Posted by Don Hooks on November 26, 2013 at 11:58:28 from (99.0.60.247):
I use my 30 to cut grass, move a little dirt, and occasionally move my pontoon boat (it is a little heavier than the Fergy)- all on level ground. I"m building a boat ramp and would like to be able to launch and retrieve the boat with the tractor. The brakes work now that they have been relined but I"m convinced they wouldn"t slow the boat on the ramp. They are just too weak (I"m certainly not too light). I"ve been toying with the idea of replacing the drums and shoes with discs and calipers (and master cylinders) and there appears to be enough room if I can fabricate a mount for the calipers. Another thought is to add a couple of pieces to the existing linkage to multiply the force exerted on the shoes (at the expense of a longer pedal travel, unfortunately). Anybody done either of these and succeeded (or failed)?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.