Posted by Sean in PA on January 12, 2013 at 20:23:29 from (71.224.102.32):
In Reply to: Ford 2000 Offset posted by daverd4 on January 12, 2013 at 15:17:04:
For a 4 cylinder 2000, that's a very late 1964 serial number, maybe even into 1965, as they did still make the 4 cylinder models into 1965, even though they were still called "1964" models. So if it was made on the same assembly line as the 3 cylinders, after they had started making the 3 cylinders, then maybe the person that was stamping the numbers got confused and stamped 3 numbers on that one instead of 2, but that still doesn't explain the G at the end of the model number, or the date code that appears to be a 1966 code, but 21111 would be a 1963 and newer 2000 offset with a 4 speed transmission and non-live PTO. Is that the transmission that it has?
Another possibility for the 3 numbers is that the transmission was replaced at some point and that date code was the date that the replacement transmission was made, and whoever stamped it at the dealership when the transmission was replaced stamped the G at the end of the model number by mistake.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Magic Moments - by Tyler J. Woods. Magic moments don’t just happen. You have to help them along. This morning, I got up early. It is my day off from my regular workweek and I had a lot of things to do. It’s fall, and with winter coming on, there is a lot of work to do before weather closes in.
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.