Must be related to the engineers that put the one in the 466 inter motor in a 5088, I changed the other day for a customer, in 40oc below with wind chill and not wearing gloves half the time!. I needed a 1/4" more to get the heater out as it hit the starter, had to half remove the starter to get the space. The guy that designed that never talked to the guy that made the bolts to hold the starter,or the guy that designed the tractor frame rails, Had to use a 3/8 drive 12 point socket to fit the bolt heads as the 1/2" socket would not fit in the lug gap. Then had to use 18"+ of 1/2 drive extensions and a universal joint/ adapted down to 3/8 and a 3 ft knuckle bar to get enough torque to slacken the bolts then had to loosen them the rest of the way with my fingers. good luck with yours Regards Robert
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.