Allis Chalmers Discussion Board |
Re: 1955 Allis Chalmers
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by steve(ill) on February 21, 2006 at 19:37:22 from (67.136.64.22):
In Reply to: 1955 Allis Chalmers posted by richard in CP on February 21, 2006 at 08:32:23:
not sure which model youhave, but the B-C tractors have the pump in the back of the motor. pump pushes oil down a hollow cam shaft. cam bearings are lubed from that. main bearings get lube thru holes from the cam bearing areas. pressure lube to the mains. the piston pins and rod bearings on the crank are spray lubed. holes in the cam shaft spray everything while the cam is turning.--- there is alos pressureized oil to the top end and rocker shaft is hollow. oil goes down the shaft and lubes all 8 rocker arms as oil leaks out around the endges and down stems of valves.
Replies:
Home
| Forums
Today's Featured Article -
Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
Latest Ad:
Super WD9.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|