Posted by timis on March 15, 2011 at 10:10:03 from (70.58.223.239):
I put on the case board but no takers. My 4494 makes alot of hydraulic noise the last 2 times I've run it - specifically when I use the 3 pt hitch. These last 2 times have had a couple things in common - 1st is temp - about 30deg F - cold for normal use- I never warmed it up, just moving around yard - 2nd is the hydraulic oil level was about 5 gal over full - after draining down it has done it when run. Sounds like the pump is maxed out along with metal grinding only when hitch is raised- hitch raises fine everything operates good - remotes are stiff and powershift is slower - but they work ok and its colder - The guys who had it B4 me used lucas additive so it is thicker than hytran. Do I have a leak on my suction side of the pump where I'm sucking air, is the oil just that stiff - or is it time to send her packing. Gonna try new filters and oil first.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oliver 550 Clutch Overhaul Tips - by Greg Sheppard. I got my 1964 Oliver Model 550 (serial 141-139-519) second-hand and used it for several years before the clutch began to slip. After taking up the pedal linkage several times I saw it was going to take more than that. The engine had been leaking oil at the rear seal and I suspected
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
