Fuel Caps for some of these tractors please verify OEM number and measurements. (Part No: C5NN9030B)
$5.86

Fuel Filter Assembly, Double - Universal Double Fuel Filter Assembly fits most Ford Diesels 1965 and newer that use CAV type Double Filter Assembly. Comes complete with filters. Filter brands may vary. Replaces EBPN9N166AA, E5NN9165BA, C5NN9165C and D2NN9165C. This assembly has two connections on each side to accommodate 1 inlet and 1 outlet ON EACH SIDE. You may have to reconfigure your inlet and outlet hoses. 1/2 inch x 20 UNF Ports. Outer ports in, inner ports out. (Part No: S.60426)
$32.00

Fuel Filter Assembly, Single - This Fuel Filter assembly comes with a metal bowl. For Diesel tractors using CAV type injection system. Includes filter. Uses replacement filter CAV7111296. (Part No: S.60425)
$37.26

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Part No: 1446017M91)
$47.76

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Part No: 81825363)
$15.71

Fuel Injector - For tractor models 2600, 3600, 4600, 5600, 5700, 6600, 6700, 8600, 8700, TW10, 230A, 231, 234, 334, 335, 340A, 340B, 530A, 531, 540A, 540B D4NN9F593A (Part No: D0NN9F593A)
$42.57

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Part No: C5NE9F596A)
$2.20

Fuel Pump - For tractor models (2000, 3000, 4000, 5000 1965 and up), 2100, 2110, 2120, 2150, 2300, 231, 2310, 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 335, 3400, 3600, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4600, 5000, 5100, 515, 5190, 5200, 531, 5340, 5500, 5550, 6600. All with gas engines. Replaces 81805929, C5NE9350A, D5NN9350B, D5NN9350BGV, F2NN9350AA. (Part No: F2NN9350AA)
$38.00

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. (Part No: S40569)
$19.50

Fuel Sediment Bowl Assembly - This new Sediment Bowl Assembly is used on Ford Gas Tractors 1965 and later. It replaces original part number D4NN9155A. Replaces 83416255 Connector, C5NE9165D Cover, D4NN9155A Filter Assembly, C5NN9160A Gasket, C5NN9176A Filter, 86508531 Bowl, D4NN9C297A Bail. (Part No: D4NN9155A)
$42.00

Fuel Sender, Screw Held - For 3-cylinder tractors (1965 and newer): 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610. Industrials: 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 515, 531, 532, 535, 540A, 540B, 545, 545A, 545C, 545D. (Part No: 83943961)
$61.00

Fuel Shut-Off Cable - Cable is 48 inches long. For 3-cylinder (1965>) tractors: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630. Replaces C5NN9C331H, E5NN9C331EA. (Part No: S.67059)
$8.48

Fuel Shut-Off Cable - Cable Assembly, Fuel Shut-Off, 63 inch long. For Diesel Tractors 2000, 3000, 4000, 5000, 7000, (1965 to 1975); 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 233, 333, 335, 515, (1975 to 1981); 4610, 5610, 6610, 7610, 7710, with quiet cab (1981 to 1991). (Part No: E5NN9C331EA)
$9.30

Fuel Tank - For diesel models: 2000, 2100 (1965 and up), 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3150, 3300, 3310, 333, 3600, 3610, 3900, 3910, 4000SU (aka 4140), 4100, 4110, 4140 (1965-1974), 4610SU (1981-2/1990), 4600SU, 531 (1975-1981), L/FWD and L/CAB. Will replace gas fuel tanks but is not exactly like original - will bolt in, slight size and cap differences. The diesel fuel line return to the tank will have to be plugged. This tank uses C5NN9030D Cap, D8NN9A316KA Fuel Sending Unit, C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal, each sold separately. Replaces OEM part numbers C5NN9002AC, C5NN9200AC, E3NN9002AB. (Part No: C5NN9002AC)
$120.00

Fuel Tank Valve Tap - Metal Fuel Tap with Screen for Gas and Diesel: Major, Super Major, 2000 (1965 and up), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000 (1965 and up), 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5600, 5610, 5700, 5900, 6600, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30. INDUSTRIALS: 550, 555A, 555B, 655, 655A. Tank tap is 7/8" tapered by 14 pitch (1/2 pipe thread), fuel line is 1/2" by 20 pitch UNF (5/16 inch tubing nut). (Part No: E2NN9N024AA)
$7.86

Fuel Transfer Pump - Lift Pump, 2-bolt. Mounts to Injection Pump. For Super Major (8-1961/1964), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Transfer Pump. Used on 3, 4 and 6 Cylinder Diesel Engines. Replaces: 510E-9350, 3912071, 83991467, 86525137, D3NN9350A, D8NN9350AA, D8NN9350AB, DDN9355. Uses S40569 Repair Kit. (Part No: D8NN9350AB)
$22.26

Injection Pump Cover Plate - This Cover Plate is used with CAV injection pumps. Replaces Ford OEM nos C7NN9G578A, 81827350, 83903026, 83926998, D2NN9G578A, D4NN9G578A, E0NN9G578AA (Part No: E0NN9G578AA)
$41.50

Injector Nozzle - For tractor models 231, 233, 2810, 2310, 2600. (Part No: D4NN9E527E)
$57.48

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Part No: CAV9094-713)
$35.18

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM part number CAV7135-110. (Part No: CAV7135-110)
$24.26

Manifold Heater - This Thermostart Intake Manifold Heater is used on multiple Ford Diesel Tractors. It replaces original part numbers C5NE9A436A, E1NN9A436AA and 81806046. For Diesel Tractor Models 2000, 2110 LCG, 230A, 231, 233, 234, 2600, 2610, 3000, 333, 334, 335, 340, 3400, 340A, 3500, 3550, 3600, 3610, 3900, 4000, 4100, 4110, 4110LCG, 420, 4400, 445, 4500, 4600, 4610, 5000, 515, 530A, 531, 532, 535, 540, 540A, 545, 550, 5500, 555, 5550, 5600, 5610, 5900, 655, 6600, 6610, 6700, 6710, 7000 and 7600. (Part No: 3583543M2)
$14.26

