Posted by RMinVa on November 05, 2010 at 01:08:34 from (67.142.166.26):
In Reply to: OT Timber Sales posted by deerly parted on November 04, 2010 at 19:12:33:
The first thing you need to know is what you have.You won't know what it's worth until you have it cruised. After it's cruised you will know the footage of hardwood,softwood and pulpwood. You may have a website for your state that'll show timber prices that are up to date. Then do the math and you'll know what it's worth.
If you use a timber consultant he will do all that in a package. In my area we put the timber for sale up for auction to timber corp. for sealed bids. Just make sure you have the right to refuse the top bid. Many timber companies in my area stopped useing timber buyers and let the logger take all the risk.
Most land owners have no idea what their timber is worth and most get about half of what it's worth. Do your homework and know what you have before you try and sell it. Leaves have fallen in most places enough to get a good cruise now. perfect time to have it done now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.