You would want the 2" bore cylinder for that loader.
The Farmhand part # is 22-1049 for the 2" bore cylinder, and is listed as non-current.
The 2.5" bore cylinders on the loader for the 5610-2 have a Farmhand part # of 22-1021.
If you need dimensions of cylinders, post back, and I'll do some measuring for you.
HTH, Dave
Edit: First 2 pictures are of the Model 30 (??) on my 3910. I can't verify that it's a model 30, as I've never found a name plate on it.
This is a Model 22 on my 5610-2. The dimensions and geometry are identical on both loadersb, but the 22 is build a bit heavier, and has the larger bore lift cylinders. the lift cylinder length, pin size, stroke, etc are identical on both loaders. The 22 with the 2.5" bore cylinders has a lift rating of 2800 lbs. I think that the 2" bore cylinders wil give a lift of 2000 lbs (+/-) which is probably plenty on the swept back front axle!
This post was edited by Shetland Sheepdog at 18:23:39 03/09/13.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.