RTR, Just a regular, run of the mill neglected M, Originally an Distillate Model from the hole in top of hood. Nothing special! Sheet metal is straight just surface rust Current owner has Never seen it run, Unless he can put a Battery on it, pour in some gas and it Starts Now...It is a Non-Runner, Scrap wt price!, Most Ms weigh ave 5000 K! 5000 x market price / lb or ton = on average $500. the less desirable wide front $100 if no welds or major repairs so a place to work off of IMO is $600. From pic tires are shot no value will cost you to get rid of. $900 is way too high, Put $400 in 100 dollar bills in you front shirt pocket, offer that. If he balks get $100 from out of your Left front jean pocket and add to the $400 if he balks, a $100 more from your other front jean pocket. Lastly $100 bill in your hip pocket for a last offer if he doesn't take that walk away! Remind him he will only get scrap wt price @ the salvage yard and he has to haul it to get best money in his pocket. Hope this helps! Later, John A.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
Looking 4 set 9 bolt hubs 3 1/8 inch to fit 60 to 4010 jd
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.