I don't have any two customers that want the same thing, hardly. I came up with this formula and have it printed up on the back of my business cards. That way the customer can roughly figure out what he wants. The two wraps of mesh on stalks??? Main reason is cost of the wrap. You use a third less. Also most of the guys I bale for use these bale processors. They want as little mesh as possible and still hold the bale together. They don't remove the mesh before the processor. So they want less to wrap up inside of the processor. On my own I use three wraps. Now I don't use the cover-edge on stalks. I usually bed by setting my bales on end in the pen and then remove the mesh by hand. Then spread the bale with my skid-steer. I baled one year with the cover-edge mesh. When you stand the bale on end three or four inch's is under the bale. You have a he!! of a time getting it all out.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.