Posted by ensbos on April 19, 2014 at 07:44:34 from (166.181.3.88):
In Reply to: G900 LP posted by Howard H. on April 17, 2014 at 19:26:07:
Your tractor appears to be one of the later 69 G-900s with close center hydraulics. Someone one here will know the specifics. But if I remember correctly in Feb of 69 they changed a few things on those tractors hydraulics more inline with the 50 series tractors. You will notice the fenders are different that of a normal M670 G900 or G1000.It also has the 4 hole 50 series wheels, power assist external steering cylinders with the heavy front axle. It will also likely have the high mount alternator than is exposed instead of hid behind the front side tin work and no power sterring pump like a vista. The very very last ones had a three speed torque, making them essentially a g950 with the earlier tin work of g900. It also looks to have different heads and blocks, which is not unusual however 4 5/8 bore blocks and pistons would make the engine a 504 and the tractor basically a close center hydraulic G1000 or g1050 depending on which torque it has. That is why they had the serial number split, that is if I remember correctly.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.