Posted by Ralphwd45 on June 24, 2013 at 23:56:32 from (216.227.39.106):
I removed the hydraulic pump, from my 335 MM utility, that runs the loader. I intend to transport it to a rebuilder in the morning, along with the 2 spool gresen control valve, that is letting the bucket to free fall. Looking on the computer, for a simular pump, so I could find out the GPM of my present pump, I noticed that the pumps were rated with max GPM at 1800 RPM. That makes me wonder if my pump is OK, but not being turned fast enough, by the belt pulley shaft! Does the PTO, and the belt pulley both turn at 540 max? If so then I need a way to turn the pump faster. My present pump is a Dayton model 6z005, and I havent been able to get the spec's from this puter. Any one know how fast a 335 minnie's belt pulley shaft turns?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Crank Start a Tractor - by Staff. This interestin discussion is from the Tractor Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
