FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 1801 Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Adjusting Hole Cover - This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Item #: 125733, Ref: H2092) $9.10

Brake Shoe Adjusting Screw Spring - Must order 2. Price is for each. This Brake Shoe Adjusting Screw Spring is for tractor models: 501, 600, 700, 800, 900, 2000, 4000 series. 1801, 2030, 2130, 3500, 2100, 2300, 3000 (1955 to 1964). This item is priced EACH piece. If you order quantity of 1, your order will be adjusted to quantity of 2. Also replaces part numbers 49141 and 80049141. (Item #: 182025, Ref: NCA22219A) $9.30

Clutch

Clutch Disc, 10 inch - New, Organic, Spring Loaded, 15 Spline, 1 inch Hub. For tractor models 1801, 1821, 1841, (2000 4 cylinder), 2031, 2111, (2130, 2131 1958 and up), (4000 1962-1964 4 cylinder single clutch), 4031, 501, (600 single clutch), 601, 700, 701, 800, (900 single clutch), 901. Replaces E8NN7550FA, NDA7550B (Item #: 130151, Ref: NDA7550B) $75.00

No
Picture
Clutch Disc 10 Inch - Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Item #: 113378, Ref: 313299) $77.00

Clutch Disc, 9 inch - Clutch Disc: 9 inch Organic, Spring Loaded, 15 Splines, 1 inch Hub. Replaces E8NN7550GA, C0NN7550B, C0NN7550A. (Item #: 130147, Ref: E8NN7550GA) $85.00

Clutch Fork To Cross Shaft Pin - This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Item #: 178203, Ref: 352581S8) $2.20

Clutch Kit, 10 Inch, Single Clutch - This 10 inch Single Clutch Kit has a 10 inch 15 Spline on a 1 inch hub Spring Drive Disc E8NN7550FA, 10 inch Single Pressure plate NDA7563A, Pilot Bearing C5NN7600A and Release Bearing C0NN7580A. Includes Pilot Tool (not shown). This clutch kit is for tractor models with a 4 or 5 speed transmission. Tractor models: 600, 601, 700, 800, 900, 1841, 2000 4 cylinder, 4000 4 cylinder. (Item #: 119868, Ref: NDA7563AK) $150.00

Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Item #: 121833, Ref: 8N7563K) $115.00

Clutch Kit, 9 inch, Single Stage - Kit includes pressure plate, woven clutch disc, and bearings. For tractor models Dexta, Super Dexta, 1800, 1801. (Item #: 121833, Ref: F8N63SK) $115.00

Pilot Bearing - For tractor models 1800, 1801, 1821, 1841, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 260C, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 335, 340, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3610, 3630, 3910, 3930, 4031, 4100. 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. Replaces 81805417, B7600A3, C5NN7600A (Item #: 107933, Ref: C5NN7600A) $3.40

Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Item #: 163512, Ref: 9N7561) $43.40

Release Bearing Spring - This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Item #: 121564, Ref: 9N7562) $8.30

Cooling System

Fan, 5 Blade - Measure before ordering. Many of the models listed used more than one size fan. This fan measures 16 inch diameter, 0.625 inch pilot hole, and a 1.75 inch bolt circle (around the perimeter). Used on Ford tractors 1955-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 500, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 800, 801, 900, 901 (Item #: 163821, Ref: F8JL8600CA) $164.00

Fan Blade, 6 Blade, Pusher - 15.50" diameter, .500" pilot hole, 2.187" center to center on mounting holes. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, (2000, 4000 up to 1964), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 770, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860. (Item #: 114598, Ref: JE8600A) $92.00

Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964 4 cylinder tractors, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1/4 inches. Note, the draincock on this ratiator is on the lower front. This might interfere with narrow front end and indusctial models. If your draincock is located on a cast lower outlet pipe, order 135045 (Item #: 101693, Ref: C5NN8005ABECON) $210.00

Radiator - This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B. (Item #: 135045, Ref: C5NN8005AB) $340.00

Radiator Hose Clamp - This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Item #: 178164, Ref: 608287) $3.70

Radiator Hose, Lower - This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Item #: 182499, Ref: 313151) $14.50

Water Pump Mounting Gasket - Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Item #: 150390, Ref: EAF8513A) $2.90

Water Pump - with Press-On Pulley - This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pulley and is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 - gas and diesel engines. Comes with rear cover plate and gasket. For tractor models with press on pulley. USES 3 BLADE FAN PART number NCA8600S or NCA8600B 6 Blade Fan Uses 4 1/4 inch mounting bolts on a 3 1/4 inch circle. (Item #: 100556, Ref: S.60627) $46.00