Pre-cleaner Assembly - For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 3910H, 4000, 4110, 4600, 4610, 4610H, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 5900, 6600, 6700, 6810. Pre-cleaner Assembly. 6.89 inch bowl diameter, 2.362 inch inlet diameter, 3.937 inch body height. (Part No: 81823388)
$40.05

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Part No: B9NN9A660A)
$29.76

Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Part No: C5NN9740A)
$6.80

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Part No: 353873S)
$1.46

Gauges
Fuel Sender - Fuel Sender with gasket, screw held. Used on some Ford Tractors, 1965 and later. Verify part number. Replaces E3NN9A316CA and 83943961. (Part No: 83943961)
$61.00

Fuel Sending Unit - Lock Ring type for models: (2000, 2600, 3000, 3600, 4000, 4100, 4600, 2610, 3610, 2910, 4110, 4610 all 1965 - 11/1983). Fits Fuel Tank part number E2NN9002BA and C5NN9002AC. Lock Ring and seal are not included, part number C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal ORDER SEPARATELY. Replaces C5NN9A316B, D5NN9A316D, D6NN9A316A, D8NN9A316EA, D8NN9A316EB, D8NN9A316FA, D8NN9A316FB, D8NN9A316KA, 81805896, 83904240, 83909430, 83914077, 83914078, 83917492, 83917698 (Part No: D8NN9A316KA)
$35.26

Fuel Sending Unit Lock Ring Seal - This Fuel Sending Unit Lock Ring Seal is used with C5NN9N283A Lock Ring and on tanks E2NN9002BA, C5NN9002AC and D8NN9002HA. Replaces original part number E2NN9276AA (Part No: E2NN9276AA)
$1.42

Instrument Cluster - Speedometer moves counter clockwise. Metal Casting. For tractor models 2600, 3600, 4100, 4600, 5600, 6600, 7600 (1975 to 1981) also fits 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, (1981 to 1990), 5610, 5900, 6610, 7610, (1981 to 9-1985), 230A, 234, 334, 335, 530A (1981 to 2-1990). Includes Instrument Stabilizer C7NN10N507A (not used in all applications). Replaces C7NN10849C, E5NN10849BA, D8NN10849TA, D8NN10849TB, D5NN10849A, 83904448, 83927301, 83958741, 83953544, E7NN10849BA (Part No: E5NN10849BA)
$84.00

Instrument Cluster Seal - Instrument Cluster Gauge Gasket for 2000, 2600, 3000, 3600, 3400, 3500, 4400, 4600, 4000, 4610, 5600, 6600, 7600. Note, this seal does not have inset fasteners. That version of the seal is not available. (Part No: C5NN10A949C)
$16.26

Lens, Instrument Cluster, Plastic - Fits 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 450, 455, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5610S, 5900, 655, 655A, 6600, 6610, 6610S, 7600, 7610, 7610S, 7810, 8010. (Part No: 83918700)
$33.76

Proofmeter Cable - 49 inch long, ends are 13/16 inch inside diameter and 5/8 inch inside diameter. For tractor models Major, Super Major diesels less exhauster from 4/1962 and up, Major, Super Major, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3300, 3310, 3550, 420, 445, 515, 535, 545, 5500. Note type of ends in picture. Replaces C7NN17365B, D3NN17365A, D3NN17365C, E1ADDN17365C, E1NN17365BA, E9NN17365AA, VPM5212, 1500491C1, 1970910C1, 81807558, 81817090, 81837768, 81837769, 82847520, 83931709, 83933021, 83935157, 83983613. (Part No: E1ADDN17365C)
$16.55

Sending Unit Lock Ring - For various fuel tanks such as E2NN9002BA, C5NN9002AC and D8NN9002HA which use a lock ring to secure the fuel sender (like the D8NN9A316KA). Fits many Ford Models, 1965 and later. Order Seal E2NN9276AA separately if needed. Replaces C5NN9N283A, 81811218. (Part No: C5NN9N283A)
$4.50

Shaft and Cable Assembly - Shaft and Cable Assembly, Adapter to Tachometer Cable, 4-1/4 inches long. For 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 5600, 5610, 5700, 5910, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710. Replaces OEM numbers D3NN17N275A, E9NN17N275AB, F1NN17N275AA, 81834274, 83987694, 87760307. (Part No: F1NN17N275AA)
$4.40

Tachometer Adapter - This Tachometer Adapter fits the following tractor models: 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 450, 455, 455C, 455D, 4600, 4610, 4630, 4830, 5030, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5600, 5610, 5900, 650, 655, 655A, 6600, 6610, 6700, 6710, 750, 755, 755A, 755B, 7600, 7610, 7700, and 7710. Replaces: 87800006, D3NN17N264B, D8NN17N264AA, E3NN17N264AA, E4NN17N264AA, E9NN17N264AA, F1NN17N264AA, F1NN17N264AB and 81873710. (Part No: 87800006)
$43.00

Tachometer Cable - This Tachometer Cable measures 48 inches long and fits the following tractor models without a cab: 2000 (3 cylinder), 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000 (3 cylinder), 4100, 4110, 4400, 4500, 4600SU (from 1975-1981), 4610 (from 1981 and up), 5000, 5100, 5600, 5610, 6600, 6610, 7000, 7600, and 7610. Replaces: 506332M91, D9NN17365AA, D9NN17365AB, G45230, 150938R91, 363811R92, TO19144, 363811R92, 82847520, and D3NN17365F. (Part No: D3NN17365C)
$10.70

Temperature Sender - Temperature Sender, Water. The part may come with a spade terminal which might require changing your wire end. 3/8 Inch NPT Thread.Replaces: 81818428, 83904449, 83904448, 81837742, 83911735, 83948391, 8712608, 82028131, 9712608, D8NN10884AA, E1NN10884AA, 2080406, 3917490, 73403367 (Part No: D5NN10884A)
$10.32

Temperature Sender, Water - This sending unit is a 1/8 NPT thread. If you r tractor has a 3/8 NPT thread for this to go into, you need to purchase an adapter at your local hardware store. Fits 2000, 2600, 3000, 4000, 5000, 7000, (1965-1975). Replaces C4AH10884A, 81784007, 81784077 (Part No: C4AH10884A)
$7.76

Hitch / Drawbar
Coupler - Quick coupler, female half. For 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: 4250-4)
$19.00

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. (Part No: C5NN594E)
$10.88

