Thanks for posting that, for some reason I got hung up on that 3rd-4th hole dimension, tired long day, should not be crunching numbers LOL, well fresh look this morning, the strap that is the 4th hole can be tapped over, maintains the 1" vertical, and changes from 5" to 4 3/8" center to center 3rd & 4th hole which is what this share FF16-4 shows by dimensions. The dropped hole (1st hole) should work and the 1/8" horizontal discrepancy between 2nd & 3rd hole, 5 1/2"- 5 5/8" I would think there is enough wiggle room when bolting up. I checked your drawing vs Weise, minor dimension differences, has to be the same part, must be whomever reads the ruler I suppose. I believe this 4 bolt share in a rock share, not throw away, is what I am looking for and is correct for the frog on this plow, the Adams share was made to fit by skipping the front hole, and moving the strap off the mold board to center up.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.