Tractor Talk Discussion Board |
IMT / MF
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by SES on June 07, 2005 at 04:34:18 from (4.226.201.233):
Can any of you tell me if the manual for a MF35 with a Perkins Diesel will work to repair a IMT 539 with a Perkins diesel? Wor would it be a TO35 Diesel? I don't know the difference in the two. I have problems with the hydraulics on my 539 and can't seem to get it adjusted right. I have flushed the box several times thinking it might be contamination but it still has sporadic times when it will raise as high as it will go and will not release to go down unless you turn off the tractor. Next time I start it it returns all the way to the top. If it sits a day or two sometimes it will then work fine. Any ideas or help would be very appreicated. Thank you in advance.
Follow Ups:
Home
| Forums
Today's Featured Article -
Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|