Drawbar - Swinging Drawbar, 32-7/8 inch overall length with 1-1/2 inch offset. For 2000, 230A, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5030, 530A, 5600, 6600, 7600, 7700. (Part No: C5NN805C)
$132.00

Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: 957E5967)
$14.26

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Part No: EC0N660A)
$4.66

Leveling Arm - Right Hand Leveling Arm Assembly for 2000, 2600, 2610, 3000, 3100, 3600, 3610, 2100, 4110. Adjustable length "A" is approximately 21 to 25 inches. Top hole measures .618 inch, bottom uses a 5/8 inch pin. (Part No: E0NN569AA)
$49.00

Leveling Arm - Left Hand Leveling Arm Assembly has a .66 fork hole diameter and 1.925 inches between holes. Adjusts from 21 1/2 inches to 24 1/2 inches. For 2000, 2600, 2610, 3000, 3100, 3600, 3610, 2100, 4110. 2N564B (Part No: 6N564B)
$54.00

Leveling Box Yoke Rod, LH - Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4110. (Part No: C5NNB863A)
$22.00

Leveling Rod Assembly, Left Hand - Left Hand Leveling Arm Assembly. Fits models: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 4000. Includes: C5NNB863A rod, NCA585B fork, and 957E566 knuckle. Adjusts from 21 1/2 inches to 24 1/2 inches. Replaces NCA564B, C5NN564D. (Part No: 6N564B)
$54.00

Leveling Rod, Left Hand - Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 9N564B, C5NN564B. (Part No: 182544M92)
$34.50

Lower Lift Arm, LH - Left hand Category I lift arm has 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, (1955-1964); 2000, 2600, 3000, 3600 (1965-1981), 4000. Replaces D0NN555C (Part No: D0NN555CLH)
$82.22

Lower Lift Arm, RH - This category I lift arm is Right hand. 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820, 840, 850 (1955-64); 2000, 2600, 3000, 3600 (1965-81). Replaces D0NN555D (Part No: D0NN555DRH)
$49.26

Lower Link Support Pin, 7 Inches - This lower link support pin is for tractors with differential lock for models 2000, 3000, 2600, 3600, 2610, 3610. Replaces C5NNN563A, 81801639 (Part No: C5NNN563A)
$29.00

Rod Leveling - Leveling Rod Assembly, left hand, adjustment from 27-1/2 inches to 32 inches. For 230A, 2310, 231, 233, 2600, 2610, 3000, 333, 334, 335, 3600, 3610, 4000, 4600SU, 4610, 530A. (Part No: E0NNB484DA)
$56.57

Stabilizer Bar Left Hand - Link, stabilizer, left hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU. Dual Category - II & III, center to center on holes 31.500 & 32 inches, Holes diameters .875 & 1.125 inch, Overall Length Approx 33.5 inches, Thickness Approx .375 inch, and a Width of 2 inches. (Part No: C5NNN455B)
$28.76

Stabilizer Bar Left Hand - Link, Stabilizer, left hand. For 2000, 2600, 3000, 3600, 4110. 31.5 inches center to center on holes, holes .875 inches, .375 inches thick, 2.00 inches wide. (Part No: C5NNN455C)
$29.26

Stabilizer Bar Right Hand - Link, Stabilizer, Right Hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU. Dual Category - II and III, center to center on holes 31.500 & 32 inches, Holes diameters .875 & 1.125 inch, Overall Length Approx 33.5 inches, Thickness Approx .375 inch, and a Width of 2 inches. (Part No: C5NN454B)
$28.76

Stabilizer Bar Right Hand - Link, Stabilizer, right hand. For 2000, 2600, 3000, 3600, 4110. 31.5 inches center to center on holes, holes .875 inches, .375 inches thick, 2.00 inches wide. (Part No: C5NN454C)
$28.76

Stabilizer Bracket - Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Part No: 231254)
$12.50

Swinging Drawbar Kit - Fits tractors: 2000, 2310, 2600, 2610, 3000, 3600, 3610. INDUSTRIALS: 230A, 231, 233, 2110LCG, 333, 335, 3400, 3500, 420, 530A, 531, 535 (Note, industrials may require C5NNN806B available through a dealer only. (Part No: CFPN820A_)
$265.00

Top Link Rocker - Fits 2000 3-cyl 1/1965 & newer, 2600 1/1975 & newer. "A" in picture is a ROUND HOLE (used with one way draft control). (Part No: C7NN535B)
$55.26

, 2600 1/1975>, 2610 1/1981-4/1983, 3000 1/1965>, 3600 1/1975>, 3600N 1/1975>, 3610 1/1981-12/1982, 3610N 1/1981-12/1982." />
Top Link Rocker - Note: "A" in picture is an OVAL hole (used with two-way draft control). Fits 2000 3 cylinder 1/1965>, 2600 1/1975>, 2610 1/1981-4/1983, 3000 1/1965>, 3600 1/1975>, 3600N 1/1975>, 3610 1/1981-12/1982, 3610N 1/1981-12/1982. (Part No: E0NN535AA)
$76.00

Top Link Rocker - This Top Link Rocker is used on 2000, 231, 233, 2600, 333, 335, 3400, 3500, 4110LCG, 531. Replaces C7NN535B, C7NN535C, E0NN535AA, 83923994 (Part No: C7NN535C)
$54.00

Hydraulic System
Back Pressure Valve - This valve was used on FORD 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 2610, 2910, 3610, 2910, 4610, 5610, 6610, 7610, 7710. (Part No: C9NN960A)
$44.06

Body Half Female - Coupler For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: 8250-4)
$43.26

Breakaway Clamp, Double - Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 5006-4)
$27.00

Bushing Kit - Cross Shaft bushing kit. Contains 1 bushing, 1 O-Ring, and 1 washer. For tractor models 2000, 3000, 2600, 3600, 2310, 2610, 2910, 3610, 3910, IND 230A, 231, 233, 234, 2110LLG, 333, 334, 335, 340A, 3400, 3500, 4110LLG, 530A, 531. Replaces DBPN531A and 81825128 (Part No: DBPN531A)
$34.50

Clamp - Double Break-Away Clamp. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 5900, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 9006-4)
$34.05

Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 and Safeway type S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this clamp. Used on tractors with Single Pump Hydraulic System, 1955 thru 1981 models. For tractor models 500, 600, 700, 800, 900, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: S42-4)
$29.45