Decals and Emblems

Emblem Bracket - For Part number 312718. Replaces C0NN16600BR (Item #: 125337, Ref: 312741) $9.50

Hood Emblem - For Industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4030, 4040, 4130, 4140. Metal back, 5 7/8 inch outside diameter. Replaces: 312718, C0NN16600E, C0NN16600F. Bracket available as part number 312741. (Item #: 124177, Ref: 312718) $114.00

Drive Train

Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref: 8N4233A) $6.10

Center Housing To Transmission Case Gasket - This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Item #: 178192, Ref: 310590) $6.00

Input Shaft - This input shaft is for the 4 Speed transmission. It has 15 Spline, and is 17 inches in overall length. It is for tractor models 1801, 1821, 1841, 2000 series, 2030, 2111, 2120, 2130, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 700, 701, 800, 801. (Item #: 179311, Ref: 311203) $196.00

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref: 9N7120) $96.00

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref: 8N7010) $18.30

Electrical System

Cable Clip - This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5/8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Item #: 182920, Ref: 1A13377A) $2.80

Coil - Six Volt - This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Item #: 183737, Ref: 8BA12029) $26.00

Coil Wire Assembly - This Coil to Distributor Wire is exactly like the original, with molded ends. Used on Ford 4 Cylinder tractors from 1955-1965. Replaces original part number FDN14302A. (Item #: 182945, Ref: FDN14302A) $11.00

Distributor - With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Comes with Points and Cap. Replaces 311185. Can use Pertronix Electronic Ignition number 1244A if desired. (Item #: 105328, Ref: FDN12127A) $106.00

Distributor Bushing - This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Item #: 111462, Ref: 7RA12132A) $5.40

Distributor Bushing and Shim Kit - Distributor Bushing and Shim Kit. Fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Item #: 178573, Ref: FDS3253) $39.00

Distributor Cap Hold Down Clip - This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Item #: 178205, Ref: 7RA12144) $4.60

Distributor Clamp Rivet - This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Item #: 182949, Ref: B12145) $1.30

Distributor Power Inlet Screw Kit - This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Item #: 183738, Ref: 350032-KIT) $7.40

Distributor Primary Conductor - Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Item #: 111464, Ref: 8N12209) $5.90

Distributor Rotor Clip - For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Item #: 110785, Ref: 8N12213) $3.60

Generator Brush - For 6 volt generators on models: 600 series, 601 series, 700 series, 701 series, 800 series, 801 series, 900 series, 901 series, NAA, 2000 4 cylinder, 4000 4 cylinder. Replaces GFD7502, 142-14002, F-14, 027-504, 34450-501, C0AZ-10069-B, B4AZ-10069-A, FBN10069A, B4A-10043-A, C0AZ-10043-A, C0AF-10069-A, FAA10069A, B6A-10043-B, 01A-10069, 2900345, 0A-10069, 3B-7504 (Item #: 185288) $2.20

Glow Plug - Used in 144, 172 and 192 cubic inch 4 cylinder diesel engines, two of these glow plugs fit into 310659 intake manifold. Used from 1957-1964 these glow plugs replace Ford part numbers 86550509 and D8NN9A36AA. These engines were used on Ford Models 1801, 1811, 2000, 2030, 2031, 4000, 4030, 4040, 4130, 4140, 501, 541, 601, 621, 641, 651, 661, 671, 701, 741, 771, 801, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (Item #: 167679, Ref: D8NN9A36AA) $43.90

Starter Post Kit - This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Item #: 183576, Ref: A9AZ11102B) $8.50

Starter Solenoid, 6 Volt - This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. Insulated Base, does not ground through mounting bracket. Will work in tractors converted from 6 to 12 volts, using a 4 post solenoid. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Item #: 105690, Ref: 311007) $17.90

Starter Solenoid, Isolated Base - This 12 volt, 4 post Starter Solenoid is for the following 1964 and earlier models: 1800, 1801, 1811, 1841, 1871, 1881, 2000, 2030, 2120, 4000, 4030, 4040, 4140, 4120, 4130, 4140, 501, 6000, 601, 701, 801. Does NOT ground through base. Used for 12 volt converted systems and 4 cylinder diesels, 1958-64 except Lucas equipped. For a 12 volt grounded base, use part number 105689 (Item #: 112395, Ref: 311006) $12.40

Starter with Drive - This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Item #: 112209, Ref: C3NF11002D) $120.00

Engine Gaskets

Crankshaft Oil Seal Packing, Pair - This Crankshaft Oil Seal Packing is the original rope style rear crank shaft seal. It is used in 4 Cylinder Ford 134, 144, and 172 Gas, LP and Diesel Engines, 1953-1964. (Item #: 133438, Ref: EBU6701A) $6.80

