Posted by Canuk on September 05, 2010 at 16:04:23 from (208.114.164.7):
In Reply to: 102 Jr shifter help? posted by Bruce S IL on September 05, 2010 at 07:26:04:
Quoting Removed, click Modern View to see
Would there happen to be a guide bolted to the gear case cover that holds/guides the shifter?
With my gear case cover off and looking striat down, I have 3 slider blocks supported by rails that move the shifter forks and engage the selected gear with the planetary shaft.
The tail of the shifter shaft (inside the tranny) has nothing to stop it from moving two of the sliders (forward or reverse) and thus engaging two gears at once.
I'm thinking there must be a guide either bolted to the removable gear case housing, or inside the tranny to align the shifter with the sliders.
Ha, I must sound like my wife describing problems with her car on here....I understand now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.