Cylinder, Side Link - Side Link Hydraulic Cylinder. (Part No: HSL3201)
$209.52

Cylinder, Top Link - Top Link Hydraulic Cylinder. (Part No: HTL3101)
$275.00

Double Spool Remote Valve Kit - This Double Spool Double Acting Hydraulic Remote Valve Kit includes valve, levers, o-rings and hoses. Depending on application, hoses may need an extra fitting to lengthen. Hose bracket and female couplers. Non detent, spring centering. Mounts on the lift cover (under the seat). Some seat brackets may have to be modified for clearance. Use with 8010-4 male plugs for the couplers (not included). Will not fit compact tractors. Will NOT fit NAA, Jubilee, Golden Jubilee (bolt pattern is different). 3/8 inch BSP threaded hoses. Replaces 309973, 309973F, 309996, 80309973, 83928704, 83944762, C9NNB950B, E1NNB950BA, E1NNB950BB (Part No: E1NNB950BB)
$712.41

Draft Control Handle - This Draft Control Handle is used on many ford tractor and industrial models. It replaces original part numbers D3NNB505B, ESL11003, 81843895. (Part No: D3NNB505B)
$32.88

Draft Control Plunger - This Draft Control Plunger is for models 2000, 2110LCG, 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 420, 4400, 445, 445A, 445C, 445D, 450, 4500, 4600, 4610, 4630, 4830, 5030, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D. (Part No: C5NN541A)
$28.76

Hose Bracket - Hydraulic Hose Coupler Bracket. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5900, 500, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: D6NND916D)
$42.57

Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mounting instructions. 3/8 inch NPT ports. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Part No: HV4902)
$52.00

Hydraulic Cover Blocking Plate - Fits 2000, 3000, 3930, 4000, 4100, 4110, 4130, 2600, 3600, 3900, 4600, 4610, 4630, 4830, 5030 INDUSTRIALS: 230A, 231, 233, 234, 333, 334, 335, 530A, 540, 540A, 540B, 545, 545A, 545B, 545C, 545D. (Part No: C5NN475B)
$37.50

Hydraulic Filter - This Spin-on type hydraulic filter measures 3.79 inches outside diameter, 6.42 inches long and 1.125 inches inside diameter hole. VERIFY DIMENSIONS. For tractor models: 4100, 2310 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 2600 with GEAR TYPE PUMPS, 2610 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 3600 with GEAR TYPE PUMPS, 3610 with TANDEM MOUNTED PUMPS 1981 THRU 1983, 3910, 4110, 4600, 4610, 5600, 5610 with VERTICAL EXHAUST, 6600, 6610 with VERTICAL EXHAUST, 6700, 6710 with VERTICAL EXHAUST, 7600, 7610 with VERTICAL EXHAUST, 7700, 7710 with VERTICAL EXHAUST. Replaces 83918631, 81836728, 83901265, 47622189, 83912256, 83903433, D3NNB486B, D4NNB486D, F0NNB486AA, D6NNB486A, D3NNB486A, D8NNB486CA, D8NNB486AA, D4NNB486A, 84263773, 81863229, 81844732, 83984236 (Part No: D6NNB486A)
$11.30

Hydraulic Filter, Steel Mesh - Steel Mesh Hydraulic Filter replaces OEM number 81802002. Used on 2000, 3000, 4000, 2600, 3600, 3900, 4600, 5600, 6600, 6700, 7600, 7700, 231, 335, 420, 515, 531, 532, 535. Measures 2 3/4 inch tall, 2 1/8 inch Diameter with a 3/4 inch center 3 prong hole. Does not include rubber seals and we do not have them available. (Part No: C5NNN832B)
$10.76

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Part No: C5NNN901A)
$6.86

Hydraulic Lift Arm, Left Hand - This is the Left Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802158, C5NNB921D (Part No: C5NNB921D)
$55.00

Hydraulic Lift Arm, Right Hand - This is the Right Hand Hydraulic Lift Arm used on Ford 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 333, 334, 335, 3400, 3500, 3600, 3610, 3910, 4110, 530A, 531. Replaces 81802150, C5NNB920D (Part No: C5NNB920D)
$63.00

Hydraulic Lift Cylinder Piston Washer - This Backing Washer is used with C5NN530B 3 inch piston. Fits Models: 2N, 8N, 9N, 230A, 231, 233, 234, 333, 334, 340, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2310, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, Dexta, Super Dexta. It replaces original part numbers NCA473A and 81801439. (Part No: NCA473A)
$1.60

Hydraulic Lift Shaft - For tractor models (2000, 4000 from 1965 and up), (2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, (340A prior to 5/1983), 3500, 3600, 3910, 4110, 530A, 531. (Part No: C5NN544D)
$150.00

Hydraulic Pump - This is a Gear Type Pump. It will mount to the engine in the same location as a Piston Style Pump, but the hydraulic lines will have to be changed. For tractor models: 231, 233, 333, 531, 2600, 3600 1975-1981, 234, 2310, 2610, 3610 1981-3/1983, 5610, 6610, 6710, 7610, 7710 1981-9/1985, 7210, 8210 1982-10/1991, TW5, TW15, TW25, TW35, all with Engine Mounted Pump. (3500, 3350, 4400, 4500, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4200, 4330, 4340, all 1965 to 9/1969 w/ Ind PTO). Uses E4NN911AA gasket, not included. Used with filter D6NNB486A with vertical exhaust or D8NNB486EA with horizontal exhaust. Hydraulic Pump also replaces 83996272, 83996336, E1NN600AA, E1NN600AB, C5NN600AA, D3NN600A, D3NN600H, D4NN600B, ESL11276, E1NN600AA-E, E1NN600AB, VPK1014, 81836735, 81844738, 83900640, 83928509, 83996272. (Part No: E1NN600AB)
$340.00

Hydraulic Pump Gasket - This gasket is used to mount Engine Mounted Hydraulic Pumps on many Ford Tractors, including E1NN600AB Pump. Replaces original part numbers 83948101, E4NN911AA. (Part No: E4NN911AA)
$2.00

