Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: 560 is hard to shift to neutral af
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by R. Smith on May 04, 2004 at 19:09:28 from (64.232.242.239):
In Reply to: Re: Re: Re: 560 is hard to shift to neutral after posted by Hugh MacKay on May 04, 2004 at 02:52:16:
Thanks again Hugh. I guess I should have also mentioned that the TA lever is also missing so I couldn't do as suggested. I guess I'd hate to replace all the missing parts only to find out that there was another underlying problem like the pilot bearing you mentioned. I guess I could try to make/come up with the short adjustment lever on my own somehow and see if that helps. I noticed today that the shifting problem seems to exist after I back up without a load. Hmmmmmm. I got this particular tractor at an auction and it was represented as not having a working TA. A combine engine had replaced the original. Other than that, I don't know much of anything.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|