Posted by doug in illinois on January 14, 2011 at 15:14:33 from (173.233.168.193):
Anybody got any ideas how to make this crap easier to remove? Or not build up so fast?
This is on my mail route car, the right side is the worst because it has to drive in almost constantly to get to the mailboxes. I am having to stop several times a day and knock it out with a tire iron.
Waited too long yesterday between times, a frozen chunk dropped down and rubbed through the sidewall on the right rear tire. It is easy to clear under the front wells, just turn the steering either way and kick it out.
The rear wheels have near zero clearance, meaning I can't get behind the tires to knock out what is behind them.
It is going to be a LONG winter if this keeps up. I also have hay sold I need to move, but would like to see at least the mid 20's to do it. DOUG
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.