Hydraulic Pump Piston - Hydraulic pump piston with and diameter of 9/16. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models. Replaces 81801695 and C0NN882B. For models: 2000 3 cylinder, 2150, 2300, 2600, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 4000 3 cylinder, 4000SU, 4100, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU. (Part No: C5NN615A)
$15.35

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5/8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901 , 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Part No: NCA615C)
$15.35

Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Part No: C0NN852A)
$34.00

Hydraulic Pump Repair Kit - Major repair kit for engine mounted pumps: C5NN600AA, C7NN600Y, C5KNN600AB, C7NN600Z all 1965 and up. D477600C and D6NN600A both 1975 and up. (Part No: CKPN600A)
$23.00

Hydraulic Pump Shaft - Wobble Shaft. For tractor models 2000, 3000, 4000, 2600, 3600, 4600 With Piston Type Pump, 1965 AND ABOVE WITH 6 Inch THREADED SHAFT. (Part No: C5NN966A)
$80.00

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Part No: CODW4621A)
$9.50

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft C5NN9666A. For tractor models (2000, 3000, 4000 all 1965 and up), (2600, 3600, 4600 all 1975 and up). (Part No: CODW4616A)
$4.50

Hydraulic Quick Release Coupling, Male - Male Tip-Check Valve Assembly, Implement Half. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30. (Part No: D5NNB964A)
$9.32

Hydraulic Valve Kit - Valve, Hydraulic, with handle, Single-Spool Multi-Valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 degree rotated handle. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4012)
$229.55

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4021)
$525.32

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4020)
$488.08

Hydraulic Valve Kit, Remote - Has double spool control to activate two double-acting remote hydraulic rams. Kit includes: B8210 diverter valve, control valve, pioneer breakaway kit, hoses and fittings. For DIESEL models: 2000, 3000, 4000, 2600, 3600, 3900, 2610, 3610, 3910, 4110, 4610. (Part No: B91468)
$986.70

Hydraulic Valve O-Ring Kit - Hydraulic Valve Mounting O-Ring Kit. For 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600. (Part No: DHPN485A)
$4.40

Hyrdaulic Plug - Hydraulic Plug measures 1 5/8 x 12 thread. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4100, 4110, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 450, 4500, 4600, 4610, 5000, 5100, 5110, 515, 5190, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 5600, 5610, 5900, 6410, 655, 655A, 6600, 6610, 6810, 7010, 7100, 7200, 745, 7600, 7610, 8000, 8010, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700, DEXTA, FMD, SUPER DEXTA, TB100, TB110, TB120, TB80, TB85, TB90, TW10, TW20, TW30. Replaces 83911792, D6NN7222A, 81804565, 83911793, D6NN7222B. VERIFY DIMENSIONS OR OEM BEFORE ORDERING. (Part No: 957E7010)
$13.76

Lift Cover Gasket - Used of Ford Tractors 1965 and later, this gasket replaces OEM part numbers 957E502, E7NN502AA, C5NN502A, 83963584 (Part No: C5NN502A)
$2.76

Lift Cylinder Safety Valve - For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3500, 3600, 3600V, 3610, 3900, 3910, 4000, (4110, 4120, 420, 445, 445A, 450, 4600, 4600SU, 4610, 515, 545A, 600, 6000, 601 1962-1964, ) 650, 660, 701, 800, 801, Dexta, Super Dexta. Also replaces 957E9842 and C5NN984A. (Part No: 957E984B)
$24.27

Lift Cylinder Safety Valve - This Lift Cylinder Safety Valve has 3/4 x 16UNF Right Hand Threads. It is used on Ford / New Holland 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 3230, 333, 334, 335, 340, 340A, 340B, 3430, 345C, 345D, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 420, 445, 445A, 445C, 445D, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6610S, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7610S, 7630, 7700, 7710, 7740, 7810, 7810S, 7840, 7910, 8010, 8210, 8240, 8340, 8530, 8630, 8730, 8830, TS100, TS90, TW15, TW25, TW35, TW5. Replaces 81838679, D3NN984C, D5NN984A, 83911832 (Part No: D5NN984A)
$37.50

Pivot Pin Nut, Pack of 10 - Pack of 10 This Nut is used with D2NNH889A Pivot Pin. Replaces C9NNH891A, 86632551 (Part No: C9NNH891A)
$3.60

Remote Control Kit - Single Spool, Single/Double Acting with Hoses - Female Couplers. This valve is spring loaded to neutral.For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Part No: S.68981)
$285.00

Rod Pivot - Pivot for Hydraulic Control Valve Handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: C9NND912A)
$33.29

Selector Valve - The Selector Valve is used on multiple Ford Tractors. Fits Models: 230, 231, 233, 234, 250, 260, 333, 334, 335, 340, 345, 420, 445, 450, 515, 530, 531, 532, 535, 540, 545, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2110, 2600, 2610, 2810, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4500, 4600, 4610, 4630, 4830, 5030. Replaces original part numbers: C5NND960C, E0NND960AA, 83906348, 83924886. (Part No: E0NND960AA)
$216.00

Valve - Valve, Single-Spool, (Non-Detent/Spring Centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 6600, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950AB)
$353.10

Valve - Valve, Double-Spool, Pressure Detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E2NNB950CA)
$930.29

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Part No: HV5902)
$109.72

Valve Handle - Handle with blue vinyl coated grip, for 1 and 2 Spool Valves. Overall length 11 1/4 inches. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: D3NNB936A)
$15.71

Valve Kit, 1 Spool - Kit Assembly, includes 1-Spool Valve (Non-Detent/Spring Centering), Handle and Valve Mounting Kit. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950AB-KIT)
$526.82

Valve Kit, 1 Spool - These kits include Single Spool Valve (Non-Detent/Spring Centering), Hoses, Hose Couplers, Coupler Bracket, Self Closing Dust Covers and Handle Mounting Kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For tractor models 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Part No: DGPNB950S1-KIT)
$744.52

Valve Kit, 2 Spool - Kit Assembly, includes 2-Spool Valve (Non-Detent/Spring Centering), Handle and Valve Mounting Kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: E1NNB950BB-KIT)
$810.00

Valve Less Handle - Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Part No: HV4033)
$504.70

Valve Mount Kit - Handle and Valve Mounting Kit, Single-Spool. For tractor models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 6600, 500, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 309972F)
$41.61