Crankshaft Seal Kit, Rear - This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Item #: 182525, Ref: C0NN6701AKIT) $33.10

Front Crankshaft Wear Sleeve - This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Item #: 184669, Ref: RP301112) $67.00

Oil Inlet Tube Seal - This part replaces Ford/ New Holland numbers 500391 and EAA6594A. It is used on Ford 4 cylinder tractors, 1953-1964. Models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040 (Item #: 155434) $0.60

Pushrod Side Cover Grommet - Pushrod Side Cover Grommet. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Item #: 165425, Ref: C0NN6589A) $1.80

Valve Cover Stud Grommet - This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Item #: 178199, Ref: EAF6570A) $4.90

Valve Cover Vent Breather Gasket - This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Item #: 172956, Ref: EAF6863C) $1.70

Valve rocker arm cover gasket. - Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Item #: 128766, Ref: EAF6584C) $11.10

Engine Parts

Connecting Rod Nut - This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Item #: 183734, Ref: 7HA-6212) $1.70

Crankshaft Pulley - Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Item #: 169121, Ref: C0NN6351A) $94.00

Flywheel Bolt Kit - From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Item #: 179185, Ref: 350645S) $28.30

Governor Compensating Spring - Mounts between Bellcrank and under battery tray, 6.535 inch overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Item #: 178181, Ref: NCA9827A) $8.00

Lifter - Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Item #: 160900, Ref: F3JL6500AA) $11.30

$Ford 1801 Push Rod, 5\16 Diameter$
Push Rod, 5/16 Diameter - If replacing 1/4 inch outside diameter push rod (early 134 engines), you must also use part number 131473 rocker adjusting screw, and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5/16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Item #: 182481, Ref: 500356) $11.70

Valve Spring - Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Item #: 173016, Ref: EAA6513A) $2.50

Valve Stem Cap, Exhaust - This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Item #: 168344, Ref: 8EQ6550A) $4.70

Engine Pistons and Sleeves

Piston Sleeve, 172 Gas - Used on 172 Gas engines with 4.0 inch bore (3.90 is standard). Used 1954-1964 when 4.0 overbore pistons have been installed. (Item #: 184425, Ref: EAF6055D4) $36.90

Exhaust System

Exhaust Elbow With Gasket - Outlet is 1 5/8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801, NAA. All with 134 or 172 CID engine. Replaces NAA55250B (Item #: 185223, Ref: NAA55250BWG) $35.60

Extension Pipe, Curved - Outlet Pipe, curved section. Not for row crop or grove. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). (Item #: 115454, Ref: 311051) $36.30

Extension Pipe, Straight - Outlet Pipe Extension, straight section. Inlet 1-3/4 inch inside diameter, outlet 1-3/4 inch outside diameter, 60 inch length. For 172 CID gas engines. Tractors: 801, 1801, 4000 (4 cylinder 1958-1964). Not for row crop, grove, select-o-speed. (Item #: 115475, Ref: 311050) $31.80

Manifold Nut and Washer Kit - This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Item #: 153429, Ref: 33817-KIT) $9.00

Muffler and Pipe Assembly - For the following 144 cubic inch diesel tractors: 501, 601, 701. For the 4-cylinder 2000 series (1958-1964). Also for the following 172 cubic inch gas diesel tractors: 801, 901, 1801, the 4-cylinder 4000 series (1958-1964). This vertical two-piece muffler and pipe includes clamp. Custom design ready for assembly. Pipe inlet 2 inch inside diameter, outlet 2 inch outside diameter. (Item #: 182600, Ref: M1111) $89.00

Muffler Heat Shield - This is Muffler Heat Shield is exactly like the original. It is used on Ford Tractors with 134, 172 and 192 4-cylinder gas and diesel engines, 1953 - 1964. It is 25-3/4 inch long. Has a red powder coat finish. Replaces original part number NCA5290A (Item #: 153378, Ref: NCA5290A) $53.00

Muffler, Horizontal - 2 inch inlet inside diameter, 1-7/8 inch outlet outside diameter, 13-1/2 inch shell length, 17-1/2 inch overall length, 3-1/2 inch body diameter. For tractor models 1801, 2000, 4000, 501, 601, 701, 801, 901. (Item #: 100583, Ref: 310079) $38.88

Vertical Exhaust Assembly - For tractor models: Jubilee, NAA, 600, 700, 800, 900, 2000 (1964 and earlier), 4000 (1964 and earlier). All with gas engines. Two piece assembly. NO MUFFLER INCLUDED. THIS ASSEMBLY GIVES MAXIMUM EXHAUST FLOW FOR MORE POWER. 1 3/4 Inch OUTLET DIAMETER, 1 5/8 Inch INLET DIAMETER. (Item #: 115465, Ref: FDE170) $54.00

