Posted by MCL on February 10, 2011 at 07:01:15 from (216.21.177.239):
Thanks all for the response. I was just reading the info that came with the controller. It is a Tekonsha Sentinel. It is fully electric. The newest instructions for GM are for 1999 models. I have it in a 2002. It has two adjustments. One is an inertia sensor to set the level. The other is rate of gain to set braking power. It has about a 70' range it has to be mounted to work properly. I have that o.k. It has a green light that comes on when trailer is plugged in that shows everything is juiced up properly. That works. I have juice through the plug to the trailer. It has a green light then 3 red lights that light up in sequence as you apply more brake. All I get is the green one. Never makes it into the red unless I work it by hand. I have the rate of gain cranked all the way up. Two of the trailers I pulled with a 1986 Chevy with same controller and everything worked fine. Other one I didn't have then. I was reading the instructions and may have stumbled over something. When it warms up a little I am going to reset the level inertia doodad and see if that helps. I though it was right but maybe not. If that doesn't help I guess I will start checking wiring and voltage to everything. If that is all good I guess I will replace the controller with a newer model. Don't know what else to do. Hate to spend money if I don't have to.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.