Implements
Valve Lever Pivot Pin - This Valve Lever Pivot Pin is for factory remote valves. It is used with: C9NNH891A Nut, D3NNB936A Lever and C9NND912A Pivot. Replaces D2NNH889A, 81834237 (Part No: D2NNH889A)
$2.68

Lights
Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Part No: FAA13102A)
$4.40

Headlight Ring - Rubber ring is 4 3/4 inches outside diameter and approximately 1 inch wide. Verify OEM part number. For Fords with original Ford fender or cab mounted lights, 1968 & up. Replaces 1027218M1, 83936004, D5NN13N056A, D6NN13N056A (Part No: 1027218M1)
$8.16

Headlight Switch - Headlight Switch and Nut is used on Ford 2000, 3000, 4000, 5000, 7000, all 1965 to 1975. For 2600, 3600, 4600, 5600, 7600, all 1975 to 1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981 to 8/1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981 to 8/1985, 7910, 8210, both 1983 to 8/1985. This is an NON-FUSED replacement. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. (Part No: C5NN11654A)
$9.74

Headlight Switch - Headlight Switch and Nut is used on Ford 2000, 3000, 4000, 5000, 7000, all 1965 to 1975. For 2600, 3600, 4600, 5600, 7600, all 1975 to 1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981 to 8/1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981 to 8/1985, 7910, 8210, both 1983 to 8/1985. Can use D4NN11666RPL knob, not included. This is a fused switch. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. (Part No: 251405)
$16.76

Headlight Washer - Used with light part number 164089AS. Replaces 82858740, 83917547, C5NN13N020B, D8NN13N020AA. For the following tractors: 515, 530, 531, 532, 535, 540, 545, 550, 555, 655, 750, 755, 665, 775, 2600, 2610, 2810, 2910, 6600, 8000, 9000, 3600, 3610, 3910, 4600, 4610, 5600, 5610, 6610, 7600, 7610 (Part No: 504781M1)
$4.46

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$43.76

Light Switch Knob - This Light Switch Knob can be used with 251405 light switch or original equipment. Replaces part numbers D4NN11666A, D4NN11666RPLGV, D4NN11666RPL. (Part No: D4NN11666RPL)
$13.25

Light Switch, Rotary Type - This Rotary Type Light Switch is used on many Ford/New Holland models 1965 and later. It replaces original part numbers C5NN11654A, C5NN11654D, C7NN11654B, C7NN11654C, D5NN11654B, E7NN11654AA, 83959708, D10026500, 83959708, 81818781, 81818408, 83905863. (Part No: E7NN11654AA)
$14.26

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Part No: S.61357)
$18.00

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Part No: D6NN13N007A)
$24.74

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Part No: 70230252)
$13.26

Tail Light - This is a Duolamp Tail Light and Bracket Assembly used on Ford Tractors 1958 and later. Fits models: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801. Replaces: 310064, 86633401, 86639447, C5NN13403A, D2NN13403A. (Part No: 310064)
$77.00

Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: TLBULB12V)
$2.20

Miscellaneous
Valve Mount Kit - Handle & valve mounting kit, single-spool. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: 309973F)
$78.41

Oil System
Driveshaft - Intermediate Shaft, Oil Pump Drive. For tractor models 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Part No: C7NN6A605A)
$12.50

Oil Dipstick - This Dipstick is 7 7/8 inches long. It is used on many Ford agriculture and industrial models, 1975 and later. Replaces: 87801534, C7NN6750C, C9NN6750A, D3NN6750C, D3NN6750D, D3NN6750E, D4NN6750B, D4NN6750D, D6NN6750B, E9NN6750BA, 81816867, 81822073, 81837146, 81837147, 81843818, 83902286, 83905287, 83918846, 83982499 (Part No: E9NN6750BA)
$7.56

Oil Filler Cap - Fits ALL 3, 4, and 6 cylinder models that are 1975 and NEWER, Including: 2600, 2310, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3910, 3930, 4100, 4110, 4600, 4610, 4630, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces: 81823214, 83907851, 87763303, 87867228, C7NN6N609B, C9NN6N609A, D5NN6N609A (Part No: 83907851)
$7.10

Oil Filter - Engine Oil Filter, Cartridge Element, 2 quart. Measures 4 1/2 inches outside diameter, 11/16 inches hole diameter and 4 7/8 inches in length. For 3, 4 and 6 Cylinder Engines (1965 to 1979) on models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20. (Part No: DGPN6731A)
$12.61

Oil Pan - Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 281, 2910, 3610, 3910, 4110, 4610, 3230, 3430, 3930, 4130, 4630. Industrial 230, 231, 233, 234, 2110LCG, 333, 334, 335, 3400, 3500, 3550, 420, 4110LCG, 445, 445A, 4400, 4500, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Cast iron construction. Does not include gasket and plug. (Part No: C9NN6675A)
$355.00

Oil Pan Drain Plug - This 3/4 inch Oil Pan Drain Plug is for Ford tractor models: 230A, 231, 233, 234, 333, 334, 335, 420, 445, 445A, 450, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 555C, 555D, 575D, 655, 655A, 655C, 655D, 755, 755A, 755B, 2000, 2600, 2910, 3000, 3230, 3400, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4110LCG, 4130, 4400, 4500, 4610, 4630, 4830, 5000, 5030, 5500, 5550, 5600, 5610, 5900, 6500, 6600, 6610, 6700, 6710, 7000, 7500, 7600, 7610, 7700, 7710, 7810, 7810S, 7840, 7910, 8000, 8010, 8160, 8210, 8240, 8260, 8340, 8360, 8530, 8560, 8600, 8630, 8670, 8700, 8730, 8770, 8830, 8970, 9000 1970 and up. Uses C9NN6734A washer, not included. Replaces C9NN6730B. (Part No: C9NN6730B)
$2.20

Oil Pan Kit - 3 Cylinder Engines - SAME PAN AS C9NN6675A BUT NOT CAST IRON. THIS IS OF TIN CONSTRUCTION. Fits 3 cylinder tractors 1965 and newer: 2000, 3000, 2600, 3600, 4000, 4600. Kit includes: sheet metal pan with drain plug. NOTE, This part does not come with the shown gasket. Gasket must be ordered separately as part number F0NN6710AA. Replaces 81822143, 81874150, C9NN6675A, and F0NN6675BB. (Part No: S.66514)
$83.00

