Posted by Jo Bird on April 24, 2012 at 14:05:41 from (65.37.17.107):
In Reply to: 2010 JD power steering posted by ron rudoski on April 22, 2012 at 05:27:37:
Early 2010's have a proportioning valve on the front of the case that covers the front of the transmission case. Not in the pumps. Remove the round cover on the right side of the bell housing above the foot rest. Behind the line that supplies the power steering pump oil is a three bolt cover. Behind it is the shuttle and a spring. The spring is NLA from JD. I had to make one from a stock length of spring of similar size and diam. so far has worked for 6 months.. their was a change in the design in early production. One has a round cap that sticks out and the other one is a flat triangle cover. They will not inter change, been their. PS the pump WILL come out with out splitting the tractor if you need to replace it, but with 2200 lbs pressure I doubt that its the pump. You can check the JD web site to see the diagrams. Let us know what you find.. Jo
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.