Re: over haul questions?!?!?

Posted by Dann on January 01, 2002 at 21:40:17 from (209.43.17.46):

In Reply to: over haul questions?!?!? posted by Little Red on December 31, 2001 at 07:23:01:

Little Red! Lets ease up and go back to basics, the old Hs had a lot of heavy metal in them the sleeves can be taper cut at top if not worn completly out and honed. I went to a Buddies of mine to see what kind of a mess he got his self into with a H that was stuck! he soaked the cly real good we pushed the pistons out a week later, brokrn rings cracked pistons, cleaned the sleeves in place, He bought used pistons from a salavage yard in Minn. $10,00 each they looked real good, bought a ring set from a car parts place, ordered gaskets from Stiners? Bearings from Yesterdays parts source, A used governor from CT parts cat, Got a new tune up kit, and we put it all togather, Runs fine! With the paint and decals he told me he spent $348.00 Some thing to think about! Dann

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: over haul questions?!?!? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]