Re: allis chalmers CA starter problems!!!

Posted by Dick L on February 26, 2011 at 07:03:50 from (71.244.182.212):

In Reply to: allis chalmers CA starter problems!!! posted by cody newcomb on February 25, 2011 at 17:54:07:

Actually the main ground from the starter to the torque tube is the locking stud.
I always jump from the starter and the locking stud. You can remove the starter switch from the starter and hold the jump cable clamp tight against the contact stud to make sure that the lack of turning of the starter is in the starter rather than in the wires or wire connections. If the starter spins good that way you would know that the starter was not your problem.

Replies:

• Re: allis chalmers CA starter problems!!! cody newcomb 13:58:53 03/01/11 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]