Posted by Billy NY on July 17, 2013 at 05:51:16 from (72.226.79.200):
While I'm at it, after doing the spindles, I should do the front axle pivot pin on this tractor, which to be quite frank, I wish I could replace at this point, but..... LOL we all know how that can be!
Anyone know if Pete Pfeiffer still offers the repair pieces for the cradle ? I have a spare cradle I got on the cheap, but wore, has the threaded pin, I assumed the '55 850 is the same. The center axle piece, is likely oval or out of tolerance, I can see the free play. IF so, what is the repair for that, or is it reasonable to assume the after market center piece would be just as good. At that point, just an axle bushing, the pin, and repaired cradle, seems relatively easy. Headed over to get that spindle off now, then make a parts order, nothing worse than looking in a field and seeing your tractor dead in the water LOL !
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.