Farmall & IHC Tractors Discussion Board |
Tachometer drive cable - Farmall 806
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by KW on December 16, 2004 at 10:17:32 from (64.185.41.217):
I am having a hard time with the tachometer on my 806 diesel. I thought it was the cable but as it turns out the cable is okay and the tach itself works. When I went to the housing that connects the cable to the engine it appears this is the problem. I pulled off the housing tach connection, inside it was the gear assembly and the teeth seemed fine. What looks like the problem is that the gear assy has a round shaft and my cable is square. Could it be that there should be a bushing or something that sits inside for the cable to connect properly? If not I am told at the local dealership that the small gear assembly is over $55 and it appears that I should be able to put a bushing in it. Am I missing a part or something, I have a hard time seeing how the cable was able to ream out a perfect round cyl in this shaft without tearing up the cable? Thanks
Follow Ups:
Home
| Forums
Today's Featured Article -
Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|