Fuel System / Air Intake

Adjustable Needle Assembly - 3/8 inch x 24 thread. Main Adjusting Needle. For tractor models: 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 1958 to 1964 with 172 cubic inch engines with one of the following Marvel carbs TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX662, TSX688, TSX689, TSX695, TSX756, TSX768, TSX769, TSX772, TSX774, TSX775, TSX777, TSX784, TSX792, TSX801, TSX811, TSX813, TSX816, TSX97. Replaces 311605. (Item #: 108463, Ref: C3NN9G504A) $27.80

Air Cleaner Clamp - Air cleaner oil cup clamp 4 1/2 inches. For tractor models: 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 2N, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, NAB. (Item #: 111916, Ref: 311508) $14.30

Air Cleaner Oil Cup, Inner - Fits Oil Cup 311510 4-3/8 inch inside diameter. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 601, 701, 801, 901. (Item #: 112021, Ref: 311506) $11.50

Air Cleaner Tube - Metal Tube is 90 degree with 2 inch outside diameter. For gas and LP models: 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4000 4 cylinder, 4030, 4040, 4121, 4130, 4131, 4140. All 1958 and up. Replaces: 86531351, 311092. (Item #: 126389, Ref: 311092) $41.42

Carburetor - This is a new Original Marvel-Schebler Design carburetor. It Replaces carburetors marked TSX662, TSX769, TSX813 or TSX977. Center to center on the 2 mounting bolts is 2 11/16 inches. Fuel inlet is 7/16 inches. Note, TSX813 and TSX662 use 3/8 inch fuel bolt. If replacing one original TSX813 or TSX662, you will need to replace your sediment bowl and your banjo bolt to 7/16. Used on Ford 172 Gas Engines 1957 - 1964. Replaces Ford / New Holland numbers: 310015, 312955, C0NN9510C, C0NN9510G (Item #: 184573, Ref: TSX813) $390.00

Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 161 series Zenith carburetors. For Zenith 13876, 10457, 12566, 12566B, 13876, 12522, 12522B, 13878, 13877 (Item #: 183586, Ref: BK44V) $27.70

Choke Knob - For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. 10-32 thread. (Item #: 178058, Ref: 9N9703) $5.70

Foot Throttle Rubber Bumpers - These bumpers are used on Ford Industrial Tractors built between 1958 and 1964 with foot control throttle. (Item #: 182913, Ref: 372117-KIT) $8.60

Friction Disc for Throttle Control Lever - This Throttle Friction Disc is 3 inches in diameter and has a 1/2 inch center hole. Replaces part number C5NN518B, 83924272, 83977032, 9N518, E6NN9R536AA, 311503. (Item #: 111446, Ref: C5NN518B) $2.00

Fuel Bowl - Fuel bowl. 1 1/2 inches diameter bottom and 1 7/8 inches long. For tractor models (4 cylinder engines) 600, 800, 900, 1801, 2000, 4000, 501, 601, 701, 801, 901. (Item #: 105385, Ref: 311276) $9.00

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, NAA, NAB, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Item #: 184806, Ref: C5NN9030D) $10.30

Fuel Filter Valve Stem to Carb Body Gasket - 0.443 inch inside diameter x 0.600 inch outside diameter x 0.047 inch thick. Fiber gasket. For tractor models 4000 4 cylinder, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140 (172 cubic inch gas engine with serial number 126525 and up), (6000 gas late 9/1960 and up). (Item #: 173184, Ref: NCA99180A) $1.50

Fuel Line - Measures 1/4 inch diameter. Line, 15-1/2 inches long. For use with Fuel Valve part number 311292WOR on the following models with 172 cubic inch gas engines from serial number 11977 to 126524: (some 801), 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881. (Item #: 157764, Ref: 310918) $68.00

Fuel Line - This Fuel Line is accurate for replacement of part numbers NCA9282D / New Holland 86593249. 5/16 inch line. Overall length is 15 1/2 inches. It is used on Ford 800 and 900 series tractors with 172 cubic inch gas engines. It may also be adaptable for 1959-1964 Ford tractors with 172 cubic inch engines. Verify 5/16 inch fuel line. Will fit into C0NN9285A-WOR. If 1/4 inch fueling fittins are needed use 310918. (Item #: 158212, Ref: NCA9282D) $19.30

Injection Line, Cylinder 1 - For 4 cylinder models all built after 1-1-1958. Replaces 500734. (Item #: 162804, Ref: C0NN9A555E) $34.60