Oil Pressure Switch - This oil pressure switch is made with 2 types of connectors and you may receive a typical space connector or a round connector. Whichever wire connector you have on your tractor will fit either switch. The are interchangeable. For tractor models 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD)
$7.66

Oil Pump with screen - Complete Oil Pump Assembly with Lower Screen. For models: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA, E1NN6600DC, E1NN6600DB. (Part No: E1NN6600DD)
$54.00

Pump Gear/Shaft Assembly - Gear and Shaft Assembly, Oil Pump Drive. For models: 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700, NAA. (Part No: E9NN6A820AA)
$34.50

PTO / Driveline
Arm, PTO Shifter - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Part No: C7NNN740A)
$75.51

Coupling, PTO Clutch - For 6 and 8 speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Part No: C5NN717A)
$71.00

Fork, PTO Shifter - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmission or live PTO). (Part No: C5NN720A)
$16.76

Input Shaft Seal - Used with Transmission driven PTOs. It is used am many Ford / New Holland Tractors. Measures I.D. 1.0675 inch, O.D. 2.1940 inch, W. 0.5000 inch. (Metric 28.5 x 55.5 x 12.4mm). Replaces E81GD9, D9NN7R510BA, 83924524, 83924924 (Part No: D9NN7R510BA)
$3.10

Live PTO Shifter Plate - For 6 and 8 Speed transmission, manual reverse on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A. (Part No: C7NN721A)
$17.50

PTO CAP - Fits most Ford Tractors 1939 and later. Replaces part numbers 81809440, 310088, 80310088, 310088F, 0310088F (Part No: 310088)
$6.08

PTO Countershaft - 6/23 spline, 12.0625 inches long. For tractor models (2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 3000, 3100, 3110, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4000, 4110, 4330, 4340 all with Transmission PTO). (Part No: C5NN702A)
$167.00

PTO Countershaft - 11/6 spline, 24.250 inches long. For tractor models (2000, 3000, 4000 all with live PTO and 6 or 8 speed transmission). (Part No: C7NN702B)
$189.00

PTO Housing Gasket - This PTO Housing Gasket is used on many Ford tractor models: Dexta, Super Dexta, NAA, 2N, 8N, 9N, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445A, 515, 530A, 531, 540A, 540B, 545A, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110LCG, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 4000, 4400, 4500. Replaces: 81801907, 957E4129, 9N4129, C5NN747A. (Part No: C5NN747A)
$0.36

PTO Input Shaft - This PTO Input Shaft measures 10.7 inches long, has 17 helical teeth and 29 splines. For tractor models (2000, 2100, 2110, 2120, 2300, 3000, 3055, 3100, 3110, 3120, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500 all 1965 and up with live PTO), (231, 233, 2600, 333, 3600, 531 all 1975 and up with live PTO)< (234, 2610, 334, 530A all 1981 and up with live PTO). (Part No: C5NN772A)
$191.00

PTO Output Cover Gasket - Used on many Ford / New Holland Tractors built 1965 and later. Replaces OEM part numbers C5NN7086A, 81815558 (Part No: C5NN7086A)
$0.99

PTO Seal - This PTO Input Shaft Oil Seal is for models with live or independent PTO. Seal Measures .984 inches inside diameter, 1.496 inches outside diameter and .236 inches in width. For models Dexta, Super Dexta, (2000, 3000 and 4000 all with 6, 7 and 8 speed transmissions), (2610, 3610, 4100, 4110, 4600, 4610 all with 8 speed transmission). Replaces part numbers A-VPH1413 and 81717245. (Part No: 957E727A)
$4.20

PTO Shaft - Shaft, PTO rear. Length 29-1/2 inches, 6 and 10 spline. For 2000, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3910, 531. Replaces 83955575, C5NNA728A, E5NNA728AA (Part No: C5NNA728A)
$67.42

PTO Shaft Seal, Double Lip - Outside diameter 2.45 inches, inside diameter 1-5/8 inches, 5/8 inches wide. For tractors with 1-1/8 inch to 1-3/8 inch PTO including 4, 6, 7 and 8 speed transmissions. Models: 8N, 9N, 2N, NAA, Jubilee, 600 (Series), 800 (Series), 2000, 3000, 3550, 4000, (1965-1975), 2600, 3600, 4100, 4600, (1975-1981), 2610, 3610, 3910, 4110, 4610, (1981-up). Replaces 9N703B, D8NN703AA, D9NN703BA. (Part No: D9NN703BB)
$3.56

PTO Shift Lever - For 6 and 8 Speed transmission on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmision or live PTO). (Part No: C5NN723A)
$40.00

Shaft Housing, PTO - For 1 3/8 inch diameter PTO shaft. Fits 2000, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910 (1965-4/1983). (Part No: E2NN733AA)
$54.00

Sleeve, PTO Intermediate Shaft - Has 6 and 26 splines. For 6 and 8 Speed transmissions on models: 2000, 2310, 2600, 2610, 2810, 3000, 3600, 3910. Fits INDUSTRIALS: 231LCG, 234, 333, 334, 340, 340A, 340B, 3500, 420, 445, 515, 531LCG, 532, 535, 540, 540A, 540B, 545, 545A (with Transmision or live PTO). (Part No: C5NNN705A)
$46.26

Seats
Seat Bottom - Blue Vinyl on steel For 2120, 2300, 2310, 2600, 2610, 2910, 3055, 3100, 3120, 3150, 3310, 3330, 3400, 3500, 3550, 3600, 3610, 3900, 3910, Late 4000, 4100, 4110, 4200 (Part No: R0861)
$107.38

Seat Cushion, Black - This Black Pan and Cushion Assembly for deluxe suspension seat fits tractor moddels: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces D1NNA405B, D2NNA405B, D2NNA405BAK, E2NNA405AA99B. (Part No: E2NNA405AA99M)
$80.00

