Posted by D Slater on January 18, 2013 at 13:45:22 from (184.15.8.141):
In Reply to: Re: 300 rebuild posted by redkev44 on January 18, 2013 at 12:37:27:
Just purchase a sleeve and piston set for a C-175. Now most if not all places sell the same S&P set for a C-169 and C-175. Blocks are the same size, All sleeves were the same OD size for both. If the engine serial number is below 48049 (farmall tractor engine) put adapter piston pin bushings in the rod end. If that serial # or above the rods are the same as a C-175. Not very common to find a 300 engine anymore with 3-9/16 pistons in it as most were already changed to 3-5/8. Have you checked yours?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.