No
Picture
Injection Line, Cylinder 2 - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2130, 2000 series, 2030, 2031, 2111, 2120, 2131, 4000 series, 4030, 4031, 4040, 4120, 4121, 4130 all built after 1-1-1958. Replaces 500736. (Item #: 162805, Ref: C0NJN9A556E_) $33.70

Injection Line, Cylinder 2 - For 4 cylinder models built after 1-1-1958. Replaces 500738. (Item #: 162805, Ref: C0NN9A556E) $33.70

Injection Line, Cylinder 3 - For 4 cylinder models all built after 1-1-1958. Replaces 500738. (Item #: 162806, Ref: C0NN9A557E) $32.10

No
Picture
Injection Line, Cylinder 4 - For 4 cylinder models all built after 1-1-1958. Replaces 500740. (Item #: 162807, Ref: C0NN9A558E_) $32.50

Pre Cleaner Assembly - Air Pre-Cleaner Assembly with a 2 inch base inner diameter and a 5 1/2 inch bowl. Fits models 1801, 2000, 231, 2600, 3000, 335, 3600, 4000, 4600, 5000, 515, 531, 532, 6000, 801, 901 Replaces B9NN9A660A, 86555327, B9NN9A667A, and C0NN9A660A. (Item #: 186846, Ref: 101579AS) $81.00

Precleaner Cap Assembly - This new Air Pre-Cleaner Cap Assembly fits tractor models 1801, 1811, 1821, 1841, 1871, 2000 3 cylinder, 2600, 3000, 3600, 4000 3 cylinder, 4600, 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1881, (5000 Gas with Oil Bath Air Cleaner), (532 Diesel with Oil Bath Air Cleaner ), (6000 Gas/Diesel with Oil Bath Air Cleaner). Industrial: 231, 335, 515, 531. Replaces: 81823387, 86555327, B9NN9A660A, B9NN9A667A, C0NN9A660A. It has a 2 inch inside diameter plastic base, 5-1/2 inch pre-cleaner outside diameter. MEASURE BEFORE ORDERING. (Item #: 186846, Ref: B9NN9A660A) $81.00

Sediment Bowl Assembly - This Sediment Bowl Assembly for tractor models 2000, 600, 700, 800, 900 all with 4 cylinder small carb. Sediment bowl assembly. 1954-64 With 134 cubic inch gas and using 1/4 inch fuel line thread and 3/8 inch mounting bolt hole. 1954-57 With 172 cubic inch gas up to Serial Number 126524 with 1/4 inch fuel line thread and 3/8 inch mounting bolt. Verify fuel line and mounting bolt before ordering. Replaces OEM NCA9155D. (Item #: 105384, Ref: NCA9155D) $17.60

Sediment Bowl Assembly - Sediment Bowl has a 7/16 inch bolt hole and 5/16 inch fuel line. For tractor models 801, 901, 4000 (1960 to 1964), 6000, 1801 Series. (Item #: 189627, Ref: C0NN9155A) $19.40

Sediment Bowl Assembly - Fuel filter assembly, gasoline, plastic sediment bowl type has 1/4 inch fuel line thread and 7/16 inch mounting bolt hole. Used on 1957-60, Some, with 172 cubic inch gas engine Serial Number 126525 and up. Originally used 1957-1960. Verify bolt and fuel line before ordering. Replaces 311272 (Item #: 105387, Ref: 311272) $23.70

$Ford 1801 Sediment Bowl Retaining Bolt 3\8 Dia.$
Sediment Bowl Retaining Bolt 3/8 Dia. - Banjo bolt. Length is 1 3/8 inch with 3/8 inch diameter-24NF threads. 2000 4 cylinder, 501, 601, 701 (1958 to 1964 with 134 cubic inch engine), 801, 901, 1801 (1958 to 1960 with 172 cubic inch gas engine up to serial number 126524), 2000 4 cylinder. If you need a gasket for this bolt, order 2 of part number NCA99180B. (Item #: 126815, Ref: 86531362) $14.40

$Ford 1801 Sediment Bowl Retaining Bolt 7\16 Dia.$
Sediment Bowl Retaining Bolt 7/16 Dia. - Banjo Bolt. Length is 1 1/2 with 7/16-20NF threads. Fits 4000 4 cylinder, 801, 901, 1801 (1960 to 1964 with 172 cubic inch gas engine serial number 126525 and up), and 6000. If you need a gasket for this bolt, order 2 of part number NCA99180A. (Item #: 126816, Ref: C0NN9A349B) $19.00

Thottle Control to Bellcrank Rod - This Throttle Control to Bellcrank Rod is used on non-diesel fords, 1953 to 1964 and is 4 1/4 inches overall length. It replaces original part number NAA9815C. (Item #: 183034, Ref: NAA9815C) $11.70

