Posted by GeneMO on March 09, 2011 at 15:44:37 from (76.4.166.249):
I have an almost new Bush hog brand front end loader on my 1968 Farmall 706. I also have a "carry all" and " pig carrier" I built while in high school.
What I am thinking about doing, is adapting them to fit on the front end bale carrier that came with the loader. More specifically the pig carrier as it has a steel cage around it.
I have a bunch of trees hanging over farm roads and field edges. I want to put a person in the loader with a chainsaw to cut the overhanging limbs.
I only have one hydraulic port, the tilt function comes from a joy stick.
Is there a safe way to do this? some sort of valve or coupler I can install in the hyd. line that in the rare event of a failure will not drop the person?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
