Farmall & IHC Tractors Discussion Board |
Re: Cultivation
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JT on January 28, 2005 at 14:13:10 from (69.220.203.201):
In Reply to: Cultivation posted by GWT on January 28, 2005 at 10:38:57:
GWT, The best thing to do is to mold board plow in the fall, then let it sit over the winter. If you plow in the spring the ground can get real cloddy, then you will never get a garden to grow. ground will never pack around seed/plant, so it looses moisture, is exposed to elements. The advantage of fall plowing is that when the gound freezes and thaws it fractures the soil, so all the big slabs will turn to good fine dirt. The thing you got to be careful about is to make sure your ground is dry when you work it. If you work it damp or wet, you will also have dirt cloads instead of a good seedbed. If you are plating large seed,such as corn, greenbeans, peas, you can get by with soil a LIITLE cloddy, but any fine seeds, seedlings, or plants need a good seed bed to make it out in the big world. If you cannot plow it, you can try a disk, but your root crops can have a hard time because the soil can be too hard to penetrate. Also make as few trips across as you can, including walking, every pass will pack you soil down and then it will be as hard as concrete. Depending on your soil type, this may not work for you, but it works good in this old black gumbo in Illinois. Good luck Jim
Follow Ups:
Home
| Forums
Today's Featured Article -
Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|