Throttle Bellcrank Friction Disc Spring Washer - 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Item #: 178048, Ref: NAA99778B) $15.00

Throttle Control Rod - 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2111, 2120, 2030, 2130, 4000, 4030, 4040, 4121, 4130, 4140 1953 thru 1964 gas only. Replaces C0NN9A790A. (Item #: 179893, Ref: NAA9815F) $30.10

Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cylinder, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 4-Cylinder Gas 1953 thru 1964. Replaces 86552618. (Item #: 153500, Ref: EAF9818C) $16.00

Throttle Control to Governor Rod - This Throttle Control to Governor Rod is used on Ford tractors models 600, 601, 700, 701, 501, 800, 801, 900, 901, 2000, 4000 and 1801, 1955-1965. It replaces original part number NCA99817A (Item #: 183037, Ref: NCA99817A) $18.30

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Fuel Sending Unit Gasket - This gasket is used with 310938 Fuel Sending Unit. (Item #: 178195, Ref: B9NN9276A) $7.50

Oil Pressure Gauge, 80 Pound, Black - For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Item #: 121629, Ref: FAD9273A_Black) $11.90

Proofmeter Drive Adapter Shaft - For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Item #: 113716, Ref: EAF17375D) $21.10

Proofmeter Drive Bolt - This Drive Bolt fits the following models with Vane and Piston Type Hydraulic Pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Item #: 113717, Ref: EAF951A) $13.20

Proofmeter Drive Bushing - For tractor models 1953 to 1964: 2000 and 4000 4 cylinder, 501, 541, 600, 700, 800, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. Verify size 1.275 overall length, 5/8 - 18 threads. Fits Vane and Piston Type Pumps. (Item #: 113715, Ref: EAF17381A) $21.40

Hitch / Drawbar

Eyelet Assembly, Check Chain - This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Item #: 111911, Ref: EC0N660A) $5.30

Hydraulic System

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Item #: 178070, Ref: 9N527) $16.00

Draft Control Spring Plate, with Pin - This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Item #: 178077, Ref: 8N527) $18.10

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $27.00

Hydraulic Lift Cover Repair Kit - Hydraulic Lift Cover Repair Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All prior to 1965. Kit contains (1) C0NNB999A seal, (1) NCA473A washer, (1) 9N532 gasket, (1) NCA502A gasket and (20) O-rings. Will work for Dexta and Super Dexta if piston has been changed to o-ring and back-up ring style. E11GF9 single groove gland seal is available separately. (Item #: 113538, Ref: LCRK5564) $7.20

Hydraulic Lift Oil Level Dipstick - Fits Ford 4 Cylinder tractor models: (1954 to 1964) 1801, 2000, 4000, 600, 601, 700, 701, 800, 801, 900 and 901. Replaces NCA927B. (Item #: 126537, Ref: NCA927B) $18.40

Hydraulic Pump Valve Assembly - Hydraulic Pump Valve Assembly fits 4 cylinder Ford Tractors built between 1954 and 1964. For the following models: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2130, 2131, 4000 4 cylinder, 4030 4 cylinder, 4031, 4040, 4110 4 cylinder, 4120, 4121, 4130 4 cylinder, 4131, 4140 4 cylinder, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAB. It replaces original part numbers 86512642 and NCA638C. (Item #: 178920, Ref: NCA638C) $132.00

Hydraulic Wobble Shaft Plate - For tractor models 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. Replaces 81813626. (Item #: 172706, Ref: NCA859A) $56.00

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Item #: 126615, Ref: 9N521) $8.30

Lights

Light Switch, OEM Style Knob - If you want your tractor to look as original as possible, this light switch has a knurled knob, like when it was new! Used on Ford tractors, 1955-1964 (Item #: 178063, Ref: FDN11654AOE) $10.10

Sealed Beam Bulb 12V - Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Item #: 111228, Ref: 70230252) $16.00

Tail Light - This is a Duolamp Tail Light and Bracket Assembly used on Ford Tractors 1958 and later. Fits models: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801. Replaces: 310064, 86633401, 86639447, C5NN13403A, D2NN13403A. (Item #: 125323, Ref: 310064) $63.00

$Ford 1801 Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Taillight Mounting Bracket - Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Item #: 125325, Ref: 8N13423) $10.50

Oil System

Gasket, Oil Pan Drain Plug - Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Item #: 110499, Ref: 8N6734) $1.50

Oil Filter Mounting Gasket - This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 1801, 1811, 1820, 1841, 1871, 1881, 2000, 2030, 2110, 2111, 2120, 2130, 2121, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Item #: 172949, Ref: EAA6838A) $1.40