Seat Cushion, Blue - This Blue Pan and Cushion Assembly for deluxe suspension seat fits tractor moddels: 2000, 3000, 4000, 5000, 7000 (1965-2/1969 and 2/1970-1975), 2600, 3600, 3900, 4100, 4600, 5600, 6600, 231, 233, 333, 335, 515, 531, 532 (1975-1981), 2610, 2910, 3610, 3910, 4110, 4610, 231, 234, 334, 335 (1981-2/1990), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987), 5610, 5900, 6610 (1981-10/1985). For hinged seat on 1000, 1600 (1973-1978), 1100, 1200, 1300, 1500, 1700, 1900 (1979-10/1983), 1110, 1210, 1310, 1510, 1710, 1910, 2110 (1983-1987). Replaces C7NNA405R, D0NNA405C, D1NNA405A, D1NNA405B, D2NNA405B, D2NNA405BAK, D8NN400BABB, E2NNA405AA99B, E2NNA405AA99M, E7NN400GA, E7NN420AA. (Part No: E2NNA405AA99MBL)
$83.00

Suspension Seat - New Ford/New Holland replacement seat. Complete seat with suspension, blue. Fits Ford / New Holland Compact tractor models: 1110, 1210, 1310, 1510, 1710, 1910; Fits Industrial/Construction models: 340A, 340B, 345D, 3500, 445, 445A, 445C, 445D, 450, 515, 540A, 540B, 545A, 545C, 545D; Tractor models: 2100, 2110, 2120, 2150, 2300, 231, 2310, 234, 2600, 2810, 2910, 3000, 3055, 3100 3300, 3310, 3330, 3600, 3610, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4400, 4410, 4600, 4610, 5000, 5100, 5200, 531, 532, 5600, 5900, 6600, 6700, 7000, 7100, 7200. There is a plate on the bottom that is 4 inches wide and 8 1/4 inches long. In the center of this plate are 2 slots that are 3/8 inches wide, 1/4 inch from each edge and 1/2 inch apart and they are about 4 inches long. Overall width is 19.5 inches, overall length of base is 15.25 inches, overall height of base is 9.25 inches. (Part No: CSA698-8V)
$200.00

Sheet Metal / Body Parts
Bumper - High quality bumper complete with mounting brackets. Mounts to axle. For 2000, 231, 233, 2600, 3000, 333, 3600, 4100, 531. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Additional $125.00 shipping due to weight. This additional charge will be added to your order. (Part No: D8NN17750AA)
$260.00

Bumper - This is a new aftermarket style Bumper. It has a trailer hitch. Comes primer coated. Used on NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (1962-1964), 3000, 4000SU, 2600, 3600, 4100, 4600SU, 2610, 3610, 4110, 4610SU. Additional $15.00 shipping due to weight. This additional charge will be added to your order. (Part No: S.60709)
$122.00

Bumper - For NAA, Jubilee, 600 and 800 Series (thru 1964), 2000 and 3000 (1965 and up), 2600, 3600, 4600 (1975 and up), 8N, 9N, 2N - has 3 front vertical bars to protect tractor grill plus heavy duty horizontal bumper. Axle mount with mounting brackets. This is an aftermarket item. Parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: BU1021)
$275.90

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Additional shipping charge of $140.00 per fender will be added due to size/weight. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Part No: D5NN16312LR)
$123.00

Fender - This Fender Skin, (bracket not included) measures about 21.5 inches by 42.5 inches. Replaces right hand or left hand side. For tractor models 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Additional $130.00 shipping. This additional charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: E1NN16315DA)
$75.00

Fender, LH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. ** $140.00 Will be added to shipping cost due to weight ** This additional shipping charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: E5NN16313DA)
$209.00

Fender, RH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. ** $140.00 Will be added to shipping cost due to weight ** This additional shipping charge will be added to your order. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: D8NN16312ABB)
$213.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $140.00 SHIPPING DUE TO SIZE AND WEIGHT. This additional charge will be added to your order. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 & 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: D5NN16312LRS)
$209.13

Front Shell - No side hole for air cleaner. NOT EXACTLY LIKE ORIGINAL - 2 PIECE GRILL WILL NOT FIT. Uses 1 piece grill part # D5NN8200A. For DIESEL models (2000, 3000, 4000SU use grill S.60623) or (S.60623M CURRENTLY UNAVAILABLE FROM YESTERDAYS TRACTORS), 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, 333. NOTES: Fit to tractor before painting. Can be used for GAS if you cut air cleaner tube hole on inside panel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: D4NN8N202C)
$290.00

Front Shell, with Side Hole for Air Cleaner - For tractor models 2000, 3000, 4000SU, 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, (333 diesel). Will work on gas models with some modification. Uses grill D5NN8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces D4NN8N202E, D5NN8N202AA (Part No: S.61627)
$295.00

Grill - One Piece Grill with holes for lights for 1968 and up. Measures 18 1/2 inches wide and 23 3/4 inches tall. (Part No: D5NN8200C)
$34.26

Grill Screen - Metal Grill Screen for 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532. One piece plastic construction like original. Grill screw clips (2 needed on most applications) available as S.60436. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: D5NN8200A-OEM)
$27.76

Grill Screen Clip - For tractor models 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532 (2 needed on most applications). Please verify quantity needed from your tractor. Replaces 45264S2, C9NN8B151B, D4NN8N213A, 83901581 (Part No: S.60436)
$5.46

Hood Handle - Handle Assembly, engine hood right hand side. For 2000, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3230, 333, 335, 3430, 3600, 3610, 3900, 3930, 4000, 4110, 4140, 420, 4600, 4610, 4830, 5000, 5030, 515, 531, 532, 535, 5600, 5610, 5910, 6600, 6610, 7000, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces C5NN16N644B, D6NN16N644A, 83909243. (Part No: D6NN16N644A)
$4.40

Hood Hinge - THESE FIT AFTERMARKET HOODS ONLY. These will NOT work for original hoods. Replaces 81811486, C5NN16N631B, C9NN16N631A (Part No: C5NN16N631B)
$18.84

Hood, LH - Fits 3 cylinder D=diesel tractors (4-1968/1974). No air cleaner hole, no louvers. For tractor models 230A, 231, 2310, 233, 234, 250C, 2600, 260C, 2610, 2810, 2910, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 3600, 3610, 3900, 3910, 4100, 4110, 420, 445, 445A, 450, 4600, 4610, 515, 530A, 531, 535, 540A, 540B, 545A, 545C, 545D. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Additional $125.00 shipping due to size and weight. This additional charge will be added to your order. (Part No: D3NN16626L)
$90.00