Crawlers, Dozers, Loaders & Backhoes Discussion Board |
Re: Re: Re: Re: Info on a Unit dozer or crain
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Guy Thompson on April 13, 2004 at 17:53:37 from (69.136.202.161):
In Reply to: Re: Re: Re: Info on a Unit dozer or crain posted by Greasy John on April 13, 2004 at 17:43:03:
John, Thanks for the info. I will check into it. I appreciate everyone's help. At this point I wanted to update some of the people here ( New Jersey ) who were interested in this, so I passed this on to them tonight. Hopefully, I am somewhat accurate on what I have come up with. All, Those members who have visited the Swamp Monster may be interested in some information I have dug up on that particular piece of equipment, and other pertinent info on it. The Swamp Monster was manufactured by the "Unit" Crane and Shovel Corporation of Waukesha (Milwaukee) Wisconsin, with offices or manufacturing plants in other cities. They produced several different models with different attachments on each one. Some were shovels, some were cranes, and there is an attachment with a magnet to move around scrap metal. So which particular model is ours?
In order to find that out, I took a photo of the serial number on a recent visit there, and started asking questions. Here is what I have found. Up until 1946, Unit used a common number system for all of their equipment, with the last piece made that year being serial number 2663. In 1947 they started using the last two digits of the year of completion as the serial number prefix, which then would be followed by the quantity number of the piece made to date. Here is the serial number of the Monster: http://www.njpinebarrens.com/~teegate/Serial.jpg So given that number is 51802, we now know that it was produced in 1951. I also learned that more than likely, it was built in November or December of that year because the 802 is slightly less than the machines built that year. I have not found out how many were actually built that year. I also learned that the two model numbers were the 514 and the 614, but I have not learned as of yet how that is determined. But from the photo's I have of it there is a clear consensus that it is a 614 which has a capacity of 5/8 of a yard. I would then assume that the 514 was the smaller one, with a capacity of 1/2 yards, and the size determines the model. Most of these units had the cab set a few feet above the deck gear hood which made for good visibility. But why was it left there and when? If anyone knows that I would be interested in that information. One would think that if it was new machine, the owners would not have left it there, and would have had it repaired if it had broke down. I have found out that this machine was made at least until 1960, so there would have most likely been parts for it available. Could it have been left there in the 60's? Here is a photo of a keychain showing the pre 1950 model.
http://www.exocoin.com/media/x-30-49.jpg Guy
Follow Ups:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|