Posted by Josh Blackburn on March 28, 2013 at 04:41:23 from (174.239.34.44):
In Reply to: welded rods posted by JDguy1 on March 27, 2013 at 18:31:23:
Depends on your engine. We have put some good size g's together welded boxed rods. One 840 cube with 12 to 1 compression. All of our personal big deeres are welded rods. I built a good size B for a gentlemen in NY and it has welded rods not boxed from top to bottom, he turns it at around 22-2300 rpm or better. There's some vids on YouTube. http://m.youtube.com/#/watch?v=78qAAhvcFFs&feature=plcp. That being said I have had succes with welded Rods. If done correctly they will hold. I've seen non boxed Rods in a 883 cube g. So far they have held but I wouldn't want to be on the seat. What engine are you trying to build? SiZe and rpm are a factor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.