Oil Pump Cover Gasket - Used on Ford 4 cylinder tractors, 1952-1964 with gear type oil pumps. (Item #: 189623, Ref: EAA6619C) $1.90

Oil Pump Drive Shaft, Hex - This Hex Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1954-1964. May also be in a 1952-1953 (Item #: 182495, Ref: EAF66646D) $25.90

Oil Pump Drive Shaft, Slotted. - This Slot Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1952-1953. May also be in a 1954-1964 if using a slot shaft Oil Pump. (Item #: 166349, Ref: EAF66646B) $9.10

PTO / Driveline

Bearing, PTO Shaft - This PTO Shaft Bearing is for the original 1 1/8 inch shaft, measures 2 7/16 inches outside diameter, 1 3/16 inch inside diameter, 5/8 inch width. For 8N, 9N, 2N, NAA (1953-1954), Jubilee, NAB, 600 thru 1956. Replaces 9N715C. Also used as a PTO Shifter Support Housing Bearing with 3 and 4 speed transmissions. Used as an upper PTO Countershaft Bearing on 1300, 1310, 1320, 1500, 1510, 1520, 1600, 1620, 1630, 1710, 1715, 1725, 1925 Replaces 210064, 9N715B, 9N715BC, 9N715C, SBA040106206 (Item #: 180397, Ref: 9N715BC) $6.30

PTO Coupler - This PTO Coupler is inside the tractor. It is used on 4 and 5 speed transmissions, 1955 and later. It is 2.16 inches long. (Item #: 173003, Ref: NCA717A) $105.00

Sheet Metal / Body Parts

Bumper, Side Panel To Hood - This pad fits between the top of the front side panels and the hood. Used on Ford Tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. It is glued in place. Replaces original part number NAA88131B. (Item #: 178076, Ref: NAA88131B) $5.60

Hood Latch Assembly - This Hood Latch Assembly is used with Top Hood Door Latch (not included) part number NAA16628C. Two are used per hood. It is used on Ford Tractors NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953-1964. Replaces original part number NAA16645C. (Item #: 178160, Ref: NAA16645C) $51.00

Top Hood Door Latch - The new Top Hood Door Latch is used in Ford Tractors from 1953-1964. Models: NAA, 501, 600, 601, 701, 800, 801, 900, 901, 1800, 1801. It is used with NAA16654C latch assembly. It replaces original part number NAA16628C. (Item #: 179284, Ref: NAA16628C) $12.30

Steering

Drag Link Clamp - This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Item #: 184034, Ref: 8N3287) $6.20

Power Steering Pump, Belt Driven - Redesigned Pump uses a bearing instead of original bushing. Can be adapted to tractors using Char-Lynn Power Steering with Eaton Pump. Does not include brackets, top mounted reservoir or pulley. Shaft diameter measures .670 inches and the shaft length (where pulley mounts) measures .575 inches. There is a 2 inch thick pump housing (where bracket bolts to). SOME FORD APPLICATIONS WILL REQUIRE A NEW PRESSURE HOSE TO BE MADE FOR 3/8 inch MALE INVERTED FLARE. Pressure is preset at 1.32 GPM. For tractor models (2000, 4000 4 Cylinder), 601, 701, 801, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140 1958 to 1964. For tractors with canister on top pump, (700, 740, 900, 950, 960 1955 and UP for tractors with canister on top pump). Replaces: C0NN3A674H and C3NN3A674C. Can be used with ABC1417 or EBJ33556A Pulley. (Item #: 113730, Ref: S03-1003) $417.87

Seal, Spindle Pin - For tractor models 1801, 250C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 3550, 4000, 4040, 4140, 420, 4400, 445, 445A, 445C, 450, 4500, 455, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6610O, 6810, 7010, 4610O, 8010, TT55, TT75. (Item #: 128511, Ref: TDBA3125A) $2.90

Spindle Kit, Complete - Spindle repair kit less spindle with unfinished bushings Contains (2) TDBA3110A bushings (Unfinished), (2) 87414 grease fittings, (1) D8NN3115BA 1.13 inch diameter pin, (1) C7NN3123A thrust bearing, (2) TDBA3125A seals, (1) 81T3122 spindle pin locking pin, (1) 81547 lock washer and (1) 50456 nut. Replaces DEPN3115A. (Item #: 125389, Ref: S.75082) $109.00

Steering Column Grommet - Models: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 cylinder 1955-1964), 1801. (Item #: 118307, Ref: NCA3578A) $10.70

Steering Column Seal - This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Item #: 124493, Ref: 8N3570) $2.90

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Retainer Seal - This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125 inch I.D., 1.442 inch O.D. and 0.200 inch wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Item #: 124153, Ref: 8N3591B) $5.30

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Item #: 124501, Ref: 8N3517) $25.60

Steering Shaft Gear Thrust Bearing Retainer - For tractor models 1801, 2130, 3500, NAA, NAB, 2000, 2031, 2100, 2110, 2111, 2120, 2131, 2150, 230A, 2300, 231, 2310, 233, 2600, 2610, (3000 from 1-1965 to 12/1974), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 333, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4031, 4100, 4110, 4120, 4121, 4130, 4140, 501, 530A, 531, 541, 600, 601, 611, 620, 621, 630. (Item #: 124154, Ref: 8N33581) $4.30

Steering Wheel Dome Nut Washer - With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. Replaces 356515S, 356515S36 (Item #: 126719, Ref: 356515S) $4.00

Steering Wheel Nut, Chrome - Nut, Steering Wheel ACORN style. 11/16 inch-20. CHROME PLATED. For Ford 4 Cylinder Tractor Models, 1947-1964. (Item #: 101422, Ref: 351114CC) $7.30

Wheels

$Ford 1801 Front Hub, Heavy Duty \ Industrial$
Front Hub, Heavy Duty / Industrial - Used on Heavy Duty and Industrial Front Ends. 3000, 4000 (4cyl, heavy duty front axle), 5100, 5110 (heavy duty axle), 5200, 5190, 5600 (10x16 tire), 5610 (heavy duty axle), 5700 (10x16 tire), 6600 (10x16 tire), 6610 (heavy duty axle), 6700 (10x16 tire), 6710 (heavy duty axle), 7100, 7200, 7410 (heavy duty axle), 7600 (10x16 tire), 7610 (heavy duty axle), 7700 (10x16 tire), 7710 (heavy duty axle), 8000, 8010, 9000, TW10, TW20, TW30, Industrial: 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 1801, 3400, 3500, 3550, 4400, 4500, 4410. It uses C5NN1107F studs, and WBKFD7 wheel bearing kit, not included. Replaces OEM part number 313020. Verify part number before ordering. (Item #: 100662, Ref: 313020) $72.00

No
Picture
Front Wheel Bushing - For tractor models 1801, 50C, 260C, 3000, 340, 340A, 340B, 345C, 345D, 3500, 4000, 4040, 4140, 420, 4410, 445, 445A, 445C, 450, 4500, 5110, 515, 535, 540, 540A, 540B, 545, 545A, 545C, 550, 555, 555A, 555B, 5610, 6410, 655, 655A, 6610, 6810, 7610. (Item #: 153562, Ref: TDBA3110A) $7.00

Front Wheel Rim 5.50 x 16 - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces 82005056, 83960327, 83926073, 83954658, 81816955, E6NN1007BA, C7NN1007J, C9NN1007C, 83936990, D2NN1007N, D2NN1007R29Z, D2NN1007S, 83900159, C5NN1007A (Item #: 116854, Ref: FW55166) $78.00

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $23.00

Rear Wheel Center - This disc is used on multiple Ford models. Check measurements before ordering. Disc, rear wheel 28 inch and 32 inch, 8-bolt hub, 6-bolt rim. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Replaces Ford OEM numbers D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B. (Item #: 149804, Ref: D9NN1036CA) $195.00

Wheel Rim, Rim Size: 10 x 28 - The Assembly Contains a 10 x 28 Rim, the center disc and hardware. Comes assembled. Suitable for Tire size: 12.4 x 28, Alternative Tire size: 11.2 x 28. The rim measures 10 Inches from bead to bead where the tire rests. Center hole: 4-5/16 inches, hub pattern: 8 lug - 6 inch bolt pattern. Verify all measurements before ordering. Replaces D9NN1036CA, D9NN1036CA, F1NN1036KA, 86512668, C5NN1036D, 957E1017B, C0NN1050F, NCA1020B, 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. Additional $35 shipping due to weight. (Item #: 178951, Ref: S61968) $657.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.20

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.40

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.20

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.40

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 1801 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Ford 1801 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 1801 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Ford 1801 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Ford 1801 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Ford 1801 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.00

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.70

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $10.70

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $40.60

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $19.00

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.27

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.20

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $64.00

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $24.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $32.10

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $75.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $30.30

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $49.00

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $270.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $53.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.50

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $24.00

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.70

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $86.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.60

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $8.50

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $21.40

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $9.10

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.00

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $90.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $35.00

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.00

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $46.60

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $76.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $76.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $37.90

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $31.30

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Item #: 183819, Ref: WHS064) $82.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.20

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $112.00